Xiang Zhang¹, Xiaona Zhang^2,4,*, Xiaorui Zhang^3,5,6, Wei Sun^6,7, Ruohan Meng⁸, Xingming Sun¹

Computer Systems Science and Engineering, Vol.46, No.1, pp. 225-239, 2023, DOI:10.32604/csse.2023.034915

Abstract The data in the blockchain cannot be tampered with and the users are anonymous, which enables the blockchain to be a natural carrier for covert communication. However, the existing methods of covert communication in blockchain suffer from the predefined channel structure, the capacity of a single transaction is not high, and the fixed transaction behaviors will lower the concealment of the communication channel. Therefore, this paper proposes a derivation matrix-based covert communication method in blockchain. It uses dual-key to derive two types of blockchain addresses and then constructs an address matrix by dividing addresses into multiple layers to make full… More >

Pengwei Yang¹, Yuqi Cao², Jie Tan², Junfa Chen¹, Chao Zhang¹, Yan Wang¹, Haifeng Liang^2,*

Energy Engineering, Vol.120, No.3, pp. 743-762, 2023, DOI:10.32604/ee.2023.024128

Abstract At present, the large-scale access to electric vehicles (EVs) is exerting considerable pressure on the distribution network. Hence, it is particularly important to analyze the capacity of the distribution network to accommodate EVs. To this end, we propose a method for analyzing the EV capacity of the distribution network by considering the composition of the conventional load. First, the analysis and pretreatment methods for the distribution network architecture and conventional load are proposed. Second, the charging behavior of an EV is simulated by combining the Monte Carlo method and the trip chain theory. After obtaining the temporal and spatial distribution… More >

Jiulong Sun¹, Yanbo Che^1,*, Ting Yang¹, Jian Zhang², Yibin Cai¹

Energy Engineering, Vol.120, No.2, pp. 367-384, 2023, DOI:10.32604/ee.2023.023661

Abstract As the number of electric vehicles (EVs) continues to grow and the demand for charging infrastructure is also increasing, how to improve the charging infrastructure has become a bottleneck restricting the development of EVs. In other words, reasonably planning the location and capacity of charging stations is important for development of the EV industry and the safe and stable operation of the power system. Considering the construction and maintenance of the charging station, the distribution network loss of the charging station, and the economic loss on the user side of the EV, this paper takes the node and capacity of… More > Graphic Abstract

Chang Liu¹, Bo Luo¹, Wei Wang¹, Hongyuan Gao¹, Zhixun Wang², Hongfa Ding^3,*, Mengqi Yu⁴, Yongquan Peng⁵

Energy Engineering, Vol.120, No.2, pp. 541-559, 2023, DOI:10.32604/ee.2022.022610

Abstract Building structures themselves are one of the key areas of urban energy consumption, therefore, are a major source of greenhouse gas emissions. With this understood, the carbon trading market is gradually expanding to the building sector to control greenhouse gas emissions. Hence, to balance the interests of the environment and the building users, this paper proposes an optimal operation scheme for the photovoltaic, energy storage system, and flexible building power system (PEFB), considering the combined benefit of building. Based on the model of conventional photovoltaic (PV) and energy storage system (ESS), the mathematical optimization model of the system is proposed… More >

Nima Pirhadi¹, Xusheng Wan¹, Jianguo Lu¹, Jilei Hu^2,3,*, Mahmood Ahmad^4,5, Farzaneh Tahmoorian⁶

CMES-Computer Modeling in Engineering & Sciences, Vol.135, No.1, pp. 733-754, 2023, DOI:10.32604/cmes.2022.022207

Abstract Liquefaction is one of the most destructive phenomena caused by earthquakes, which has been studied in the issues of potential, triggering and hazard analysis. The strain energy approach is a common method to investigate liquefaction potential. In this study, two Artificial Neural Network (ANN) models were developed to estimate the liquefaction resistance of sandy soil based on the capacity strain energy concept (W) by using laboratory test data. A large database was collected from the literature. One group of the dataset was utilized for validating the process in order to prevent overtraining the presented model. To investigate the complex influence… More >

