Sergey Galkin^1,*, Ian Savitckii¹, Denis Shustov¹, Artyom Kukhtinskii¹, Boris Osovetsky², Alexander Votinov³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.2, pp. 273-284, 2023, DOI:10.32604/fdmp.2022.021697

Abstract Survey and novel research data are used in the present study to classify/identify the lithological type of Verey age reservoirs’ rocks. It is shown how the use of X-ray tomography can clarify the degree of heterogeneity, porosity and permeability of these rocks. These data are then used to elaborate a model of hydraulic fracturing. The resulting software can take into account the properties of proppant and breakdown fluid, thermal reservoir conditions, oil properties, well design data and even the filtration and elastic-mechanical properties of the rocks. Calculations of hydraulic fracturing crack formation are carried out and the results are compared… More > Graphic Abstract

Zhenfeng Zhao¹, Bin Li¹, Zubo Su¹, Lijing Chang¹, Hongzheng Zhu¹, Ming Liu¹, Jialing Ma^2,*, Fan Wang¹, Qianwan Li¹

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.6, pp. 1781-1794, 2022, DOI:10.32604/fdmp.2022.019998

Abstract Often oilfield fractured horizontal wells produce water flowing in multiple directions. In this study, a method to identify such channeling paths is developed. The dual-medium model is based on the principle of inter-well connectivity and considers the flow characteristics and related channeling terms. The Lorentz curve is drawn to qualitatively discern the geological type of the low-permeability fractured reservoir and determine the channeling direction and size. The practical application of such an approach to a sample oilfield shows that it can accurately identify the channeling paths of the considered low-permeability fractured reservoir and predict production performances according to the inter-well… More >

Xiang Rao^1,2,*, Yina Liu^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.131, No.3, pp. 1403-1429, 2022, DOI:10.32604/cmes.2022.018879

Abstract Projection-based embedded discrete fracture model (pEDFM) is an effective numerical model to handle the flow in fractured reservoirs, with high efficiency and strong generalization of flow models. However, this paper points out that pEDFM fails to handle flow barriers in most cases, and identifies the physical projection configuration of fractures is a key step in pEDFM. This paper presents and proves the equivalence theorem, which explains the geometric nature of physical projection configurations of fractures, that is, the projection configuration of a fracture being physical is equivalent to it being topologically homeomorphic to the fracture, by analyzing the essence of… More >

M. N. Tarhuni^*, W. R. Sulaiman, M. Z. Jaafar, M. Milad, A. M. Alghol

Energy Engineering, Vol.118, No.4, pp. 761-795, 2021, DOI:10.32604/EE.2021.016645

Abstract Fluid flow in fractured media has been studied for decades and received considerable attention in the oil and gas industry because of the high productivity of naturally fractured reservoirs. Due to formation complexity and reservoir heterogeneity, characterizing fluid flow with an appropriate reservoir model presents a challenging task that differs relatively from homogeneous conventional reservoirs in many aspects of view, including geological, petrophysical, production, and economics. In most fractured reservoirs, fracture networks create complex pathways that affect hydrocarbon flow, well performance, hence reservoir characterization. A better and comprehensive understanding of the available reservoir modeling approaches is much needed to accurately… More >