Óscar Mogollón-Gutiérrez^*, José Carlos Sancho Núñez, Mar Ávila Vegas, Andrés Caro Lindo

Intelligent Automation & Soft Computing, Vol.37, No.2, pp. 1691-1709, 2023, DOI:10.32604/iasc.2023.039255

Abstract Nowadays, IT systems rely mainly on artificial intelligence (AI) algorithms to process data. AI is generally used to extract knowledge from stored information and, depending on the nature of data, it may be necessary to apply different AI algorithms. In this article, a novel perspective on the use of AI to ensure the cybersecurity through the study of network traffic is presented. This is done through the construction of a two-stage cyberattack classification ensemble model addressing class imbalance following a one-vs-rest (OvR) approach. With the growing trend of cyberattacks, it is essential to implement techniques that ensure legitimate access to… More >

Qingxin Ba^a , Scott Egbert^b, Xuefang Li^a,* , Lin Cheng^a,**

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-9, 2019, DOI:10.5098/hmt.12.20

Abstract Precalciner performance is crucial to the production rate and lifespan of cement kiln systems. The gas-solid flow and pulverized coal combustion processes in an industrial precalciner were numerically modeled to understand the flow patterns and thermal processes in the system. The gas and meal flow rates and properties were measured on-site to determine the boundary conditions for the simulations and to validate the models. The upward swirl of the gas flow in the furnace helped disperse the particles and extend their duration in the precalciner. The O₂ and CO₂ concentration distributions indicated that the coal particles were well dispersed and… More >

Riyadh S. Al-Turaihi ^a , Doaa Fadhil^a,b,*, Azher M. Abed^b

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-7, 2019, DOI:10.5098/hmt.13.29

Abstract In this paper an experimental and numerical analysis has been conducted to study the effect of heat transfer and filed flow of two-phase flow (water and air) through a rectangular ribbed channel. The study has involved the several values of heat flux (120,140,160 Watts), air and water superficial velocity (1.096, 1.425, 1.644, 1.864, and 2.193 m/s) and (0.0421, 0.0842, and 0.1474 m/s), respectively. The distribution of temperature along the channel was photographed using thermal camera and compared with numerical results . The experimental test system was fabricated of vertical rectangular channel with cross section of (0.08m × 0.03m) and a… More >

Masataka Mochizuki^a,*,†, Thang Nguyen^b

Frontiers in Heat and Mass Transfer, Vol.13, pp. 1-6, 2019, DOI:10.5098/hmt.13.12

Abstract The cooling device for computers and electronics is getting smaller and thinner year after year, especially for the mobile handheld device such as smartphone which is the most popular gadget and widely use nowadays. It seems that in the current trend every 6-12 months a new model of smartphone is introduced and it was packed with faster processing processor, memories, and graphics, higher density battery, higher resolution for camera and video and so on. The drawback is the device getting hotter due to the increase of heat dissipation caused by faster computing. The traditional method of cooling by purely metal… More >

Yu Chen^a , Shen Du^a, Dong Li^a, Yang Gao^b, Ya-Ling He^a,*

Frontiers in Heat and Mass Transfer, Vol.15, pp. 1-13, 2020, DOI:10.5098/hmt.15.19

Abstract Non-uniform heating and vapor blockage deteriorate the effectiveness of transpiration cooling, and an optimization method by using porous media with a gradually-changed structure is proposed. The numerical tool based on a two-phase mixture model and local thermal non-equilibrium assumption considering variable properties of coolant is applied. Porous media with linearly-changed porosity or particle diameter is analyzed. The transient results presented that the structure of gradually-changed porosity (or particle diameter) with appropriate parameters can delay the heat transfer deterioration. And it is confirmed that the present theoretical model is an effective tool for optimization design of transpiration cooling system. More >

Louay Abd Al-Azez Mahdi, Mohammed A. Fayad, Miqdam T. Chaichan^*

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2201-2214, 2023, DOI:10.32604/fdmp.2023.027166

