Jiaxiang Luo^1,2, Yu Li², Weien Zhou², Zhiqiang Gong², Zeyu Zhang¹, Wen Yao^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 823-848, 2021, DOI:10.32604/cmes.2021.016737 - 11 August 2021

Abstract Deep learning for topology optimization has been extensively studied to reduce the cost of calculation in recent years. However, the loss function of the above method is mainly based on pixel-wise errors from the image perspective, which cannot embed the physical knowledge of topology optimization. Therefore, this paper presents an improved deep learning model to alleviate the above difficulty effectively. The feature pyramid network (FPN), a kind of deep learning model, is trained to learn the inherent physical law of topology optimization itself, of which the loss function is composed of pixel-wise errors and physical More >

Jianchen Wu¹, Yujie Guo^1,*, Fangli Wang^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1007-1031, 2021, DOI:10.32604/cmes.2021.016475 - 11 August 2021

Abstract Spacecraft flexible appendages may experience thermally induced vibrations (TIV) under sudden heating loads, which in consequence will be unable to complete their intended missions. Isogeometric analysis (IGA) utilizes, in an isoparametric concept, the same high order and high continuity non-uniform rational B-splines (NURBS) to represent both the geometry and the physical field of the structure. Compared to the traditional Lagrange polynomial based finite element method where only C0-continuity across elements can be achieved, IGA is geometrically exact and naturally fulfills the C1-continuity requirement of Euler–Bernoulli (EB) beam elements, therefore, does not need extra rotational degrees-of-freedom.… More >

Haishan Lu, Shuguang Gong^*, Jianping Zhang, Guilan Xie, Shuohui Yin

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1151-1178, 2021, DOI:10.32604/cmes.2021.016165 - 11 August 2021

Abstract We proposed an improved graphics processing unit (GPU) acceleration approach for three-dimensional structural topology optimization using the element-free Galerkin (EFG) method. This method can effectively eliminate the race condition under parallelization. We established a structural topology optimization model by combining the EFG method and the solid isotropic microstructures with penalization model. We explored the GPU parallel algorithm of assembling stiffness matrix, solving discrete equation, analyzing sensitivity, and updating design variables in detail. We also proposed a node pair-wise method for assembling the stiffness matrix and a node-wise method for sensitivity analysis to eliminate race conditions More >

Ke Song^1,*, Paul Liu², Dongquan Liu³

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1133-1150, 2021, DOI:10.32604/cmes.2021.016008 - 11 August 2021

Abstract A novel beamforming algorithm named Delay Multiply and Sum (DMAS), which excels at enhancing the resolution and contrast of ultrasonic image, has recently been proposed. However, there are nested loops in this algorithm, so the calculation complexity is higher compared to the Delay and Sum (DAS) beamformer which is widely used in industry. Thus, we proposed a simple vector-based method to lower its complexity. The key point is to transform the nested loops into several vector operations, which can be efficiently implemented on many parallel platforms, such as Graphics Processing Units (GPUs), and multi-core Central… More >

Abidhan Bardhan¹, Priyadip Manna¹, Vinay Kumar¹, Avijit Burman¹, Bojan Žlender², Pijush Samui^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1033-1067, 2021, DOI:10.32604/cmes.2021.015885 - 11 August 2021

Abstract In many civil engineering projects, Piled Raft Foundations (PRFs) are usually preferred where the incoming load from the superstructures is very high. In geotechnical engineering practice, the settlement of soil layers is a critical issue for the serviceability of the structures. Thus, assessment of risk associated with the structures corresponding to the maximum allowable settlement of soils needs to be carried out in the design phase. In this study, reliability analysis of PRF based on settlement criteria is performed using a high-performance hybrid soft computing model. The new approach is an integration of the artificial… More >

Ying Wang^*, Haoran Shi, Shibo Ren

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 967-983, 2021, DOI:10.32604/cmes.2021.015792 - 11 August 2021

Abstract The corrosion of reinforcement in the concrete will cause the effective cross-sectional area of reinforcement to be weakened and the performance of reinforcement to change and lead to the degradation of the bond behavior between reinforcement and concrete, which can seriously affect the mechanical properties of the structural elements. Therefore, it is of great practical significance to accurately simulate the corrosion morphology and the corrosion products of reinforcement. This paper improves the previous cellular automata models and establishes a new cellular automata model framework for simulating the random pitting corrosion process of reinforcement in concrete.… More >

Rina Okuyama¹, Naoto Mitsume², Hideki Fujii¹, Hideaki Uchida^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 949-965, 2021, DOI:10.32604/cmes.2021.015773 - 11 August 2021

Abstract As the number of automobiles continues to increase year after year, the associated problem of traffic congestion has become a serious societal issue. Initiatives to mitigate this problem have considered methods for optimizing traffic volumes in wide-area road networks, and traffic-flow simulation has become a focus of interest as a technique for advance characterization of such strategies. Classes of models commonly used for traffic-flow simulations include microscopic models based on discrete vehicle representations, macroscopic models that describe entire traffic-flow systems in terms of average vehicle densities and velocities, and mesoscopic models and hybrid (or multiscale)… More >

Ming-Chih Chen, Yin-Ting Cheng^*, Ru-Wei Chen

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1103-1119, 2021, DOI:10.32604/cmes.2021.015589 - 11 August 2021

Abstract This work presents a fall detection system based on artificial intelligence. The system incorporates miniature wearable devices for fall detection. Fall detection is achieved by integrating a three-axis gyroscope and a three-axis accelerometer. The system gathers the differential data collected by the gyroscope and accelerometer, applies artificial intelligence algorithms for model training and constructs an effective model for fall detection. To provide easy wearing and effective position detection, it is designed as a small device attached to the user’s waist. Experiment results have shown that the accuracy of the proposed fall detection model is up More >

Ravi Shanker Dubey¹, Dumitru Baleanu^2,3, Manvendra Narayan Mishra^1,*, Pranay Goswami⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 1247-1263, 2021, DOI:10.32604/cmes.2021.015224 - 11 August 2021

Abstract Diabetes is a burning issue in the whole world. It is the imbalance between body glucose and insulin. The study of this imbalance is very much needed from a research point of view. For this reason, Bergman gave an important model named-Bergman minimal model. In the present work, using Caputo-Fabrizio (CF) fractional derivative, we generalize Bergman’s minimal blood glucose-insulin model. Further, we modify the old model by including one more component known as diet D(t), which is also essential for the blood glucose model. We solve the modified model with the help of Sumudu transform and More >

Sultan Alamri^1,*, Kartini Nurfalah², Kiki Adhinugraha³

CMES-Computer Modeling in Engineering & Sciences, Vol.128, No.3, pp. 927-948, 2021, DOI:10.32604/cmes.2021.014852 - 11 August 2021

Abstract An indoor trajectory is the path of an object moving through corridors and stairs inside a building. There are various types of technologies that can be used to reconstruct the path of a moving object and detect its position. GPS has been used for reconstruction in outdoor environments, but for indoor environments, mobile devices with embedded sensors are used. An accelerometer sensor and a magnetometer sensor are used to detect human movement and reconstruct the trajectory on a single floor. In an indoor environment, there are many activities that will create the trajectory similar to… More >