Abid. A. Memon¹, M. Asif Memon¹, Kaleemullah Bhatti¹, Kamsing Nonlaopon^2,*, Ilyas Khan³

CMC-Computers, Materials & Continua, Vol.70, No.3, pp. 4341-4355, 2022, DOI:10.32604/cmc.2022.019407

Abstract This article is intended to examine the fluid flow patterns and heat transfer in a rectangular channel embedded with three semi-circular cylinders comprised of steel at the boundaries. Such an organization is used to generate the heat exchangers with tube and shell because of the production of more turbulence due to zigzag path which is in favor of rapid heat transformation. Because of little maintenance, the heat exchanger of such type is extensively used. Here, we generate simulation of flow and heat transfer using non-isothermal flow interface in the Comsol multiphysics 5.4 which executes the Reynolds averaged Navier stokes equation… More >

Changkye Lee¹, Sundararajan Natarajan², Jack S. Hale³, Zeike A. Taylor⁴, Jurng-Jae Yee^1,*, Stéphane P. A. Bordas^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.2, pp. 411-436, 2021, DOI:10.32604/cmes.2021.014947

Abstract This work presents a locking-free smoothed finite element method (S-FEM) for the simulation of soft matter modelled by the equations of quasi-incompressible hyperelasticity. The proposed method overcomes well-known issues of standard finite element methods (FEM) in the incompressible limit: the over-estimation of stiffness and sensitivity to severely distorted meshes. The concepts of cell-based, edge-based and node-based S-FEMs are extended in this paper to three-dimensions. Additionally, a cubic bubble function is utilized to improve accuracy and stability. For the bubble function, an additional displacement degree of freedom is added at the centroid of the element. Several numerical studies are performed demonstrating… More >

Abdelraheem M. Aly^{1, 2, *}, Mitsuteru Asai³, Ehab Mahmoud Mohamed^{4, 5}

CMC-Computers, Materials & Continua, Vol.65, No.1, pp. 205-224, 2020, DOI:10.32604/cmc.2020.09227

Abstract In the present work, an incompressible smoothed particle hydrodynamic (SPH) method is introduced to simulate water-soil-structure interactions. In the current calculation, the water is modelled as a Newtonian fluid. The soil is modelled in two different cases. In the first case, the granular material is considered as a fluid where a Bingham type constitutive model is proposed based on Mohr-Coulomb yield-stress criterion, and the viscosity is derived from the cohesion and friction angle. In addition, the fictitious suspension layers between water and soil depending on the concentration of soil are introduced. In the second case, Hooke’s law introduces elastic soil.… More >

Huawen Shu, Minghai Xu, Xinyue Duan^*, Yongtong Li, Yu Sun, Ruitian Li, Peng Ding

CMES-Computer Modeling in Engineering & Sciences, Vol.123, No.2, pp. 509-523, 2020, DOI:10.32604/cmes.2020.08806

Abstract A finite volume method based unstructured grid is presented to solve the two dimensional viscous and incompressible flow. The method is based on the pressure-correction concept and solved by using a semi-staggered grid technique. The computational procedure can handle cells of arbitrary shapes, although solutions presented in this paper were only involved with triangular and quadrilateral cells. The pressure or pressure-correction value was stored on the vertex of cells. The mass conservation equation was discretized on the dual cells surrounding the vertex of primary cells, while the velocity components and other scale variables were saved on the central of primary… More >

S. Kshrisagar¹, A. Francis¹, J. J. Yee², S. Natarajan¹, C. K. Lee^3,*

CMC-Computers, Materials & Continua, Vol.61, No.2, pp. 481-502, 2019, DOI:10.32604/cmc.2019.07967

Abstract In this paper, the node based smoothed-strain Abaqus user element (UEL) in the framework of finite element method is introduced. The basic idea behind of the node based smoothed finite element (NSFEM) is that finite element cells are divided into subcells and subcells construct the smoothing domain associated with each node of a finite element cell [Liu, Dai and Nguyen-Thoi (2007)]. Therefore, the numerical integration is globally performed over smoothing domains. It is demonstrated that the proposed UEL retains all the advantages of the NSFEM, i.e., upper bound solution, overly soft stiffness and free from locking in compressible and nearly-incompressible… More >

