Hassen Mohamed Sbihi^1,*, Hamid Shaikh², Lahssen El Blidi², Imed Arbi Nehdi¹, Ubair Abdus Samad², Moufida Romdhani-Younes³, Saud Ibrahim Al-Resayes¹

Journal of Renewable Materials, Vol.6, No.6, pp. 651-661, 2018, DOI:10.7569/JRM.2018.634105

Abstract In this study, different samples of alkyd resins based on Citrullus colocynthis seed oil (CCSO)—which has a high content of linoleic acid—were prepared as a renewable raw material. Short (I), medium (II), and long (III) alkyd resins were synthesized using oil, glycerol, and phthalic anhydride (PA) in different proportions. Prunus mahaleb seed oil (PMSO), which contains conjugated linolenic acid, was blended with CCSO in different proportions to examine the effect of PMSO on the film properties of alkyd resins (IV and V). All synthesized resins were characterized by FTIR and 1H NMR spectroscopic analysis. These resins were also cured by… More >

Maha L. Shrestha^1,2,*, Mihail Ionescu¹, Xianmei Wan¹, Thomas Upshaw³

Journal of Renewable Materials, Vol.6, No.6, pp. 630-641, 2018, DOI:10.7569/JRM.2018.634106

Abstract Aromatic-aliphatic polyols were obtained previously from the thiol-ene reactions of propoxylated cardanol with hydroxyalkyl mercaptans; these aromatic-aliphatic polyols were then utilized in the preparation of rigid polyurethane foams with excellent properties. The current work describes a variant of cardanol polyol synthesis by thiol-ene reactions in three steps. The first step is propoxylation of cardanol by reacting cardanol with propylene oxide; the second step is mercaptanization of propoxylated cardanol by reacting double bonds with hydrogen sulfide; and the third step involves the addition of the thiol groups of mercaptanized propoxylated cardanol to the double bonds of allyl alcohol, glycerol-1-allyl ether, and… More >

Xiaorong Zhao¹, Hongjin Zhu¹, Xiufang Qian^1,*, Chunpeng Ge²

Journal on Internet of Things, Vol.1, No.2, pp. 55-62, 2019, DOI:10.32604/jiot.2019.06315

Abstract In recent years, with the rapid development of China’s economy and the continuous improvement of people’s living standards, the number of motor vehicles and the number of drivers in the country have grown rapidly. Due to the increase in the number of vehicles and the number of motorists, the traffic accident rate is increasing, causing serious economic losses to society. According to the traffic accident statistics of the Ministry of Communications of China in 2009, more than 300,000 car accidents occurred in the year, most of which were caused by drunk driving. Therefore, this paper proposes a design scheme based… More >

Elena Fortunati^1*, Francesca Luzi¹, Chiara Fanali², Laura Dugo², Maria Giovanna Belluomo², Luigi Torre¹, José Maria Kenny¹, Luca Santi³, Roberta Bernini³

Journal of Renewable Materials, Vol.5, No.2, pp. 81-95, 2017, DOI:10.7569/JRM.2016.634132

Abstract Hydroxytyrosol (HTyr), a biophenol found in extra-virgin olive oil or olive oil by-products, well known for its strong antioxidant activity, was used as active ingredient for poly(vinyl alcohol) (PVA) matrix to develop film formulations by solvent casting process. The effect of HTyr on the morphological, thermal stability, optical, mechanical and release properties of PVA were investigated, while water absorption capacity, migration with food stimulants, water vapor permeability and antioxidant properties were tested taking into account the final application as food packaging systems. Morphological investigations evidenced homogeneity of all PVA/HTyr films, while the presence of HTyr clearly accounted for an increase… More >

G.Pétré¹, K.Tshinyama, A. Azouni², S. Van Vaerenbergh¹

FDMP-Fluid Dynamics & Materials Processing, Vol.4, No.1, pp. 1-10, 2008, DOI:10.3970/fdmp.2008.004.001

Abstract This study illustrates a relevant and practical method to determine the effective surface tension gradient in a layer subjected to a lateral temperature difference. In general, this can be hardly performed in situ without perturbing the flow. For this reason we rely on an indirect determination approach. A simple model is developed that relates the surface tension gradient to other quantities that can be measured without introducing significant disturbances in the system. Measurements of these quantities are performed in a set-up where the flow corresponds with a good approximation to a one-dimensional model. A previously used set-up has been upgraded… More >