J. Sladek¹, V. Sladek¹, J. Krivacek¹, Ch. Zhang²

CMES-Computer Modeling in Engineering & Sciences, Vol.8, No.3, pp. 259-270, 2005, DOI:10.3970/cmes.2005.008.259

Abstract A meshless method based on the local Petrov-Galerkin approach is presented for stress analysis in three-dimensional (3-d) axisymmetric linear elastic solids with continuously varying material properties. The inertial effects are considered in dynamic problems. A unit step function is used as the test functions in the local weak-form. It is leading to local boundary integral equations (LBIEs). For transient elastodynamic problems the Laplace-transform technique is applied and the LBIEs are given in the Laplace-transformed domain. Axial symmetry of the geometry and the boundary conditions for a 3-d linear elastic solid reduces the original 3-d boundary value problem into a 2-d… More >

Peter L. Bishay¹, Jan Sladek², Vladimir Sladek², Satya N. Atluri¹

CMC-Computers, Materials & Continua, Vol.29, No.3, pp. 213-262, 2012, DOI:10.3970/cmc.2012.029.213

Abstract A new class of hybrid/mixed finite elements, denoted "HMFEM-C", has been developed for modeling magneto-electro-elastic (MEE) materials. These elements are based on assuming independent strain-fields, electric and magnetic fields, and collocating them with the strain-fields, electric and magnetic fields derived from the primal variables (mechanical displacements, electric and magnetic potentials) at some cleverly chosen points inside each element. The newly developed elements show significantly higher accuracy than the primal elements for the electric, magnetic as well as the mechanical variables. HMFEM-C is invariant through the use of the element-fixed local orthogonal base vectors, and is stable since it is not… More >

Yaping Zhang¹, Qifeng Fan², Leiting Dong^2,3, Satya N. Atluri⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.112, No.1, pp. 1-32, 2016, DOI:10.3970/cmes.2016.112.001

Abstract Similar to the very vast prior literature on analyzing laminated composite structures, "higher-order" and "layer-wise higher-order" plate and shell theories for functionally-graded (FG) materials and structures are also widely popularized in the literature of the past two decades. However, such higher-order theories involve (1) postulating very complex assumptions for plate/shell kinematics in the thickness direction, (2) defining generalized variables of displacements, strains, and stresses, and (3) developing very complex governing equilibrium, compatibility, and constitutive equations in terms of newly-defined generalized kinematic and generalized kinetic variables. Their industrial applications are thus hindered by their inherent complexity, and the fact that it… More >

Mohammad Hossein Ghadiri Rad¹, Farzad Shahabian^1,2, Seyed Mahmoud Hosseini³

CMES-Computer Modeling in Engineering & Sciences, Vol.108, No.3, pp. 135-157, 2015, DOI:10.3970/cmes.2015.108.135

Abstract A meshless method based on the local Petrov-Galerkin approach is developed for elasto-dynamic analysis of geometrically nonlinear two dimensional (2D) problems in hyper-elastic functionally graded materials. The radial point interpolation method (RPIM) is utilized to build the shape functions and the Heaviside step function is used as the test function. The mechanical properties of functionally graded material are considered to continuously vary in a certain direction and are simulated using a nonlinear power function in volume fraction form. Considering the large deformations, it is assumed that the domain be made of large deformable neo-Hookean hyperelastic materials. Rayleigh damping is employed… More >

Chih-Ping Wu^1,2, Ruei-Yong Jiang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.97, No.3, pp. 239-279, 2014, DOI:10.3970/cmes.2014.097.239

Abstract A state space differential reproducing kernel (DRK) method is developed for the three-dimensional (3D) buckling analysis of simply-supported, carbon nanotube-reinforced composite (CNTRC) circular hollow cylinders and laminated composite ones under axial compression. The single-walled carbon nanotubes (CNTs) and polymer are used as the reinforcements and matrix, respectively, to constitute the CNTRC cylinder. Three different distributions of CNTs varying in the thickness direction are considered (i.e., the uniform distribution and functionally graded rhombus-, and X-type ones), and the through-thickness distributions of effective material properties of the cylinder are determined using the rule of mixtures. The 3D linear buckling theory is used,… More >

