C. F. Chen¹, H. Y. Li¹, C. W. Hong^1,2

CMC-Computers, Materials & Continua, Vol.46, No.3, pp. 145-163, 2015, DOI:10.3970/cmc.2015.046.145

Abstract The purpose of this research is to improve the discharge rate and to predict the melting point of high-temperature molten-salt electrolytes in thermal batteries. Using molecular dynamics (MD) simulation techniques, we tried to develop some novel ternary and quaternary molten electrolytes to replace conventional binary LiCl-KCl ones. The simulation results with greater ionic conductivity and lower melting point are consistent with experimental results reported by previous literatures. The MD results have found that the lithium ion mole fraction in the molten-salt electrolytes affects the ionic conductivity significantly. This paper demonstrates that MD simulation techniques are a useful tool to screen… More >

W. Xia¹, Y.P. Feng², D.W. Zhao³

CMC-Computers, Materials & Continua, Vol.46, No.2, pp. 125-144, 2015, DOI:10.3970/cmc.2015.046.125

Abstract Postbuckling analysis of functionally graded ceramic-metal plates under temperature field is presented using finite element multi-mode method. The three-node triangular element based on the Mindlin plate theory is employed to account for the transverse shear strains, and the von-Karman nonlinear strain-displacement relation is utilized considering the geometric nonlinearity. The effective material properties are assumed to vary through the thickness direction according to the power law distribution of the volume fraction of constituents. The temperature distribution along the thickness is determined by one dimensional Fourier equations of heat conduction. The buckling mode shape solved from eigen-buckling analysis is adopted as the… More >

Qunfeng Liu^1,2, Liang Wang¹, gping Shen¹

CMC-Computers, Materials & Continua, Vol.46, No.2, pp. 105-123, 2015, DOI:10.3970/cmc.2015.046.105

Abstract Molecular dynamics simulations have been performed to investigate the effects of cross section geometry and shape on the mechanical behaviors of silicon nanowires (Si NWs) under tensile loading. The results show that elasticity of <100> rectangular Si NWs depends on their cross section aspect ratios while the elastic limits of <110> and <111> wires show geometry independence. Despite the significant influence of axial orientation, both yield stress and Young's Modulus show the remarkable shape dependence for wires with various regular cross sections. Additionally, underlying mechanism for the geometry and shape effects on mechanical behavior are discussed based on the fundamental… More >

Ligia Munteanu¹, Dan Dumitriu¹, Veturia Chiroiu¹, Cornel Bri¸san², Doina Marin¹

CMC-Computers, Materials & Continua, Vol.46, No.2, pp. 79-103, 2015, DOI:10.3970/cmc.2015.046.079

Abstract A flexible finger with muscles made of Nitinol wires and the skin made of auxetic material is analyzed from the tactile sensing point of view. The recognizing of the shape and texture of 3D objects is performed by simulation the action of an array of nanopiezotronic transistors integrated into the skin. The array of nanopiezotronic transistors makes possible the detection of the pressure-induced changes in the auxetic skin. The shape and texture of the objects is best estimated by determining the surface and texture as an n-ellipsoid defined by 12 parameters. An inverse problem is solved in order to find… More >

Al-Bahkali Essam¹, Souli Mhamed², Al-Bahkali Thamar¹

CMC-Computers, Materials & Continua, Vol.46, No.1, pp. 57-78, 2015, DOI:10.3970/cmc.2015.046.057

Abstract Simulation of hydrodynamic impact problems and its effect on surrounding structures, can be considered as a fluid structure coupling problem. The application is mainly used in automotive and aerospace engineering and also in civil engineering. Classical FEM and Finite Volume methods were the main formulations used by engineers to solve these problems. For the last decades, new formulations have been developed for fluid structure coupling applications using mesh free methods as SPH method, (Smooth Particle Hydrodynamic) and DEM (Discrete Element Method). Up to these days very little has been done to compare different methods and assess which one would be… More >

Chih-Ping Wu, Ruei-Yong Jiang

CMC-Computers, Materials & Continua, Vol.46, No.1, pp. 17-56, 2015, DOI:10.3970/cmc.2015.046.017

Abstract An asymptotic meshless method using the differential reproducing kernel (DRK) interpolation and multiple time scale methods is developed for the three-dimensional (3D) free vibration analysis of sandwich functionally graded material (FGM) circular hollow cylinders with combinations of simply-supported and clamped edge conditions. In the formulation, we perform the mathematical processes of nondimensionalization, asymptotic expansion and successive integration to obtain recurrent sets of motion equations for various order problems. Classical shell theory (CST) is derived as a first-order approximation of the 3D elasticity theory, and the motion equations for higher-order problems retain the same differential operators as those of CST, although… More >

¹Poh-Sang Lam², Jwo Pan³

CMC-Computers, Materials & Continua, Vol.46, No.1, pp. 1-16, 2015, DOI:10.3970/cmc.2015.046.001

Abstract A full range of stress intensity factor solutions for a kinked crack with finite length is developed as a function of weld width and the sheet thickness. When used with the main crack solutions (global stress intensity factors) in terms of the applied load and the specimen geometric parameters, the fatigue lives of the kinked crack can be estimated for the laser-welded lap-shear specimens. The predicted curve for the load range-fatigue life passes through the cluster of experimental data and is in good agreement. A classical solution associated with an infinitesimal kink is also employed. However, its life prediction tends… More >

Mohamed I. A. Othman^1,2,3, W. M. Hasona^2,4, Nehal T. Mansour^2,5

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 203-220, 2015, DOI:10.3970/cmc.2015.045.203

Abstract The problem of the generalized thermoelastic medium for three different theories under the effect of a gravitational field is investigated. The Lord- Shulman, Green-Naghdi III, three-phase-lag theories are discussed with twotemperature. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, thermodynamic temperature and conductive temperature. The numerical results are given and presented graphically, when the thermal force is applied. Comparisons are made with the results predicted by three-phase-lag model, Green-Naghdi III and Lord-Shulman theories in the presence and absence of gravity as well as two temperature. More >

M.R. Akbari¹, J. Ghanbari^1,2

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 187-202, 2015, DOI:10.3970/cmc.2015.045.187

Abstract Exact analytical solution for functionally graded hollow discs under internal pressure, thermal load and rotation are provided in this paper. Material properties of discs, i.e. elastic modulus, density and thermal expansion coefficient are assumed to vary in radial direction. Two power functions are assumed for property dependency to study various types of functional grading of materials in the discs. Assuming small deformations, a differential equation is obtained and solved for the Airy stress function. The effects of various grading functions on the stress and deformation distribution are studied and an optimum value for the power is obtained. More >

Jianfeng Lu¹, Xu Liang^1,2, Shuling Hu^1,2

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 145-162, 2015, DOI:10.3970/cmc.2015.045.145

Abstract Flexoelectricity phenomenologically describes the universal electromechanical coupling effect between electric polarization and strain gradient, and electric field gradient and elastic strain. In contrast to piezoelectricity which is invalid in materials with inversion symmetry, flexoelectricity exists, commonly, in all solid dielectrics. In this paper, a summary of the research on flexoelectricity is presented to illustrate the development of this topic. Flexoelectricity still have many open questions and unresolved issues in the developing field, although it has attracted a surge of attention recently. Here we review the theoretical investigations and experimental studies on flexoelectricity, and the aim of the current paper is… More >