Ali Jenabidehkordi^1,2, Timon Rabczuk^1,2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 493-500, 2019, DOI:10.32604/cmes.2019.07942

Abstract We present a novel refinement approach in peridynamics (PD). The proposed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. We will show that no ghost forces are needed when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamics and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. More >

Ying Song^1,2, Jiale Yan^1,2, Shaofan Li^2,*, Zhuang Kang¹

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 465-492, 2019, DOI:10.32604/cmes.2019.07190

Abstract In the present work, a state-based peridynamics with adaptive particle refinement is proposed to simulate water ice crater formation due to impact loads. A modified Drucker-Prager constitutive model was adopted to model ice and was implemented in the state-based peridynamic equations to analyze the elastic-plastic deformation of ice. In simulations, we use the fracture toughness failure criterion in peridynamics to simulate the quasi-brittle failure of ice. An adaptive particle refinement method in peridynamics was proposed to improve computational efficiency. The results obtained using the peridynamic model were compared with the experiments in previous literatures. It was found that the peridynamic… More >

Zhanqi Cheng¹, Dongdong Jin¹, Chengfang Yuan¹, Le Li^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 445-464, 2019, DOI:10.32604/cmes.2019.06374

Abstract In the research, the dynamic fracture failure problem of functionally graded materials (FGMs) containing two pre-cracks was analyzed using a bond-based Peridynamic (PD) method numerical model. The two convergence of decreasing the area of PD horizon (δ-convergence) and uniform mesh refinement (m-convergence) were studied. The effects of both crack position and distance between two cracks on crack propagation pattern in FGMs plate under tensile loads are studied. Furthermore, the effects of different gradient patterns on the dynamic propagation of cracks in FGMs are also investigated. The simulate results suggest that the cracks positions and the distance between them can significantly… More >

Tianyi Li¹, Xin Gu¹, Qing Zhang^1,*, Dong Lei¹

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 425-444, 2019, DOI:10.32604/cmes.2019.06700

Abstract Digital image correlation (DIC) measurement technique and peridynamics (PD) method have been applied in specific fields extensively owing to their respective advantages in obtaining full-field deformation and local failure of loaded materials and structures. This study provides a simple way to couple DIC measurements with PD simulations, which can circumvent the difficulties of DIC in dealing with discontinuous deformations. Taking the failure analysis of a compact tension specimen of aluminum alloy and a static three-point bending concrete beam as examples, the DIC experimental system firstly measures the full-field displacements, and then the PD simulation is applied on potential damage regions… More >

Yongwei Wang¹, Fei Han^2,*, Gilles Lubineau^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 399-423, 2019, DOI:10.32604/cmes.2019.07192

Abstract Classical continuum mechanics which leads to a local continuum model, encounters challenges when the discontinuity appears, while peridynamics that falls into the category of nonlocal continuum mechanics suffers from a high computational cost. A hybrid model coupling classical continuum mechanics with peridynamics can avoid both disadvantages. This paper describes the hybrid model and its adaptive coupling approach which dynamically updates the coupling domains according to crack propagations for brittle materials. Then this hybrid local/nonlocal continuum model is applied to fracture simulation. Some numerical examples like a plate with a hole, Brazilian disk, notched plate and beam, are performed for verification… More >

Xinfeng Wang¹, Zaixing Huang^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 385-398, 2019, DOI:10.32604/cmes.2019.06936

Abstract In the benchmark problems of peridynamics, there are some eccentric results, for example, singularity of uniaxial tension and anomalous dispersion of wave. The reasons to give rise to these results are investigated. We calculated local tension and wave of an infinite rod after adding a divergence of local stress in the peridynamic motion equation. The acquired results verify that the singularity in the peridynamic solution of local tension problem and anomalous dispersion of peridynamic wave are all eliminated. Therefore, the anomalous features of some peridynamic solutions likely stem from the lack of local stress characterizing contact interactions. More >

Huilong Ren¹, Xiaoying Zhuang^2,3,*, Timon Rabczuk¹

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 353-383, 2019, DOI:10.32604/cmes.2019.05146

Abstract A dual-support smoothed particle hydrodynamics (DS-SPH) that allows variable smoothing lengths while satisfying the conservations of linear momentum, angular momentum and energy is developed. The present DS-SPH is inspired by the dual-support, a concept introduced from dual-horizon peridynamics from the authors and applied here to SPH so that the unbalanced interactions between the particles with different smoothing lengths can be correctly considered and computed. Conventionally, the SPH formulation employs either the influence domain or the support domain. The concept of dual-support identifies that the influence domain and the support domain involves the duality and should be simultaneously in the SPH… More >

Qing Zhang^{1, *}, Jianxiang Wang², Xiaoying Zhuang^{3, 4}

CMES-Computer Modeling in Engineering & Sciences, Vol.121, No.2, pp. 349-351, 2019, DOI:10.32604/cmes.2019.09088

Abstract This article has no abstract. More >

BIOCELL, Vol.41, Suppl.S, pp. 1-74, 2017

Abstract This article has no abstract. More >

M. Rodríguez, B. Buchholz, V. D’Annuzio, M. Donato, G.E. González, M. A. Goyeneche, T. Mazo, V. Pérez, L. Wilensky, R.J. Gelpi^*

BIOCELL, Vol.40, No.1, pp. 43-46, 2016, DOI:10.32604/biocell.2016.40.043

Abstract Dystrophin is a membrane-associated protein responsible for structural stability of the sarcolemma in cardiac myocytes and is very sensitive to ischemic damage. The goal of our study was to determine if ischemic preconditioning could prevent dystrophin breakdown through inhibition of matrix metalloproteinase-2 (MMP-2) activity. Isolated rabbit hearts were subjected to global ischemia with or without reperfusion in order to evaluate if dystrophin is preserved by ischemic preconditioning through MMP-2 inhibition. Ischemic preconditioning significantly reduced the infarct size induced by 30 min of ischemia and 180 min of reperfusion. Importantly, it also diminished dystrophin proteolysis and attenuated MMP-2 activity after 30… More >