Yasmine I. Abdelhak^1,2, Fady Kamel³, Moustafa Hafez², Hussein E. Kotb^4,5, Haitham A. Omran⁵, Tawfik Ismail^6,7,*, Hassan Mostafa^2,3

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3685-3702, 2022, DOI:10.32604/cmc.2022.022470

Abstract This paper presents a radio optical network simulation tool (RONST) for modeling optical-wireless systems. For a typical optical and electrical chain environment, performance should be optimized concurrently before system implementation. As a result, simulating such systems turns out to be a multidisciplinary problem. The governing equations are incompatible with co-simulation in the traditional environments of existing software (SW) packages. The ultra-wideband (UWB) technology is an ideal candidate for providing high-speed short-range access for wireless services. The limited wireless reach of this technology is a significant limitation. A feasible solution to the problem of extending UWB signals is to transmit these… More >

Hend Ibrahim¹, Abeer D. Algarni^2,*, Mahmoud Abdalla¹, Walid El-Shafai^3,4, Fathi E. Abd El-Samie^2,3, Naglaa F. Soliman^1,2

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3293-3318, 2022, DOI:10.32604/cmc.2022.022436

Abstract Optical Wireless Communication (OWC) is a new trend in communication systems to achieve large bandwidth, high bit rate, high security, fast deployment, and low cost. The basic idea of the OWC is to transmit data on unguided media with light. This system requires multi-carrier modulation such as Orthogonal Frequency Division Multiplexing (OFDM). This paper studies optical OFDM performance based on Intensity Modulation with Direct Detection (IM/DD) system. This system requires a non-negativity constraint. The paper presents a framework for wireless optical OFDM system that comprises (IM/DD) with different forms, Direct Current biased Optical OFDM (DCO-OFDM), Asymmetrically Clipped Optical OFDM (ACO-OFDM),… More >

Simon Crase^1,2, Benjamin Hall², Suresh N. Thennadil^3,*

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 2435-2458, 2022, DOI:10.32604/cmc.2022.022414

Abstract Cluster analysis in spectroscopy presents some unique challenges due to the specific data characteristics in spectroscopy, namely, high dimensionality and small sample size. In order to improve cluster analysis outcomes, feature selection can be used to remove redundant or irrelevant features and reduce the dimensionality. However, for cluster analysis, this must be done in an unsupervised manner without the benefit of data labels. This paper presents a novel feature selection approach for cluster analysis, utilizing clusterability metrics to remove features that least contribute to a dataset's tendency to cluster. Two versions are presented and evaluated: The Hopkins clusterability filter which… More >

Abhishek Kumar Shukla^*, Sujoy Das

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3557-3570, 2022, DOI:10.32604/cmc.2022.022411

Abstract The neural network has attracted researchers immensely in the last couple of years due to its wide applications in various areas such as Data mining, Natural language processing, Image processing, and Information retrieval etc. Word embedding has been applied by many researchers for Information retrieval tasks. In this paper word embedding-based skip-gram model has been developed for the query expansion task. Vocabulary terms are obtained from the top “k” initially retrieved documents using the Pseudo relevance feedback model and then they are trained using the skip-gram model to find the expansion terms for the user query. The performance of the… More >

Sayed Mahmoud^*, Alaa Salman

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 2159-2173, 2022, DOI:10.32604/cmc.2022.022357

Abstract Reinforced concrete (RC) as a material is most commonly used for buildings construction. Several floor systems are available following the structural and architectural requirements. The current research study provides cost and input energy comparisons of RC office buildings of different floor systems. Conventional solid, ribbed, flat plate and flat slab systems are considered in the study. Building models in three-dimensional using extended three-dimensional analysis of building systems (ETABS) and in two-dimensional using slab analysis by the finite element (SAFE) are developed for analysis purposes. Analysis and design using both software packages and manual calculations are employed to obtain the optimum… More >

Mohammed H. Alsharif¹, Raju Kannadasan², Amir Y. Hassan³, Wael Z. Tawfik⁴, Mun-Kyeom Kim^5,*, Muhammad Asghar Khan⁶, Ahmad A. A. Solyman⁷

