M.K. Achour¹, S. Kaddeche², A. Gharbi², H. Ben Hadid³, D. Henry³

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.4, pp. 277-284, 2005, DOI:10.3970/fdmp.2005.001.277

Abstract The effects of an acoustic wave on the instabilities occurring in a lateral differentially heated cavity are investigated numerically. Linear stability results show that the acoustic wave affects significantly the instability characteristics of such a Hadley flow. Indeed, the sound field is found to stabilize both two dimensional transverse stationary and three dimensional longitudinal oscillatory instabilities which are the most critical modes affecting the buoyant convection in the fluid layer. Nevertheless, when stabilized by an acoustic wave, the 2D modes turn from stationary to oscillatory, with the known consequences of such a change on mass and heat transfer, especially in… More >

K. Sefiane¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 267-276, 2005, DOI:10.3970/fdmp.2005.001.267

Abstract In this paper the experimental results on the wetting behaviour of volatile binary sessile drops are reported. The evaporation rate is varied through the control of the ambient total pressure. The dynamic wetting contact angle of an evaporating Water-Ethanol drop is investigated at various sub-atmospheric pressures. The wetting properties (contact angle, shape and volume) are monitored in time using a drop shape analysis instrument. The results show that the evaporation of the binary droplet takes place in two stages: the first stage where the wetting behaviour is very similar to the pure ethanol case and a second stage where the… More >

C. Giessler¹, C. Sievert², U. Krieger¹, B. Halbedel¹, D. Huelsenberg¹, U. Luedke², A. Thess^1,2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 247-266, 2005, DOI:10.3970/fdmp.2005.001.247

Abstract Buoyancy driven motion of a highly viscous electrically conducting fluid under the influence of Lorentz forces is investigated theoretically and experimentally. This problem is relevant to the processing of glass, where it is of considerable interest to know whether electromagnetic forces can effectively improve mixing and help to avoid undesired flow patterns in glass melting furnaces. Two highly simplified models are proposed in which the fluid is assumed to be confined in a circular loop containing several localized resistive heating, convective cooling, and electromagnetic forcing elements. The first model is used to derive the scaling laws of the mean velocity… More >

P. Yu¹, T. S. Lee¹, Y. Zeng¹, H. T. Low²

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 235-246, 2005, DOI:10.3970/fdmp.2005.001.235

Abstract A numerical model is developed for the investigation of flow field and mass transport in a micro-bioreactor, of working volume below 5 ml, in which medium mixing is generated by a magnetic stirrer-rod rotating on the bottom. The flow-field results show that a recirculation region exists above the stirrer rod and rotates with it; the related fluid mixing is characterized by a circulation coefficient of up to 0.2 which is about five times smaller than that of a one-litre stirred-tank bioreactor. The oxygen transfer coefficient is less than 5 h^-1 which is two orders smaller than that of a 10-litre… More >

Marcello Lappa¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 213-234, 2005, DOI:10.3970/fdmp.2005.001.213

Abstract The physical properties of many emulsions and metal alloys strongly depend on the multiphase morphology which is controlled to a great degree by particle-particle interaction during the related processing. In the present article significant effort is devoted to illustrate the philosophy of modeling for these phenomena and some insights into the physics. Within such a context working numerical techniques that have enjoyed a widespread use over recent years are presented and/or reviewed. Finally a focused and critical comparison of these possible approaches is reported illustrating advantages and disadvantages, strengths and weaknesses, past history and future directions. More >

Marcello Lappa¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.3, pp. 201-212, 2005, DOI:10.3970/fdmp.2005.001.201

Abstract The manuscript deals with a presentation of the most reliable theories introduced over the years to model particle coalescence and non-coalescence phenomena at both macroscopic and microscopic length scales (including historical developments and very recent contributions) and moves through other macrophysical mechanisms that can cause spatial separation of the fluid phases (liquid-liquid or liquid-gas) in multi-material problems, while providing a rigorous theoretical framework for deeper understanding of how drop (or bubble) migration due to gravity and/or Marangoni effects can interact cooperatively with coalescence to significantly affect the multiphase pattern formation, its evolutionary progress as well as the final quality of… More >

D. E. Melnikov¹, V. M. Shevtsova²

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 189-200, 2005, DOI:10.3970/fdmp.2005.001.189

Abstract Buoyancy-driven convective flows are numerically analyzed in a cubic enclosure, containing a liquid subjected to a temperature difference between opposite lateral walls; all other walls are thermally insulated. The stationary gravity vector is perpendicular to the applied temperature gradient. The steady flow patterns are investigated within the framework of a liquid particles tracing technique. Three tracing techniques are compared: the first, based on a trilinear interpolation of the liquid velocity defined on the computational grid and an eighth order in time Runge-Kutta method; the second and the third, using a resampling the velocity field on a new approximately twice finer… More >

Marcello Lappa¹

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 171-188, 2005, DOI:10.3970/fdmp.2005.001.171

Abstract The paper presents a comparative and critical analysis of some theoretical/experimental/numerical arguments concerning the possible stabilization of the surface-tension-driven (Marangoni) flow in the Floating Zone technique and in various related fluid-dynamic models. It is conceived as a natural extension of the focused overview published in Cryst. Res. Tech. 40(6), 531, (2005) where much room was devoted to discuss the intrinsic physical mechanisms responsible for three-dimensional and oscillatory flows in a variety of technological processes. Here, a significant effort is provided to illustrate the genesis of possible control strategies (many of which are still in a very embryonic condition), the underlying… More >

N.I. Wakayama¹, D.C. Yin², J.W. Qi³

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 153-170, 2005, DOI:10.3970/fdmp.2005.001.153

Abstract The production of crystals of adequate size and high quality is the "bottleneck'' for three-dimensional structure analysis of protein crystals. In this work, in order to shed additional light on the (still controversial) beneficial effect of microgravity on crystal growth, we focus on recent advanced experimental and theoretical research about the effects of buoyancy-driven convection on protein crystallization. In the light of the numerical studies the following major outcomes can be highlighted: (1) when the crystal size exceeds several dozens of µm, buoyancy-driven convection dominates solute transport near the growing crystal and the crystal growth rate becomes larger than that… More >

O.M. Lavrenteva¹, D. Tsemakh, A. Nir

FDMP-Fluid Dynamics & Materials Processing, Vol.1, No.2, pp. 131-152, 2005, DOI:10.3970/fdmp.2005.001.131

Abstract We have studied the motion of a drop, induced by the internal secretion of a surface-active substance, in the vicinity of solid walls or non-deformable liquid-liquid interface under micro-gravity conditions. The secreted substance renders a non-uniform distribution of surfactant along the outer surface that, in turn, results in interfacial stress variation that ultimately leads to a surface motion and to locomotion of the drop. Cases of plane and spherical boundaries have been considered as well as cases of linear and non-linear dependence of the interfacial tension on concentration of surfactant. The dependence of the drop migration velocity on the location… More >