Islam Ali¹, Musawwer Khan¹, Waqar Mehmood¹, Wasif Nisar¹, Waqar Aslam², Muhammad Qaiser Saleem³, Majzoob K. Omer³, Muhammad Shafiq^4,*

Intelligent Automation & Soft Computing, Vol.27, No.3, pp. 605-623, 2021, DOI:10.32604/iasc.2021.014639

Abstract Capability Maturity Model Integration (CMMI) is a world-renowned framework for software process improvement, which specifies “What-To-Do” in terms of requirements. However, it leaves the “How-To-Do” part regarding implementation to implementers. The software industry especially software SMEs (SSMEs) faces difficulties in implementing the Specific Practices (SPs) of Various Process Areas (PAs). Configuration Management Process Area (CM-PA) is usually ignored despite its acknowledged importance in the software development process. Establishing integrity is one of the three Specific Goals (SGs) that CMMI ver. 1.3 requires for successful implementation of CM-PA. This goal is achieved through the implementation of two SPs (i.e., 3.1 and… More >

Fahad A. Alzahrani¹, Masood Ahmad², Mohd Nadeem², Rajeev Kumar^2,3,*, Raees Ahmad Khan²

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 3619-3633, 2021, DOI:10.32604/cmc.2021.014869

Abstract The present study examines the various techniques being used to maintain the integrity of the medical devices, and develops a quantitative framework to list these in the sequence of priority. To achieve the intended objective, the study employs the combined procedure of Fuzzy Analytic Network Process (ANP) and Fuzzy Technical for Order Preference by Similarities to Ideal Solution (TOPSIS). We selected fuzzy based decision making techniques for assessing the integrity of medical devices. The suggested methodology was then used for classifying the suitable techniques used to evaluate the integrity of medical devices. Different techniques or the procedures of integrity assessment… More >

V. Manikandan^1,*, M. Sivaram¹, Amin Salih Mohammed², V. Porkodi³, K. Shankar⁴

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 4005-4018, 2021, DOI:10.32604/cmc.2021.014643

Abstract Wireless Sensor Networks (WSN) has been extensively utilized as a communication model in Internet of Things (IoT). As well, to offer service, numerous IoT based applications need effective transmission over unstable locations. To ensure reliability, prevailing investigations exploit multiple candidate forwarders over geographic opportunistic routing in WSNs. Moreover, these models are affected by crucial denial of service (DoS) attacks, where huge amount of invalid data are delivered intentionally to the receivers to disturb the functionality of WSNs. Here, secure localization based authentication (SLA) is presented to fight against DoS attack, and to fulfil the need of reliability and authentication. By… More >

Gi-Wan Hong¹, Jeong-Wook Kim¹, Hangbae Chang^2,*

CMC-Computers, Materials & Continua, Vol.67, No.2, pp. 1489-1501, 2021, DOI:10.32604/cmc.2021.013344

Abstract Hyper-connectivity in Industry 4.0 has resulted in not only a rapid increase in the amount of information, but also the expansion of areas and assets to be protected. In terms of information security, it has led to an enormous economic cost due to the various and numerous security solutions used in protecting the increased assets. Also, it has caused difficulties in managing those issues due to reasons such as mutual interference, countless security events and logs’ data, etc. Within this security environment, an organization should identify and classify assets based on the value of data and their security perspective, and… More >

Huajing Guo, Baijian Wu, Zhaoxia Li^*

Structural Durability & Health Monitoring, Vol.14, No.1, pp. 37-50, 2020, DOI:10.32604/sdhm.2020.08442

Abstract In order to resolve the safety problem of the existing crane runway girders (CRGs) with defects, the constraint-based R6 criterion is proposed to assess their structural integrity. The existing steel CRGs with defects at the weld joint between the upper flange and web plate, are characterized to three-dimensional finite element models with a semi-ellipse surface crack. The R6 criterion has been modified by considering the constraint effect which is represented by T-stress. The analysis results illustrate that working condition of the cracked CRGs leads to high constraint level along the crack front. The crack aspect ratio (a/c) and runway eccentricity… More >

