Ran Wang¹, Aimin Gong^1,*, Shanqing Shao¹, Baoli Qu², Jing Xu³, Fulai Wang¹, Feipeng Liu^3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.20, No.4, pp. 749-769, 2024, DOI:10.32604/fdmp.2023.042566

Abstract The mechanical properties of cementitious sand and gravel damming material have been experimentally determined by means of microscopic SEM (Scanning Electron Microscopy) image analysis. The results show that the combination of fly ash and water can fill the voids in cemented sand and gravel test blocks because of the presence of hydrated calcium silicate and other substances; thereby, the compactness and mechanical properties of these materials can be greatly improved. For every 10 kg/m³ increase in the amount of cementitious material, the density increases by about 2%, and the water content decreases by 0.2%. The amount of cementitious material used… More > Graphic Abstract

Xuemin Wang, Qiaochen Li, Xuguang Bao^*

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3619-3643, 2024, DOI:10.32604/cmc.2024.047586

Abstract Humans are experiencing the inclusion of artificial agents in their lives, such as unmanned vehicles, service robots, voice assistants, and intelligent medical care. If the artificial agents cannot align with social values or make ethical decisions, they may not meet the expectations of humans. Traditionally, an ethical decision-making framework is constructed by rule-based or statistical approaches. In this paper, we propose an ethical decision-making framework based on incremental ILP (Inductive Logic Programming), which can overcome the brittleness of rule-based approaches and little interpretability of statistical approaches. As the current incremental ILP makes it difficult to solve conflicts, we propose a… More >

Murugan Palanikumar¹, Nasreen Kausar^2,*, Dragan Pamucar^3,4, Seifedine Kadry^5,6,7,*, Chomyong Kim⁸, Yunyoung Nam⁹

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 3353-3385, 2024, DOI:10.32604/cmes.2024.031439

Abstract In this article, multiple attribute decision-making problems are solved using the vague normal set (VNS). It is possible to generalize the vague set (VS) and q-rung fuzzy set (FS) into the q-rung vague set (VS). A log q-rung normal vague weighted averaging (log q-rung NVWA), a log q-rung normal vague weighted geometric (log q-rung NVWG), a log generalized q-rung normal vague weighted averaging (log Gq-rung NVWA), and a log generalized q-rung normal vague weighted geometric (log Gq-rung NVWG) operator are discussed in this article. A description is provided of the scoring function, accuracy function and operational laws of the log… More >

Yixuan Yu, Yulin Wang^*, Qingcheng Li, Bowen Jiao

Energy Engineering, Vol.121, No.3, pp. 769-788, 2024, DOI:10.32604/ee.2023.044042

Abstract The plug-in hybrid vehicles (PHEV) technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks. Meanwhile, plug-in hybrid electric trucks can achieve excellent fuel economy through efficient energy management strategies (EMS). Therefore, a series hybrid system is constructed based on a 100-ton mining dump truck in this paper. And inspired by the dynamic programming (DP) algorithm, a predictive equivalent consumption minimization strategy (P-ECMS) based on the DP optimization result is proposed. Based on the optimal control manifold and the SOC reference trajectory obtained by the DP algorithm, the P-ECMS strategy… More >

Kai Long¹, Ayesha Saeed¹, Jinhua Zhang², Yara Diaeldin¹, Feiyu Lu¹, Tao Tao³, Yuhua Li^1,*, Pengwen Sun⁴, Jinshun Yan⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.1, pp. 43-67, 2024, DOI:10.32604/cmes.2023.031538

Abstract This paper offers an extensive overview of the utilization of sequential approximate optimization approaches in the context of numerically simulated large-scale continuum structures. These structures, commonly encountered in engineering applications, often involve complex objective and constraint functions that cannot be readily expressed as explicit functions of the design variables. As a result, sequential approximation techniques have emerged as the preferred strategy for addressing a wide array of topology optimization challenges. Over the past several decades, topology optimization methods have been advanced remarkably and successfully applied to solve engineering problems incorporating diverse physical backgrounds. In comparison to the large-scale equation solution,… More >