H.S. Wijesinghe¹, N.G. Hadjiconstantinou²

CMES-Computer Modeling in Engineering & Sciences, Vol.5, No.6, pp. 515-526, 2004, DOI:10.3970/cmes.2004.005.515

Abstract We present an implicit hybrid atomisticcontinuum formulation for unsteady, viscous, incompressible flows. The coupling procedure is derived from a domain decomposition method known as the Schwarz alternating method. A dilute gas impulsive Couette flow test problem is used to verify the hybridscheme. Finally, a method to reduce computational costs through limited ensemble averaging is presented. The implicit formulation proposed here is expected to be significantly faster than a time explicit approach based on a compressible formulation for the simulation of low speed flows such as those found in micro- and nano–scale devices. More >

G. C. Bourantas¹, E. D. Skouras^2,3, V. C. Loukopoulos⁴, G. C. Nikiforidis¹

CMES-Computer Modeling in Engineering & Sciences, Vol.64, No.2, pp. 187-212, 2010, DOI:10.3970/cmes.2010.064.187

Abstract Meshfree point collocation method (MPCM) is developed, solving the velocity-vorticity formulation of Navier-Stokes equations, for two-dimensional, steady state incompressible viscous flow problems in the presence of heat transfer. Particular emphasis is placed on the application of the velocity-correction method, ensuring the continuity equation. The Gaussian Radial Basis Functions (GRBF) interpolation is employed to construct the shape functions in conjunction with the framework of the point collocation method. The cases of forced, natural and mixed convection in a 2D rectangular enclosure are examined. The accuracy and the stability of the proposed scheme are demonstrated through three representative, well known and established… More >

D.-A. An-Vo, N. Mai-Duy, T. Tran-Cong

The International Conference on Computational & Experimental Engineering and Sciences, Vol.16, No.3, pp. 87-88, 2011, DOI:10.3970/icces.2011.016.087

Abstract In this paper, we develop a control-volume technique based on 2-node integrated-radial-basis-function elements (IRBFEs) for the numerical solution of steady incompressible flows governed by the stream function-vorticity formulation. The fluid domain is discretised by a Cartesian grid from which non-overlapping rectangular control- volumes are formed. Line integrals arising from the integration of the diffusion and convection terms over control volumes are evaluated using the middle-point rule. The convection term is effectively treated by the upwind scheme with deferred correction strategy. Instead of using conventional low-order polynomials, all physical quantities at the interfaces are presently estimated by means of 2-node IRBFEs.… More >

Jingfa Li^1,2, Shuyu Sun^2,*, Bo Yu¹, Yang Liu², Tao Zhang²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.22, No.3, pp. 141-142, 2019, DOI:10.32604/icces.2019.04721

Abstract The multiphase fluid flow in porous media is one of the most fundamental phenomena in various physical processes, such as oil/gas flow in reservoir, subsurface contamination dispersion, chemical separation, etc. Due to its importance, the efficient and accurate solution and prediction of multiphase flow in porous media is highly required in engineering applications and mechanism studies, which has been a research hot spot with increasing interest in recent years. However, the strong nonlinearity implicated in the multiphase flow model has brought great challenges for the computation and analysis. In addition, the permeability in Darcy-type pressure equation is always represented as… More >

Kazuhiko Kakuda¹, Tomohiro Aiso¹, Shinichiro Miura²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.4, No.1, pp. 11-18, 2007, DOI:10.3970/icces.2007.004.011

Abstract The applications of a finite element scheme to three-dimensional incompressible viscous fluid flows are presented. The scheme is based on the Petrov-Galerkin weak formulation with exponential weighting functions. The incompressible Navier-Stokes equations are numerically integrated in time by using a fractional step strategy with second-order accurate Adams-Bashforth scheme for both advection and diffusion terms. Numerical solutions for flow around a circular cylinder and flow around a railway vehicle in a tunnel are presented. More >