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3243-3255, 2022, DOI:10.32604/cmc.2022.022348

Abstract Cellular mobile technology has witnessed tremendous growth in recent times. One of the challenges facing the operators to extend the coverage of the networks to meet the rising demand for cellular mobile services is the power sources used to supply cellular towers with energy, especially in remote. Thus, switch from the conventional sources of energy to a greener and sustainable power model became a target of the academic and industrial sectors in many fields; one of these important fields is the telecommunication sector. Accordingly, this study aims to find the optimum sizing and techno-economic investigation of a solar photovoltaic scheme… More >

Mesfer AI Duhayyim¹, Fahd N. Al-Wesabi², Radwa Marzouk³, Abdalla Ibrahim Abdalla Musa⁴, Noha Negm⁵, Anwer Mustafa Hilal⁶, Manar Ahmed Hamza^6,*, Mohammed Rizwanullah⁶

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 4135-4149, 2022, DOI:10.32604/cmc.2022.022336

Abstract Internet of Medical Things (IoMT) is a breakthrough technology in the transfer of medical data via a communication system. Wearable sensor devices collect patient data and transfer them through mobile internet, that is, the IoMT. Recently, the shift in paradigm from manual data storage to electronic health recording on fog, edge, and cloud computing has been noted. These advanced computing technologies have facilitated medical services with minimum cost and available conditions. However, the IoMT raises a high concern on network security and patient data privacy in the health care system. The main issue is the transmission of health data with… More >

Xian Wu¹, Wei Song^1,2,3,*, Xukun Zhang¹, Ganghua Lin^2,4, Haimin Wang^5,6,7, Yuanyong Deng^2,4

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3497-3512, 2022, DOI:10.32604/cmc.2022.022325

Abstract Sky clouds affect solar observations significantly. Their shadows obscure the details of solar features in observed images. Cloud-covered solar images are difficult to be used for further research without pre-processing. In this paper, the solar image cloud removing problem is converted to an image-to-image translation problem, with a used algorithm of the Pixel to Pixel Network (Pix2Pix), which generates a cloudless solar image without relying on the physical scattering model. Pix2Pix is consists of a generator and a discriminator. The generator is a well-designed U-Net. The discriminator uses PatchGAN structure to improve the details of the generated solar image, which… More >

Xiaorui Zhang^1,2,*, Xun Sun¹, Xingming Sun¹, Wei Sun³, Sunil Kumar Jha⁴

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3035-3050, 2022, DOI:10.32604/cmc.2022.022304

Abstract The leakage of medical audio data in telemedicine seriously violates the privacy of patients. In order to avoid the leakage of patient information in telemedicine, a two-stage reversible robust audio watermarking algorithm is proposed to protect medical audio data. The scheme decomposes the medical audio into two independent embedding domains, embeds the robust watermark and the reversible watermark into the two domains respectively. In order to ensure the audio quality, the Hurst exponent is used to find a suitable position for watermark embedding. Due to the independence of the two embedding domains, the embedding of the second-stage reversible watermark will… More >

Anwer Mustafa Hil¹, Fahd N. Al-Wesabi², Hadeel Alsolai³, Ola Abdelgney Omer Ali⁴, Nadhem Nemri⁵, Manar Ahmed Hamza^1,*, Abu Sarwar Zamani¹, Mohammed Rizwanullah¹

CMC-Computers, Materials & Continua, Vol.71, No.2, pp. 3921-3936, 2022, DOI:10.32604/cmc.2022.022301

Abstract Social media is a platform in which user can create, share and exchange the knowledge/information. Social media marketing is to identify the different consumer's demands and engages them to create marketing resources. The popular social media platforms are Microsoft, Snapchat, Amazon, Flipkart, Google, eBay, Instagram, Facebook, Pin interest, and Twitter. The main aim of social media marketing deals with various business partners and build good relationship with millions of customers by satisfying their needs. Disruptive technology is replacing old approaches in the social media marketing to new technology-based marketing. However, this disruptive technology creates some issues like fake news, insecure,… More >