T.Y. Wu¹, W.C. Tsai², J.J. Lee²

CMC-Computers, Materials & Continua, Vol.17, No.3, pp. 175-214, 2010, DOI:10.3970/cmc.2010.017.175

Abstract The crushing of cellular materials is a highly nonlinear problem, for which geometrical, material, and contact/impact must be treated in one analysis. In order to develop a framework able to solve it efficiently and accurately, in this paper procedures for in-plane crushing analysis of cellular materials using vector form intrinsic finite element (VFIFE) is performed. A beam element of VFIFE is employed to handle large rotation and large deflection in the cell walls. An elastic-plastic material model with mixed hardening rule is adopted to account for material nonlinearity. In addition, an efficient contact/impact algorithm is designed to treat the complex… More >

S. Patala¹, C.A. Schuh¹

CMC-Computers, Materials & Continua, Vol.17, No.1, pp. 1-18, 2010, DOI:10.3970/cmc.2010.017.001

Abstract Recent advances in microstructural characterization have made it possible to measure grain boundaries and their networks in full crystallographic detail. Statistical studies of the complete boundary space using full crystallographic parameters (misorientations and boundary plane inclinations) are limited because the topology of the parameter space is not understood (especially for homophase grain boundaries). This paper addresses some of the complexities associated with the group space of grain boundaries, and resolves the topology of the complete boundary space for systems of two-dimensional crystals. Although the space of homophase boundaries is complicated by the existence of a `no-boundary' singularity, i.e., no boundary… More >

Giacomo Landi¹, Surya R. Kalidindi²

CMC-Computers, Materials & Continua, Vol.16, No.3, pp. 273-294, 2010, DOI:10.3970/cmc.2010.016.273

Abstract In this paper, we present a computationally efficient multi-scale framework for predicting the local fields in the representative volume element of a multiphase material system subjected to thermo-mechanical loading conditions. This framework for localization relationships is a natural extension of our recent work on two-phase composites subjected to purely mechanical loading. In this novel approach, the localization relationships take on a simple structure expressed as a series sum, where each term in the series is a convolution product of local structure and the governing physics expressed in the form of influence coefficients. Another salient feature of this approach is its… More >

Zone-Ching Lin¹and Ren-Yuan Wang¹

CMC-Computers, Materials & Continua, Vol.16, No.3, pp. 247-272, 2010, DOI:10.3970/cmc.2010.016.247

Abstract The paper establishes a new three-dimensional quasi-steady molecular statics nanoscale abrasive cutting model to investigate the abrasive cutting behavior in the downpressing and abrasive cutting process of a workpiece in chemical mechanical polishing (CMP) process. The downpressing and abrasive cutting process is a continuous process. The abrasive cutting process is done after the single abrasive particle has downpressed and penetrated a workpiece to a certain depth of a workpiece. The paper analyzes the effects of the abrasive particles with different diameters on action force. It also analyzes the action force change of abrasive particles with different diameters on the projected… More >

O. U. Ojeda¹ and T. Çagınˇ ¹

CMC-Computers, Materials & Continua, Vol.16, No.2, pp. 127-174, 2010, DOI:10.3970/cmc.2010.016.127

Abstract The large discrepancy in length and time scales at which characteristic processes of energetic materials are of relevance pose a major challenge for current simulation techniques. We present a systematic study of crystalline energetic materials of different sensitivity and analyze their properties at different theoretical levels. Information like equilibrium structures, vibrational frequencies, conformational rearrangement and mechanical properties like stiffness and elastic properties can be calculated within the density functional theory (DFT) using different levels of approximations. Dynamical properties are obtained by computations using molecular dynamics at finite temperatures through the use of classical force fields. Effect of defects on structure… More >

J. Zidek¹ , J. Kucera¹, J. Jancar¹

CMC-Computers, Materials & Continua, Vol.16, No.1, pp. 51-74, 2010, DOI:10.3970/cmc.2010.016.051

Abstract It has been shown that in particulate filled composites, a cross-property relationship exists between various transport properties (e.g., electrical conductivity, mechanical reinforcement, gas permeation) of a macroscale composite. Thus, knowledge of the effective mechanical properties of a composite immediately places bounds on its electrical conductivity or gas permeation behavior. Using these bounds allows us to predict the phase dispersion state that optimizes one or multiple properties of the composite and, thus, the knowledge of how spatial arrangement of filler particles at their given content affects physical properties of the composite can be valuable. In this paper, a new numerical model… More >

F.Y.Li^1,2, G.Y.Li¹

CMC-Computers, Materials & Continua, Vol.15, No.3, pp. 199-220, 2010, DOI:10.3970/cmc.2010.015.199

Abstract In this paper, an uncertain multi-objective optimization method is suggested to deal with crashworthiness design problem of vehicle, in which the uncertainties of the parameters are described by intervals. Considering both lightweight and safety performance, structural weight and peak acceleration are selected as objectives. The occupant distance is treated as constraint. Based on interval number programming method, the uncertain optimization problem is transformed into a deterministic optimization problem. The approximation models are constructed for objective functions and constraint based on Latin Hypercube Design (LHD). Thus, the interval number programming method is combined with the approximation model to solve the uncertain… More >

Hrvoje Gotovac¹, Vedrana Kozulić², Blaž Gotovac¹

CMC-Computers, Materials & Continua, Vol.15, No.3, pp. 173-198, 2010, DOI:10.3970/cmc.2010.015.173

Abstract The space-time Adaptive Fup Collocation Method (AFCM) for solving boundary-initial value problems is presented. To solve the one-dimensional initial boundary value problem, we convert the problem into a two-dimensional boundary value problem. This quasi-boundary value problem is then solved simultaneously in the space-time domain with a collocation technique and by using atomic Fup basis functions. The proposed method is a generally meshless methodology because it requires only the addition of collocation points and basis functions over the domain, instead of the classical domain discretization and numerical integration. The grid is adapted progressively by setting the threshold as a direct measure… More >

Hamad F. Al-Harbi¹, Marko Knezevic^1,2, Surya R. Kalidindi^1,3

CMC-Computers, Materials & Continua, Vol.15, No.2, pp. 153-172, 2010, DOI:10.3970/cmc.2010.015.153

Abstract In recent work, we have demonstrated the viability and computational advantages of DFT-based spectral databases for facilitating crystal plasticity solutions in face-centered cubic (fcc) metals subjected to arbitrary deformation paths. In this paper, we extend and validate the application of these novel ideas to body-centered cubic (bcc) metals that exhibit a much larger number of potential slip systems. It was observed that the databases for the bcc metals with a larger number of slip systems were more compact compared to those obtained previously for fcc metals with a smaller number of slip systems. Furthermore, we demonstrate in this paper that… More >

Dustin D. Gerrard¹, David T. Fullwood¹, Denise M. Halverson², Stephen R. Niezgoda³

CMC-Computers, Materials & Continua, Vol.15, No.2, pp. 129-152, 2010, DOI:10.3970/cmc.2010.015.129

Abstract The effective properties of composite materials are often strongly related to the connectivity of the material components. Many structure metrics, and related homogenization theories, do not effectively account for this connectivity. In this paper, relationships between the topology, represented via homology theory, and the effective elastic response of composite plates is investigated. The study is presented in the context of popular structure metrics such as percolation theory and correlation functions. More >