Nisha Vasudevan^1,*, Vasudevan Venkatraman², A. Ramkumar¹, T. Muthukumar³, A. Sheela⁴, M. Vetrivel⁵, R. J. Vijaya Saraswathi⁶, F. T. Josh⁷

Energy Engineering, Vol.120, No.8, pp. 1747-1761, 2023, DOI:10.32604/ee.2023.027821

Abstract MigroGrid (MG) has emerged to resolve the growing demand for energy. But because of its inconsistent output, it can result in various power quality (PQ) issues. PQ is a problem that is becoming more and more important for the reliability of power systems that use renewable energy sources. Similarly, the employment of nonlinear loads will introduce harmonics into the system and, as a result, cause distortions in the current and voltage waveforms as well as low power quality issues in the supply system. Thus, this research focuses on power quality enhancement in the MG using hybrid shunt filters. However, the… More >

Slim Ben Chaabane^1,2,*, Rafika Harrabi^1,2, Anas Bushnag¹, Hassene Seddik²

Journal on Artificial Intelligence, Vol.4, No.4, pp. 201-214, 2022, DOI:10.32604/jai.2022.032850

Abstract Biometrics represents the technology for measuring the characteristics of the human body. Biometric authentication currently allows for secure, easy, and fast access by recognizing a person based on facial, voice, and fingerprint traits. Iris authentication is one of the essential biometric methods for identifying a person. This authentication type has become popular in research and practical applications. Unlike the face and hands, the iris is an internal organ, protected and therefore less likely to be damaged. However, the number of helpful information collected from the iris is much greater than the other biometric human organs. This work proposes a new… More >

A. Manju¹, A. Revathi², M. Arivukarasi¹, S. Hariharan³, V. Umarani⁴, Shih-Yu Chen^5,*, Jin Wang⁶

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 905-920, 2023, DOI:10.32604/iasc.2023.038444

Abstract With the proliferation of the internet, big data continues to grow exponentially, and video has become the largest source. Video big data introduces many technological challenges, including compression, storage, transmission, analysis, and recognition. The increase in the number of multimedia resources has brought an urgent need to develop intelligent methods to organize and process them. The integration between Semantic link Networks and multimedia resources provides a new prospect for organizing them with their semantics. The tags and surrounding texts of multimedia resources are used to measure their semantic association. Two evaluation methods including clustering and retrieval are performed to measure… More >

Lei Shen^*, Ting Huang, Nishui Cai, Hao Wu

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 507-524, 2023, DOI:10.32604/iasc.2023.037640

Abstract Through the use of the internet and cloud computing, users may access their data as well as the programmes they have installed. It is now more challenging than ever before to choose which cloud service providers to take advantage of. When it comes to the dependability of the cloud infrastructure service, those who supply cloud services, as well as those who seek cloud services, have an equal responsibility to exercise utmost care. Because of this, further caution is required to ensure that the appropriate values are reached in light of the ever-increasing need for correct decision-making. The purpose of this… More >

Peichen Zhao¹, Qi Yue^2,*, Zhibin Deng³

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 849-873, 2023, DOI:10.32604/iasc.2023.037090

Abstract In previous research on two-sided matching (TSM) decision, agents’ preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets. Nowdays, the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality. Probability hesitant fuzzy sets, however, have grown in popularity due to their advantages in communicating complex information. Therefore, this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information. The agent attribute weight vector should be obtained by using the… More >

Aoqi Xu¹, Khalid A. Alattas², Nasreen Kausar³, Ardashir Mohammadzadeh⁴, Ebru Ozbilge^5,*, Tonguc Cagin⁵

Intelligent Automation & Soft Computing, Vol.37, No.1, pp. 17-32, 2023, DOI:10.32604/iasc.2023.036623

Abstract In many problems, to analyze the process/metabolism behavior, a model of the system is identified. The main gap is the weakness of current methods vs. noisy environments. The primary objective of this study is to present a more robust method against uncertainties. This paper proposes a new deep learning scheme for modeling and identification applications. The suggested approach is based on non-singleton type-3 fuzzy logic systems (NT3-FLSs) that can support measurement errors and high-level uncertainties. Besides the rule optimization, the antecedent parameters and the level of secondary memberships are also adjusted by the suggested square root cubature Kalman filter (SCKF).… More >

Sagheer Abbas¹, Shabib Aftab^1,2, Muhammad Adnan Khan^3,4, Taher M. Ghazal^5,6, Hussam Al Hamadi⁷, Chan Yeob Yeun^8,*

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 6083-6100, 2023, DOI:10.32604/cmc.2023.037933

Abstract The software engineering field has long focused on creating high-quality software despite limited resources. Detecting defects before the testing stage of software development can enable quality assurance engineers to concentrate on problematic modules rather than all the modules. This approach can enhance the quality of the final product while lowering development costs. Identifying defective modules early on can allow for early corrections and ensure the timely delivery of a high-quality product that satisfies customers and instills greater confidence in the development team. This process is known as software defect prediction, and it can improve end-product quality while reducing the cost… More >

Azimbek Khudoyberdiev¹, Mohammed Abdul Jaleel¹, Israr Ullah², DoHyeun Kim^3,*

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 5471-5499, 2023, DOI:10.32604/cmc.2023.036898

Abstract The requirement for high-quality seafood is a global challenge in today’s world due to climate change and natural resource limitations. Internet of Things (IoT) based Modern fish farming systems can significantly optimize seafood production by minimizing resource utilization and improving healthy fish production. This objective requires intensive monitoring, prediction, and control by optimizing leading factors that impact fish growth, including temperature, the potential of hydrogen (pH), water level, and feeding rate. This paper proposes the IoT based predictive optimization approach for efficient control and energy utilization in smart fish farming. The proposed fish farm control mechanism has a predictive optimization… More >

Abida Sharif¹, Imran Sharif¹, Muhammad Asim Saleem², Muhammad Attique Khan³, Majed Alhaisoni⁴, Marriam Nawaz^5,6, Abdullah Alqahtani⁷, Ye Jin Kim⁸, Byoungchol Chang^9,*

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 5379-5393, 2023, DOI:10.32604/cmc.2023.034413

Abstract The Internet of Vehicles (IoV) is a networking paradigm related to the intercommunication of vehicles using a network. In a dynamic network, one of the key challenges in IoV is traffic management under increasing vehicles to avoid congestion. Therefore, optimal path selection to route traffic between the origin and destination is vital. This research proposed a realistic strategy to reduce traffic management service response time by enabling real-time content distribution in IoV systems using heterogeneous network access. Firstly, this work proposed a novel use of the Ant Colony Optimization (ACO) algorithm and formulated the path planning optimization problem as an… More >

Mahmoud Mohamed^1,2,*, Bdereddin Abdul Samad^1,3, Fatih Anayi¹, Michael Packianather¹, Khalid Yahya⁴

CMC-Computers, Materials & Continua, Vol.75, No.3, pp. 4681-4696, 2023, DOI:10.32604/cmc.2023.035312

Abstract The Robogymnast is a highly complex, three-link system based on the triple-inverted pendulum and is modelled on the human example of a gymnast suspended by their hands from the high bar and executing larger and larger upswings to eventually rotate fully. The links of the Robogymnast correspond respectively to the arms, trunk, and lower limbs of the gymnast, and from its three joints, one is under passive operation, while the remaining two are powered. The passive top joint poses severe challenges in attaining the smooth movement control needed to operate the Robogymnast effectively. This study assesses four types of controllers… More >