Qiang Li^1,2,*, Pan Chen¹, Lihong Gao¹, Dan Meng¹, Jinjie Zou¹

CMES-Computer Modeling in Engineering & Sciences, Vol.135, No.1, pp. 465-481, 2023, DOI:10.32604/cmes.2022.020300

Abstract Monopiles are the most common foundation form of offshore wind turbines, which bear the vertical load, lateral load and bending moment. It remains uncertain whether the applied vertical load increases the lateral deflection of the pile. This paper investigated the influence of vertical load on the behaviour of monopiles installed in the sand under combined load using three-dimensional numerical methods. The commercial software PLAXIS was used for simulations in this paper. Monopiles were modelled as a structure incorporating linear elastic material behaviour and soil was modelled using the Hardening-Soil (HS) constitutive model. The monopiles under vertical load, lateral load and… More >

Rasool M. Imran^1,2,*, Mohammed R. Saeed¹, Mohammed Amer Mohammed³, Osama A. Suhry³, Ihsan H. Abdulqadder⁴, Hasan Wahhab Salih⁵, Mohammed R. Almallah⁶, Firas M. F. Flaih³

Energy Engineering, Vol.119, No.6, pp. 2447-2467, 2022, DOI:10.32604/ee.2022.021871

Abstract

Usually, rural areas can be electrified via three-phase distribution transformers with relatively large capacities. In such areas, low voltage lines are used for long distances, which cause power losses and voltage drop for different types of consumers. Reducing losses and improving voltage profiles in rural distribution networks are significant challenges for electricity distribution companies. However different solutions were proposed in the literature to overcome these challenges, most of them face difficulties when applied in the conventional distribution network. To address the above issues, an applicable solution is proposed in this paper by installing a number of small-capacity distribution transformers instead… More >

Baoge Zhang¹, Shanyan Ping^1,*, Haoliang Shi², Yi Long¹, Boxiang Wu¹, Yuemin Jiao¹

Energy Engineering, Vol.119, No.6, pp. 2347-2367, 2022, DOI:10.32604/ee.2022.021693

Abstract Renewable energy is connected to the grid through the inverter, which in turn reduces the inertia and stability of the power grid itself. The traditional grid-connected inverter does not have the function of voltage regulation and frequency regulation and can therefore no longer adapt to the new development. The virtual synchronous generator (VSG) has the function of voltage regulation and frequency regulation, which has more prominent advantages than traditional inverters. Based on the principle of VSG, the relationship between the frequency characteristics and the energy storage capacity of the feedforward branch-based virtual synchronous machine (FVSG) is derived when the input… More >

Ruoqiong Li^1,*, Linrun Xiao¹, Jingtao Lu², Xin Li²

Energy Engineering, Vol.119, No.6, pp. 2533-2548, 2022, DOI:10.32604/ee.2022.020803

Abstract In electrified railways, traction load not only fluctuates between peaks and valleys, but also has a situation of low utilization rate of average load throughout the day and short overload. The traction transformer selects the capacity with the peak load as the demand boundary, which will cause the capacity utilization rate to be low and even lead to the economic decline of the traction power supply system. This article summarizes the existing configuration methods for capacity optimization of traction transformer. Then under the conditions of energy storage and new energy access to traction power supply system, the three aspects are… More >

Saima Kanwal¹, Feng Tao^1,*, Ahmad Almogren², Ateeq Ur Rehman³, Rizwan Taj¹, Ayman Radwan⁴

CMES-Computer Modeling in Engineering & Sciences, Vol.134, No.1, pp. 201-219, 2023, DOI:10.32604/cmes.2022.020255

Abstract The authenticity and integrity of healthcare is the primary objective. Numerous reversible watermarking schemes have been developed to improve the primary objective but increasing the quantity of embedding data leads to covering image distortion and visual quality resulting in data security detection. A trade-off between robustness, imperceptibility, and embedded capacity is difficult to achieve with current algorithms due to limitations in their ability. Keeping this purpose insight, an improved reversibility watermarking methodology is proposed to maximize data embedding capacity and imperceptibility while maintaining data security as a primary concern. A key is generated by a random path with minimum bit… More >