Miao Liu, Lei Feng, Yexun Yuan, Ye Liu, Peng Geng^*

Journal on Artificial Intelligence, Vol.5, pp. 181-193, 2023, DOI:10.32604/jai.2023.046066

Abstract This article aims to address the clustering effect caused by unorganized charging of electric vehicles by adopting a two-tier recommendation method. The electric vehicles (EVs) are classified into high-level alerts and general alerts based on their state of charge (SOC). EVs with high-level alerts have the most urgent charging needs, so the distance to charging stations is set as the highest priority for recommendations. For users with general alerts, a comprehensive EV charging station recommendation model is proposed, taking into account factors such as charging price, charging time, charging station preference, and distance to the charging station. Using real data… More >

Feng Yang¹, Zhong Wu^2,*, Xiaoyan Teng¹

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.1, pp. 719-738, 2024, DOI:10.32604/cmes.2023.028699

Abstract The low efficiency and high cost of fresh agricultural product terminal distribution directly restrict the operation of the entire supply network. To reduce costs and optimize the distribution network, we construct a mixed integer programming model that comprehensively considers to minimize fixed, transportation, fresh-keeping, time, carbon emissions, and performance incentive costs. We analyzed the performance of traditional rider distribution and robot distribution modes in detail. In addition, the uncertainty of the actual market demand poses a huge threat to the stability of the terminal distribution network. In order to resist uncertain interference, we further extend the model to a robust… More > Graphic Abstract

Baofeng Ji^1,2,3,4,*, Yifan Liu^1,2,3,4, Tingpeng Li¹, Ling Xing², Weixing Wang², Shahid Mumtaz⁵, Xiaolong Shang⁶, Wanying Liu², Congzheng Han⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.1, pp. 679-689, 2024, DOI:10.32604/cmes.2023.028667

Abstract With the development of information technology, more and more devices are connected to the Internet through wireless communication to complete data interconnection. Due to the broadcast characteristics of wireless channels, wireless networks have suffered more and more malicious attacks. Physical layer security has received extensive attention from industry and academia. MIMO is considered to be one of the most important technologies related to physical layer security. Through beamforming technology, messages can be transmitted to legitimate users in an offset direction that is as orthogonal as possible to the interference channel to ensure the reception SINR by legitimate users. Combining the… More >

Ali S. Alghamdi¹, Mohana Alanazi², Abdulaziz Alanazi³, Yazeed Qasaymeh^1,*, Muhammad Zubair^1,4, Ahmed Bilal Awan⁵, M. G. B. Ashiq⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2163-2192, 2023, DOI:10.32604/cmes.2023.029453

Abstract To maximize energy profit with the participation of electricity, natural gas, and district heating networks in the day-ahead market, stochastic scheduling of energy hubs taking into account the uncertainty of photovoltaic and wind resources, has been carried out. This has been done using a new meta-heuristic algorithm, improved artificial rabbits optimization (IARO). In this study, the uncertainty of solar and wind energy sources is modeled using Hang’s two-point estimating method (TPEM). The IARO algorithm is applied to calculate the best capacity of hub energy equipment, such as solar and wind renewable energy sources, combined heat and power (CHP) systems, steam… More >

Hasan Sh. Majdi^a , Ammar Abdulkadhim^b,* , Azher M. Abed^b

Frontiers in Heat and Mass Transfer, Vol.12, pp. 1-14, 2019, DOI:10.5098/hmt.12.2

Abstract Fluid flow and natural convection heat transfer in a parallelogram enclosure with an inner circular cylinder using Cu-water nanofluid are studied numerically. Dimensionless Navier-Stokes and energy equations are solved numerically using finite element method based two-dimensional flow and steady-state conditions. This study evaluates the effect of different concentrations of Cu-water nanofluids (0% to 6%) with different Rayleigh numbers 10³ ≤ Ra ≤ 10⁶ under isotherm wall temperatures. The effects of geometrical parameters of the parallelogram enclosure (inclination angle in range of 0 ≤ α ≤ 30 and location of inner circular cylinder -0.2 ≤ H ≤ +0.2 on the flow… More >