Da-Guang Zhang^1,2, Hao-Miao Zhou¹

CMES-Computer Modeling in Engineering & Sciences, Vol.100, No.3, pp. 201-222, 2014, DOI:10.3970/cmes.2014.100.201

Abstract A model of FGM beams resting on nonlinear elastic foundations is put forward by physical neutral surface and high-order shear deformation theory. Material properties are assumed to be temperature dependent and von Kármán strain-displacement relationships are adopted. Nonlinear bending and thermal postbuckling are given by multi-term Ritz method, and influences played by different supported boundaries, thermal environmental conditions, different elastic foundations, and volume fraction index are discussed in detail. It is worth noting that the effect of nonlinear elastic foundation increases with increasing deflection. More >

S. Brischetto¹

CMES-Computer Modeling in Engineering & Sciences, Vol.95, No.5, pp. 391-430, 2013, DOI:10.3970/cmes.2013.095.391

Abstract This paper gives an exact three-dimensional elastic model for the free vibration analysis of functionally graded one-layered and sandwich simply-supported plates and shells. An exact elasticity solution is proposed for the differential equations of equilibrium written in general orthogonal curvilinear coordinates. The equations consider a geometry for shells without simplifications, and allow the analysis of the cases of spherical shell panels, cylindrical shell panels, cylindrical closed shells and plates. The main novelty is the possibility of a general formulation for these geometries. The coefficients in equilibrium equations depend on the thickness coordinate because of the radii of curvature for the… More >

Seyed Mahmoud Hosseini ¹

CMES-Computer Modeling in Engineering & Sciences, Vol.95, No.1, pp. 1-29, 2013, DOI:10.3970/cmes.2013.095.001

Abstract In this article, the effects of carbon nanotubes distributions on natural frequency are studied for a functionally graded nanocomposite thick hollow cylinder reinforced by single-walled carbon nanotubes using a hybrid mesh-free method. The FG nanocomposite cylinder is excited by a shock loading, which is applied on the inner surface of cylinder. The first natural frequency is obtained for various nonlinear grading patterns of distributions of the aligned carbon nanotubes. The effects of various nonlinear grading patterns on natural frequency are obtained and discussed in details. The presented hybrid mesh-free method is based on the generalized finite difference (GFD) method for… More >

Lijun Xue¹, Guansuo Dui^1,2, Bingfei Liu³

CMES-Computer Modeling in Engineering & Sciences, Vol.93, No.1, pp. 1-16, 2013, DOI:10.3970/cmes.2013.093.001

Abstract The Functionally Graded Shape Memory Alloy (FG-SMA) is a new kind of functional materials which possesses the excellent properties of both Shape Memory Alloy (SMA) and Functionally Graded Material (FGM). A macro constitutive model of FG-SMA is established by using the theory of the mechanics of composites and the existing SMA model. With this macro constitutive model, the mechanical behavior of a FG-SMA beam composed by elastic material A and SMA subjected to pure bending is investigated. The loading processes including elastic process and phase transformation process are discussed in detail and the analytical solutions are obtained. What is more,… More >

A.V. Ekhlakov^1,2, O.M. Khay^1,3, Ch. Zhang¹, X.W. Gao⁴, J. Sladek⁵, V. Sladek⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.92, No.6, pp. 595-614, 2013, DOI:10.3970/cmes.2013.092.595

Abstract A boundary-domain integral equation method is applied to the transient thermoelastic crack analysis in functionally graded materials. Fundamental solutions for homogeneous, isotropic and linear elastic materials are used to derive the boundary-domain integral equations. The radial integration method, the Cartesian transformation method and the cell-integration method are applied for the evaluation of the arising domain-integrals. Numerical results for dynamic stress intensity factors obtained by the three approaches are presented, compared and discussed to show the accuracy and the efficiency of the domain-integral evaluation techniques. More >