Zhentao Chen¹, Weidong Lu^1,2,*, Yingwei Bao¹, Jun Zhang¹, Lu Wang¹, Kong Yue¹

Journal of Renewable Materials, Vol.10, No.1, pp. 89-104, 2022, DOI:10.32604/jrm.2021.015925

Abstract The timber-concrete composite (TCC) slabs have become a preferred choice of floor systems in modern multi story timber buildings. This TCC slab consisted of timber and a concrete slab which were commonly connected together with inclined self-tapping screws (STSs). To more accurately predict the fire performance of TCC slabs, the mechanical behavior of TCC connections under high temperature was investigated by numerical simulation in this study. The interface slip of TCC connections was simulated by a proposed Finite Element (FE) model at room temperature, and different diameter and penetration length screws were considered. The effectiveness of this FE model was… More > Graphic Abstract

HUAN YIN¹, LIZHEN WANG¹, YUBO FAN¹, BINGMEI M. FU^1,2,*

BIOCELL, Vol.45, No.5, pp. 1187-1199, 2021, DOI:10.32604/biocell.2021.016650

Abstract Primary cilium is an antenna-like and non-motile structure protruding from the apical surface of most mammalian cells including endothelial cells lining the inner side of all the blood vessels in our body. Although it has been over a century since primary cilia were discovered, the investigation about their mechano-sensing and other roles in maintaining normal functions of cardiovascular system has just started in recent years. This focused review aims to give an update about the current literature for the role of endothelial primary cilia in blood flow mechano-sensing and shear stress-shielding. To do this, we first summarized the characteristic features… More >

Qingzhuo Chi¹, Huimin Chen¹, Lizhong Mu^1,*, Ying He¹, Yong Luan²

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 721-743, 2021, DOI:10.32604/fdmp.2021.015200

Abstract Type A aortic dissection (AD) is one of the most serious cardiovascular diseases, whose risk predictors are controversial. The purpose of this research was to investigate how elongation accompanied by dilation of the ascending aorta (AAo) affects the relevant haemodynamic characteristics using image-based computational models. Five elongated AAos with different levels of dilation have been reconstructed based on the centerlines data of an elderly and an AD patient. Numerical simulations have been performed assuming an inflow waveform and a Windkessel model with three elements for all outflow boundaries. The numerical results have revealed that the elongation of AAo can disturb… More >

Yin Wang^1,*, Lingling Wang², Yong Ji¹, Zhicheng Xi¹, Wenwen Zhang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.2, pp. 471-485, 2021, DOI:10.32604/fdmp.2021.014652

Abstract A three dimensional (3D) numerical wave flume is used to investigate carefully the ISWs (Internal solitary wave) forces acting on cylinders interacting with a stratified shear environment. Using the Large-Eddy Simulation (LES) approach and analyzing the distribution of shear stress and pressure along the surface of the cylinder, the differential pressure resistance and the viscous force are obtained. The method of multiple linear regression analysis is adopted and a comprehensive influence coefficient is determined accordingly to account for the dimensionless forces acting on the cylinder. Results show that the differential pressure resistance on a square cylinder is 1.5 times higher… More >

Jihong Hu, Mingqing Sun^*, Wei Huang, Yingjun Wang

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 191-207, 2021, DOI:10.32604/cmes.2021.015365

Abstract Strain hardening cement-based composites (SHCC) beam externally bonded with glass fiber-reinforced polymer (FRP) plate was examined under three-point flexural test. The effects of the type of substrate used (plain cement mortar vs. SHCC), the use or not of a FRP plate to strengthen the SHCC beam, and the thickness of the FRP plate on the flexural performances were studied. Results show that the ultimate load of SHCC beams strengthened with FRP plate has improved greatly in comparison with plain SHCC beams. The deformation capacity of beams makes little change with an increase in the thickness of FRP plates. The formation… More >

