Nur Syahirah Wahid^1,*, Nor Ain Azeany Mohd Nasir^2,3, Norihan Md Arifin^1,3, Ioan Pop^4,5

CMES-Computer Modeling in Engineering & Sciences, Vol.142, No.2, pp. 1865-1881, 2025, DOI:10.32604/cmes.2024.059508 - 27 January 2025

Abstract Modeling the boundary layer flow of ternary hybrid nanofluids is important for understanding and optimizing their thermal performance, particularly in applications where enhanced heat transfer and fluid dynamics are essential. This study numerically investigates the boundary layer flow of alumina-copper-silver/water nanofluid over a permeable stretching/shrinking sheet, incorporating both first and second-order velocity slip. The mathematical model is solved in MATLAB facilitated by the bvp4c function that employs the finite difference scheme and Lobatto IIIa formula. The solver successfully generates dual solutions for the model, and further analysis is conducted to assess their stability. The findings More >

Parakapali Roja¹, Shaik Mohammed Ibrahim², Thummala Sankar Reddy³, Giulio Lorenzini^4,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.2, pp. 257-274, 2024, DOI:10.32604/fdmp.2023.042283 - 14 December 2023

Abstract This study examines the behavior of a micropolar nanofluid flowing over a sheet in the presence of a transverse magnetic field and thermal effects. In addition, chemical (first-order homogeneous) reactions are taken into account. A similarity transformation is used to reduce the system of governing coupled non-linear partial differential equations (PDEs), which account for the transport of mass, momentum, angular momentum, energy and species, to a set of non-linear ordinary differential equations (ODEs). The Runge-Kutta method along with shooting method is used to solve them. The impact of several parameters is evaluated. It is shown More >

U. S. Mahabaleshwar¹, T. Anusha^1,*, M. EL Ganaoui², R. Bennacer³

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.4, pp. 929-939, 2023, DOI:10.32604/fdmp.2022.021996 - 02 November 2022

Abstract The impacts of radiation, mass transpiration, and volume fraction of carbon nanotubes on the flow of a Newtonian fluid past a porous stretching/shrinking sheet are investigated. For this purpose, three types of base liquids are considered, namely, water, ethylene glycol and engine oil. Moreover, single and multi-wall carbon nanotubes are examined in the analysis. The overall physical problem is modeled using a system of highly nonlinear partial differential equations, which are then converted into highly nonlinear third order ordinary differential equations via a suitable similarity transformation. These equations are solved analytically along with the corresponding More > Graphic Abstract

Muhammad A. Sadiq^1,2,*, Nadeem Abbas³, Haitham M. S. Bahaidarah⁴, Mohammad Amjad⁵

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.2, pp. 471-486, 2023, DOI:10.32604/fdmp.2022.021133 - 29 August 2022

Abstract We present the results of an investigation into the behavior of the unsteady flow of a Casson Micropolar nanofluid over a shrinking/stretching curved surface, together with a heat transfer analysis of the same problem. The body force acting perpendicular to the surface wall is in charge of regulating the fluid flow rate. Curvilinear coordinates are used to account for the considered curved geometry and a set of balance equations for mass, momentum, energy and concentration is obtained accordingly. These are turned into ordinary differential equations using a similarity transformation. We show that these equations have More >

A. B. Vishalakshi¹, U. S. Mahabaleshwar^1,*, M. EL. Ganaoui², R. Bennacer³

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.5, pp. 1551-1567, 2022, DOI:10.32604/fdmp.2022.021949 - 27 May 2022

Abstract This paper is devoted to the analysis of the heat transfer and Navier’s slip effects in a non-Newtonian Jeffrey fluid flowing past a stretching/shrinking sheet. The nanoparticles, namely, Cu and Al₂O₃ are used with a water-based fluid with Prandtl number 6.272. Velocity slip flow is assumed to occur when the characteristic size of the flow system is small or the flow pressure is very small. By using the similarity transformations, the governing nonlinear PDEs are turned into ordinary differential equations (ODE’s). Analytical results are presented and analyzed for various values of physical parameters: Prandtl number, Radiation… More >

Izyan Syazana Awaludin^{1, 2}, Anuar Ishak^2,*, Ioan Pop³

CMES-Computer Modeling in Engineering & Sciences, Vol.120, No.1, pp. 203-214, 2019, DOI:10.32604/cmes.2019.06594

Abstract The present study considers the magnetohydrodynamic (MHD) stagnation point flow with chemical reaction effect over a permeable stretching/shrinking sheet. The partial differential equations are reduced to a set of ordinary differential equations using a similarity transformation. The transformed equations are then solved numerically by employing the bvp4c function available in the MATLAB software. The numerical results illustrate the effects of several parameters on the skin friction coefficient, local Nusselt number and the local Sherwood number. Dual solutions are obtained for a certain range of parameters. The temporal stability analysis is carried out to determine which More >

P. Bala Anki Reddy^a,*, S. Suneetha^b

Frontiers in Heat and Mass Transfer, Vol.8, pp. 1-11, 2017, DOI:10.5098/hmt.8.24

Abstract We report on a mathematical model for analyzing the effects of homogeneous-heterogeneous chemical reaction and slip velocity on the MHD stagnation point flow of electrically conducting micropolar fluid over a stretching/shrinking surface embedded in a porous medium. The governing boundary layer coupled partial differential equations are transformed into a system of non-linear ordinary differential equations, which are solved numerically using the MATLAB bvp4c solver. The effects of physical and fluid parameters such as the stretching parameter, micropolar parameter, permeability parameter, strength of homogeneous and heterogeneous reaction parameter on the velocity and concentration are analyzed, and More >

C. S. K. Raju^a , N. Sandeep^a, J. Prakash^b,1

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-8, 2016, DOI:10.5098/hmt.7.14

Abstract In this study, we analyzed the effects of nonlinear thermal radiation and induced magnetic field on steady two-dimensional incompressible flow of Jeffrey fluid flow past a stretching/shrinking surface in the presence of homogeneous-heterogeneous reactions. For physical relevance in this study we analyzed the behavior of homogeneous and heterogeneous profiles individually. The transformed governing equations with the help of similarity variables are solved numerically via Runge-Kutta and Newton’s method. We obtained better accuracy of the present results by differentiating with the existed published literature. The effect of pertinent parameters on velocity, induced magnetic field, temperature and More >