M. Y. Abdollahzadeh Jamalabadi^*

Frontiers in Heat and Mass Transfer, Vol.6, pp. 1-13, 2015, DOI:10.5098/hmt.6.7

Abstract An analytical study of entropy generation in steady boundary layer flow, heat and mass transfer characteristic of 2D convective flow of a micro polar fluid over a stretching sheet embedded through a highly absorbing medium is performed. The governing equations are continuity, momentum boundary layer, micro rotation, and energy takes into account of Rosseland approximation for thermal radiation sources are solved analytically. The governing system of partial differential equations is first transformed into a system of non-linear ordinary differential equations using similarity transformation. The transformed equations are non-linear coupled differential equations which are then linearized by quasi-linearization method and solved… More >

Nazia Afrin^a, Yijin Mao^a, Yuwen Zhang^a,*, J. K. Chen^a, Robin Ritter^b, Alan Lampson^b, Jonathan Stohs^c

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-8, 2016, DOI:10.5098/hmt.7.7

Abstract A three-dimensional numerical simulation is conducted for a complex process in a laser-material system, which involves heat and mass transfer in a compressible gaseous phase and chemical reaction during laser irradiation on a urethane paint coated on a stainless steel substrate. A finite volume method (FVM) with a co-located grid mesh that discretizes the entire computational domain is employed to simulate the heating process. The results show that when the top surface of the paint reaches a threshold temperature of 560 K, the polyurethane starts to decompose through chemical reaction. As a result, combustion products CO₂, H₂O and NO₂ are… More >

P.V. Satya Narayana^a,*, B.Venkateswarlu^b

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-10, 2016, DOI:10.5098/hmt.7.8

Abstract In this paper, we study the chemical reaction and heat source effects on unsteady MHD free convection heat and mass transfer of a nanofluid flow past a semi-infinite flat plate in a rotating system. The plate is assumed to oscillate in time with steady frequency so that the solutions of the boundary layer are the similar oscillatory type. The innovation of the present work is closed-form analytic solutions are obtained for the momentum, energy and concentration equations. The influence of various parameters entering into the problem in the nanofluid velocity, temperature and concentration distributions, as well as the skin friction… More >

Mekonnen Shiferaw Ayano^*, J. S. Mathunjwa

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-6, 2016, DOI:10.5098/hmt.7.9

Abstract This paper presents a study of the Magnetohydrodynamic flow of incompressible micropolar fluid past an infinite vertical porous plate with combined heat and mass transfer. The plate oscillate harmonically in its own plane and the temperature raised linearly with respect to time. Numerical calculations are carried out for different values of dimensionless parameters and an analysis of the results shown graphically and in table form. It is found that velocity and microrotation influenced appreciatively with parameters like radiation, magnetic, chemical reaction and coupling numbers. It is also noted that microrotation highly influenced by the magnetic parameters. The effects of some… More >

A. Vijayalakshmi, S. Srinivas^*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-11, 2016, DOI:10.5098/hmt.7.10

Abstract In the present study, the flow and heat transfer characteristics of a nanofluid in an expanding or contracting porous channel with different permeabilities in presence of thermal radiation are investigated. Analytical solutions for the flow variables are obtained by employing homotopy analysis method (HAM). Maxwell-Garnetts and Brinkman models are considered to calculate the thermal conductivity and the viscosity of nanofluid. In this investigation, we considered water and ethylene glycol as base fluids and silver ( Ag ), copper ( Cu ), titanium dioxide ( TiO₂ ) and alumina ( Al₂O₃ ) as nanoparticles. The effects of various emerging parameters on… More >

G. Nagaraju^a,† , Anjanna Matta^b, K. Kaladhar^c

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-5, 2016, DOI:10.5098/hmt.7.11

Abstract A theoretical steady of two-dimensional and MHD couple stress fluid flow over a linearly stretching sheet is investigated with the effects of thermal radiation, internal heat generation and homogeneous chemical reaction of first order. The governing equations of continuity, momentum, energy and diffusion for this boundary layer flow are transformed into one set of coupled non-linear ordinary differential equations using the local similarity transformation and are then solved using the fourth-order Runge-Kutta method along with the shooting technique. The effects of the couple stress parameter (S), Magnetic parameter (M) and chemical reaction parameter (Cr) are presented through the graphical illustrations.… More >

C. S. K. Raju^a , N. Sandeep^a, J. Prakash^b,1

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-8, 2016, DOI:10.5098/hmt.7.14

Abstract In this study, we analyzed the effects of nonlinear thermal radiation and induced magnetic field on steady two-dimensional incompressible flow of Jeffrey fluid flow past a stretching/shrinking surface in the presence of homogeneous-heterogeneous reactions. For physical relevance in this study we analyzed the behavior of homogeneous and heterogeneous profiles individually. The transformed governing equations with the help of similarity variables are solved numerically via Runge-Kutta and Newton’s method. We obtained better accuracy of the present results by differentiating with the existed published literature. The effect of pertinent parameters on velocity, induced magnetic field, temperature and concentration profiles along with the… More >

Vandana Bisht^*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-7, 2016, DOI:10.5098/hmt.7.19

Abstract In this paper the steady laminar magneto hydrodynamic (MHD) mixed convection boundary layer flow towards a vertical stretching sheet with variable fluid viscosity, radiation and in the presence of Dufour’s effect have been investigated. The governing partial differential equations are transformed into set of ordinary differential equations using similarity transformation, and then these equations have been solved numerically using Runge- Kutta method with shooting technique. Results shows that magnitude of skin friction coefficient decreases, while magnitude of heat transfer coefficient and mass transfer coefficient increases with decreasing values of viscosity variation parameter for the case of opposing flow. But in… More >

S. Harinath Reddy^a , M.C. Raju^a,*, E. Keshava Reddy^b

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-9, 2016, DOI:10.5098/hmt.7.21

Abstract This manuscript presents a detailed numerical study on the influence of radiation absorption and chemical reaction on unsteady magneto hydrodynamic free convective heat and mass transfer flow. A heat generating Casson fluid past an oscillating vertical plate embedded in a porous medium in the presence of constant wall temperature and concentration is considered. The non-dimensional governing equations along with the corresponding boundary conditions are solved using Finite difference method numerically. Effects of various emerging flow parameters on concentration, temperature and velocity distributions are presented graphically and analyzed. Expressions for skin-friction, Nusselt number and Sherwood number are also obtained. Effects of… More >

P. Chandra Reddy¹, M.C. Raju^1,*, G.S.S. Raju², S.V.K. Varma³

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-11, 2016, DOI:10.5098/hmt.7.28

Abstract The present analysis is focused on free convective heat and mass transfer characteristics of magneto-nanofluid flow through a moving vertical plate in the presence of thermal radiation and thermal diffusion. The water-based nanofluid containing copper is taken into consideration. A uniform magnetic field is applied perpendicular to the plate. The governing equations are solved by applying finite difference method. Numerical results of the fluid velocity, temperature, concentration, shear stress, rate of heat transfer and rate of mass transfer are presented graphically for different values of the physical parameters encountered in the problem. It is noticed that the fluid velocity increases… More >