Kuo-Ning Chiang¹, Chan-Yen Chou², Chung-Jung Wu²,Chao-Jen Huang², Ming-Chih Yew²

CMES-Computer Modeling in Engineering & Sciences, Vol.37, No.1, pp. 85-96, 2008, DOI:10.3970/cmes.2008.037.085

Abstract An atomic-level analytical solution, together with a modified Morse potential, has been developed to estimate temperature-dependent thermal expansion coefficients (CTE) and elastic characteristics of bulk metals. In this study, inter-atomic forces are considered as a set of anharmonic oscillator networks which can be described by Morse potential, while the material properties can be defined by these inter-atomic forces; when temperature increases, the vibration of the anharmonic oscillator causes the phenomenon of temperature-dependent material properties. The results of analysis showed that the original Morse potential can give a reasonable prediction of the thermal expansion coefficients and elastic constants of metals at… More >

H. Zheng¹, X. Peng^1,2,3, N. Hu^1,4

CMES-Computer Modeling in Engineering & Sciences, Vol.86, No.6, pp. 505-532, 2012, DOI:10.3970/cmes.2012.086.505

Abstract The static and kinematic shakedown of a functionally graded plate (FGP) is analyzed. The FGP is subjected coupled constant mechanical load and cyclically varying temperature. The FGP is composed of elastoplastic matrix and elastic particles, with the particle volume fraction varying along its thickness. The thermal and mechanical properties and their distributions are evaluated with a mean filed approach, which is based on the Eshelby's inclusion theory and takes into account directly the interaction between particles. The FGP is assumed to be separated into a number of thin layers, the thermal and mechanical properties in the thickness direction of each… More >

K. Umesh¹, R. Ganguli¹

CMC-Computers, Materials & Continua, Vol.41, No.3, pp. 215-240, 2014, DOI:10.3970/cmc.2014.041.215

Abstract Fractal dimension based damage detection method is investigated for a composite plate with random material properties. Composite material shows spatially varying random material properties because of complex manufacturing processes. Matrix cracks are considered as damage in the composite plate. Such cracks are often seen as the initial damage mechanism in composites under fatigue loading and also occur due to low velocity impact. Static deflection of the cantilevered composite plate with uniform loading is calculated using the finite element method. Damage detection is carried out based on sliding window fractal dimension operator using the static deflection. Two dimensional homogeneous Gaussian random… More >

Leiting Dong^1,2, Salah H. Gamal³, Satya N. Atluri^2,4

CMC-Computers, Materials & Continua, Vol.37, No.1, pp. 1-21, 2013, DOI:10.3970/cmc.2013.037.001

Abstract In this paper, a simple and reliable procedure of stochastic computation is combined with the highly accurate and efficient Trefftz Computational Grains (TCG), for a direct numerical simulation (DNS) of heterogeneous materials with microscopic randomness. Material properties of each material phase, and geometrical properties such as particles sizes and distribution, are considered to be stochastic with either a uniform or normal probabilistic distributions. The objective here is to determine how this microscopic randomness propagates to the macroscopic scale, and affects the stochastic characteristics of macroscopic material properties. Four steps are included in this procedure: (1) using the Latin hypercube sampling,… More >

W. F. Yuan^1,2, H. B. Zhang¹

CMC-Computers, Materials & Continua, Vol.16, No.2, pp. 117-126, 2010, DOI:10.3970/cmc.2010.016.117

Abstract Corrosion pits on a steel plate can reduce the strength of the plate. However, it is difficult to calculate the corrosion effect analytically since the pits are normally distributed on the plate's surface randomly. In this manuscript, a simple approach is proposed to convert the corroded plate into a perfect one. By this method, the corrosion pits are treated as inclusions embedded in the plate. Then the analytical mechanics model used for composite material can be adopted in the calculation of the steel plate's effective material properties. To verify the proposed approach, numerical simulation is conducted using finite element method. More >

J. Sladek¹, V. Sladek¹, P. Stanak¹, Ch. Zhang²

CMC-Computers, Materials & Continua, Vol.15, No.1, pp. 1-26, 2010, DOI:10.3970/cmc.2010.015.001

Abstract A meshless local Petrov-Galerkin (MLPG) method is applied to solve laminate plate problems described by the Reissner-Mindlin theory. Both stationary and transient dynamic loads are analyzed here. The bending moment and the shear force expressions are obtained by integration through the laminated plate for the considered constitutive equations in each lamina. The Reissner-Mindlin theory reduces the original three-dimensional (3-D) thick plate problem to a two-dimensional (2-D) problem. Nodal points are randomly distributed over the mean surface of the considered plate. Each node is the center of a circle surrounding this node. The weak-form on small subdomains with a Heaviside step… More >