Tantan Zhu¹, Da Huang^2,3,*, Jianxun Chen¹, Yanbin Luo¹, Longfei Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.127, No.1, pp. 79-97, 2021, DOI:10.32604/cmes.2021.014808

Abstract Excavation and earth surface processes (e.g., river incision) always induce the unloading of stress, which can cause the failure of rocks. To study the shear mechanical behavior of a rock sample under unloading normal stress conditions, a new stress path for direct shear tests was proposed to model the unloading of stress caused by excavation and other processes. The effects of the initial stresses (i.e., the normal stress and shear stress before unloading) on the shear behavior and energy conversion were investigated using laboratory tests and numerical simulations. The shear strength of a rock under constant stress or under unloading… More >

Peizhou Yan¹, Jiancheng Zou^2,*, Zhengzheng Li¹, Xin Yang³

Intelligent Automation & Soft Computing, Vol.28, No.1, pp. 213-225, 2021, DOI:10.32604/iasc.2021.016201

Abstract Within the application of driving assistance systems, the detection of driver’s facial features in the cab for a spectrum of luminosities is mission critical. One method that addresses this concern is infrared and visible image fusion. Its purpose is to generate an aggregate image which can granularly and systematically illustrate scene details in a range of lighting conditions. Our study introduces a novel approach to this method with marked improvements. We utilize non-subsampled shearlet transform (NSST) to obtain the low and high frequency sub-bands of infrared and visible imagery. For the low frequency sub-band fusion, we incorporate the local average… More >

Nguyễn T. Quyền^1,*, N. Dourado², A. J. P. Gomes^3,4, F. B. N. Ferreira¹

CMC-Computers, Materials & Continua, Vol.67, No.3, pp. 2765-2795, 2021, DOI:10.32604/cmc.2021.013164

Abstract The combination of a 4-node quadrilateral mixed interpolation of tensorial components element (MITC4) and the cell-based smoothed finite element method (CSFEM) was formulated and implemented in this work for the analysis of free vibration and unidirectional buckling of shell structures. This formulation was applied to numerous numerical examples of non-woven fabrics. As CSFEM schemes do not require coordinate transformation, spurious modes and numerical instabilities are prevented using bilinear quadrilateral element subdivided into two, three and four smoothing cells. An improvement of the original CSFEM formulation was made regarding the calculation of outward unit normal vectors, which allowed to remove the… More >

Yun Zhao, Shi Yan^*, Jiale Jia

CMES-Computer Modeling in Engineering & Sciences, Vol.126, No.3, pp. 1251-1274, 2021, DOI:10.32604/cmes.2021.013478

Abstract In this study, the pyramidal lattice stitched foam sandwich composite materials were manufactured by integrating top and bottom panels with pyramidal lattice core to overcome the weak interface between the core and the skins of the sandwich structure. The influence of the reinforcing core rods on the mechanical properties including compressive, shear, and three-point bending performances of the foam sandwich composite materials were revealed through theoretical analysis and comparative experiments. The theoretical predictions were consistent with the experimental results. Compressive test, shear test and three-point bending test were performed. The experimental results show that the core rods can significantly improve… More >

Mohamad Shukri Zakaria^1,*, Haslina Abdullah², Azmi Nordin¹, Syazwati Ahmad Zaki¹

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.1, pp. 171-179, 2021, DOI:10.32604/fdmp.2021.010974

Abstract This study deals with the interaction of blood flow with the wall aorta, i.e., the boundary of the main artery that transports blood in the human body. The problem is addressed in the framework of computational fluid dynamics complemented with (FSI), i.e., a fluid-structure interaction model. Two fundamental types of wall are considered, namely a flexible and a rigid boundary. The resulting hemodynamic flows are carefully compared in order to determine which boundary condition is more effective in reproducing reality. Special attention is paid to wall shear stress (WSS), a factor known for its ability to produce atherosclerosis and bulges.… More >