Abstract A theoretical study based on the Penalty factor (PF) method by Cavallini et al. is conducted to show that the pressure drop occurring in a wire-on-tube heat exchanger can be converted into a temperature difference for two types of refrigerants R-134a and R-600a typically used for charging refrigerators and freezers. The following conditions are considered: stratified or stratified-wavy flow condensation occurring inside the smooth tube of a wire-on-tube condenser with diameter 3.25, 4.83, and 6.299 mm, condensation temperatures 35°C, 45°C, and 54.4°C and cover refrigerant mass flow rate spanning the interval from 1 to 7 kg/hr. The results show that the… More > Graphic Abstract

Rongge Xiao^a,*, Dong Wang^a, Shuaishuai Jin^a, Hongping Yu^b, Bo Liu^a

Frontiers in Heat and Mass Transfer, Vol.16, pp. 1-9, 2021, DOI:10.5098/hmt.16.11

Abstract Based on the Viscous Kelvin-Helmholtz theory used by D. Barnea & Y. Taitel (1993), a two-fluid stratified flow model of gas-liquid two-phase flow is established. Using the mathematical derivation, the influence of various influence factors on the stability of liquid level structure is synthesized. Compared with the criteria of D Barnea & Y. Taitel (1993) and Taitel & Dukler(1976) , and the algorithm of flow pattern transition criterion of stratified flow is proposed. According to the data of multiphase flow experimental loop, the influence of liquid viscosity and the instantaneous volume flow rate change of gas-liquid two-phase on the transition… More >

Ammar Hassan Soheel, Omar Mahmood Jumaah, Ahmed Mustaffa Saleem^*

Frontiers in Heat and Mass Transfer, Vol.17, pp. 1-7, 2021, DOI:10.5098/hmt.17.21

Abstract This paper presents a simulation and investigation of the heat transfer coefficient, pressure drop, and thermal conductivity of two - phase flow. The simulation was performed of mixtures (Al₂O₃ nanoparticles with R134a refrigerant). The size of nanoparticles (Al₂O₃) which is used in this study is 30 nm and volume concentrations are 0.015 and 0.03. The two – phase flowing through a horizontal circular microchannel of (diameter 100 µm, and length 20 mm) under constant heat flux (3000 W/m²) and constant wall temperature (330 K), also in this study used the inlet temperature at -20 oC and mass flow rates are… More >

Namphon Pipatpaiboon^a , Teerapat Chompookham^b, Sampan Rittidech^b, Yulong Ding^c, Thanya Parametthanuwat^d, Surachet Sichamnan^a,*

Frontiers in Heat and Mass Transfer, Vol.19, pp. 1-9, 2022, DOI:10.5098/hmt.19.24

Abstract When nanofluid (NF) is used as the working fluid in a rectangular two-phase closed thermosyphon (RTPCT), the formations and heat performance of two-phase flow patterns are explored qualitatively. Silver nanoparticles were mixed with deionized water at a concentration of 0.5 wt% in the NF. Nanoparticles improved the thermal contact surface area within the base flow, allowing the base fluid to boil quickly and easily. When the working fluid was boiled, NF also demonstrated high thermal conductivity capabilities, which diffused and moved along with the dual flow patterns. As a result, these qualities improved the RTPCT's efficiency. Considering the findings of… More >

Mingjing Lu^1,2,*, Zenglin Wang^1,3, Aishan Li¹, Liaoyuan Zhang¹, Bintao Zheng¹, Zilin Zhang¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.5, pp. 1269-1281, 2023, DOI:10.32604/fdmp.2023.023188

Abstract A mathematical model for the gas-water two-phase flow in tight gas reservoirs is elaborated. The model can account for the gas slip effect, stress sensitivity, and high-speed non-Darcy factors. The related equations are solved in the framework of a finite element method. The results are validated against those obtained by using the commercial software CMG (Computer Modeling Group software for advanced recovery process simulation). It is shown that the proposed method is reliable. It can capture the fracture rejection characteristics of tight gas reservoirs better than the CMG. A sensitivity analysis of various control factors (initial water saturation, reservoir parameters,… More >