Wangdong Jiang¹, Taian Yang^{1, *}, Guang Sun^{1, 3}, Yucai Li¹, Yixuan Tang², Hongzhang Lv¹, Wenqian Xiang¹

Journal on Big Data, Vol.1, No.3, pp. 117-134, 2019, DOI:10.32604/jbd.2019.08454

Abstract In order to study deeply the prominent problems faced by China’s clean government work, and put forward effective coping strategies, this article analyzes the network information of anti-corruption related news events, which is based on big data technology. In this study, we take the news report from the website of the Communist Party of China (CPC) Central Commission for Discipline Inspection (CCDI) as the source of data. Firstly, the obtained text data is converted to word segmentation and stop words under preprocessing, and then the pre-processed data is improved by vectorization and text clustering, finally, after text clustering, the key… More >

G. Savaidis¹, M. Malikoutsakis¹, A. Jagenbrein², A. Savaidis³, M. Soare⁴, M.V. Predoi⁴, A. Soare⁴, I.C. Diba⁴

Structural Durability & Health Monitoring, Vol.9, No.2, pp. 129-154, 2013, DOI:10.32604/sdhm.2013.009.129

Abstract Development of corrosion or/and fatigue crack propagation are the most common causes of structural degradation in road and railway tank vessels. An acoustic emission based monitoring procedure in conjunction with follow-up nondestructive testing is here proposed as a promising alternative to the conventional inspection processes enabling continuous health monitoring of the tank structures. Thereby, finite element analysis taking the respective ADR and RID tank design loads into account is proposed as a capable tool to be applied in early stages of development to reveal the hot spot areas, where acoustic emission sensors have to be positioned. The developed health monitoring… More >

C. Colombo¹, E.G. Marchesin¹, L. Vergani^1,2, E. Boccafogli³, G. Verni³

Structural Durability & Health Monitoring, Vol.8, No.4, pp. 307-328, 2012, DOI:10.32604/sdhm.2012.008.307

Abstract In this study an experimental device for testing the structural integrity of lower limb (transtibial and transfemoral) prostheses is proposed and studied, in accordance with the ISO 10328 Standard. Aim of the development of this device is to mechanically test these kinds of prostheses, for claiming the compliance with the standard. In the first part of the paper, experimental setup of the laboratory is described for the different kinds of prescribed tests. In the second part, the test case of a transtibial prosthesis for children is proposed. After verifying the compliance with the standard of the studied prosthesis, values recorded… More >

Xue-Ren Wu¹

Structural Durability & Health Monitoring, Vol.6, No.2, pp. 77-88, 2010, DOI:10.3970/sdhm.2010.006.077

Abstract A review of the state-of-the-art is presented on the weight function method for fracture-mechanics-based structural integrity assessment with regard to crack-like defects. The weight function method provides a powerful tool for the determination of key parameters, such as stress intensity factors and crack opening displacements for cracked structural components. For two dimensional (2D) crack problems, weight functions were obtained in closed-form for both centre-and edge-crack configurations. For three dimensional(3D) cases, a combination of the closed-form 2D weight functions and the slice synthesis technique makes it possible for rapid determination of stress intensity factor at any point along the crack front.… More >

Kamran Nikbin¹

Structural Durability & Health Monitoring, Vol.3, No.1, pp. 51-68, 2007, DOI:10.3970/sdhm.2007.003.051

Abstract Weldments and welded regions of components are likely to see failure at elevated temperatures earlier than homogenous parent material. In some cases variable loading could also introduce creep/fatigue crack growth. These weld regions not only contain variable creep properties but are likely to contain residual stresses which could relax in time. There are three key factors which may determine a successful outcome for remaining life assessment of engineering components containing residual stresses in the vicinity of welds. The first is standardized testing and measurement procedures. The second is the development of appropriate and accurate correlating parameters to treat the results… More >