Sayavur I. Bakhtiyarov¹, Dennis A. Siginer²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.2, pp. 99-112, 2008, DOI:10.3970/fdmp.2008.004.099

Abstract Levitation of liquid bodies against gravity is a contactless confinement process appropriate for manufacturing very pure materials. A variety of levitation techniques have been developed over the last few decades, such as aerodynamic, acoustic, electrostatic, microwave, and electromagnetic levitations. More recently, a new generation of novel techniques, essentially combinations of the established primary techniques, has been successfully introduced. Examples are acoustic-electric, aerodynamic-acoustic and acoustic-electromagnetic. The purpose of this series of papers in three parts, Bakhtiyarov and Siginer (2007a,b), is to review the advances in electromagnetic levitation (EML) since its introduction as a containerless melting technique, and a tool for the… More >

Adeline Tchikango Siagam¹, Gunther Brenner¹, Peter Giese², Volker Wesling²

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.2, pp. 77-84, 2008, DOI:10.3970/fdmp.2008.004.077

Abstract The PTA (''Plasma-Transferred-Arc'') is a widespread variant of plasma powder processes to manufacture coatings against corrosion or abrasion. For the optimization of this technique, an explanation of the processes which lead to a maximal deposition performance (i.e. maximal quantity of powder converted per time) is required. Especially the gas and particle flow in the region between the burner nozzle and the work piece is of interest. In the present study, flow simulations (Computational Fluid Dynamics, CFD) have been done in order to investigate the determining factors for the dimensioning of the processes. Additionally, velocity measurements have been obtained with PIV… More >

H. Khellafi¹, H.M. Meddah¹, B. Ould Chikh¹, B. Bouchouicha², M. Benguediab², M. Bendouba³

CMC-Computers, Materials & Continua, Vol.49-50, No.1, pp. 31-45, 2015, DOI:10.3970/cmc.2015.049.031

Abstract The polyvinyl chloride PVC is a polymer material widely used for a large variety of applications. The present work focuses on the identification of the physical processes responsible for the mechanical properties of the PVC containing different crystallinities rate applied in large deformation and different strain rates. In order to understand the behavior of the PVC, a thermodynamic modeling is needed. Therefore, the contribution of this approach was demonstrated by experiment and numerical modeling. This comparative study demonstrates that the proposed model provides better agreement with experimental evidence. More >

M. P. Muthuraj^1,2, K. Nithyapriya¹

CMC-Computers, Materials & Continua, Vol.48, No.2, pp. 119-132, 2015, DOI:10.3970/cmc.2015.048.119

Abstract The maintenance, upgrading and replacement of existing bridges have become urgent requirement and a challenging task for the construction sector. Bridge decks made of fibre reinforced polymers (FRP), have been widely adopted both in new construction and replacement of existing bridge decks. This paper reports the studies carried out hand lay-up multicellular glass fibre reinforced polymer. Multicellular bridge deck panels with various cross sectional profiles have been analysed using a general purpose finite element software ANSYS. A cross sectional profile that satisfied the deflection criteria with minimum weight was selected for analysis and fabrication. Six multicellular GFRP composite bridge deck… More >

E. Lescoute¹, T. De Rességuier¹, J.-M. Chevalier², J. Breil³, P.-H. Maire², G. Schurtz³

CMC-Computers, Materials & Continua, Vol.22, No.3, pp. 219-238, 2011, DOI:10.3970/cmc.2011.022.219

Abstract With the ongoing development of high energy laser facilities designed to achieve inertial confinement fusion, the ability to simulate debris ejection from metallic shells subjected to intense laser irradiation has become a key issue. We present an experimental and numerical study of fragmentation processes generating high velocity ejecta from laser shock-loaded metallic targets (aluminium and gold). Optical transverse shadowgraphy is used to observe and analyze dynamic fragmentation and debris ejection. Experimental results are compared to computations involving a fragmentation model based on a probabilistic description of material tensile strength. A correct overall consistency is obtained. More >

X.P. Shen¹, J.L. Feng²

CMC-Computers, Materials & Continua, Vol.20, No.2, pp. 185-204, 2010, DOI:10.3970/cmc.2010.020.185

Abstract The characteristic length of a gradient-dependent damage model is a key parameter, which is usually regarded as the length of damage process zone (DPZ). Value and evolution of the size of DPZ were investigated by both a numerical method and an experimental manner. In the numerical study, the geometrical model adopted was a set of four-point shearing beams; the numerical tool used was the Abaqus/Explicit software. The distance between the front and end of a complete DPZ was obtained. Values of strain components at these points were given out at given time points. The experimental study of the evolution process… More >

M.R. Khoshravan¹ and M.A. Setoodeh¹

CMC-Computers, Materials & Continua, Vol.16, No.3, pp. 195-228, 2010, DOI:10.3970/cmc.2010.016.195

Abstract The use of welding to permanently join plates is common in industry due to its high efficiency. But welding creates thermal stresses, which can lead to residual stresses and physical distortion. This phenomenon directly influences the buckling stiffness of the welded structure. The welding distortion not only makes difficult the erection of the project, but also influences the final quality and cost of production. In this research, the thermo-elastic-plastic conditions were simulated by a three-dimensional (3D) finite element model (FE). Mechanical and thermal properties of the material were applied to the model, leading to eigenvalue analysis of the thermal and… More >

XL Geng¹, KS Zhang², YQ Guo¹, L Qin¹

CMC-Computers, Materials & Continua, Vol.13, No.1, pp. 1-16, 2009, DOI:10.3970/cmc.2009.013.001

Abstract One of the problems in a micro-forming process is the grain size effect, which means the formed part consists of a single grain or several grains sometimes, so the material shows anisotropic or heterogeneous. Under these conditions, a conventional method, which based on the isotropic and homogeneous material hypothesis, is not suitable. In this paper, Experimental investigations into micro deep drawing of the copper single crystal were carried out and the pattern of the micro-cup and the drawing force were observed. Using crystal plasticity theory, a user material subroutine (VUMAT) was built and linked to ABAQUS, and the micro deep… More >