Poonam Trivedi¹, Jens Schaller², Jan Gustafsson¹, Pedro Fardim^1,3*

Journal of Renewable Materials, Vol.5, No.5, pp. 400-409, 2017, DOI:10.7569/JRM.2017.634143

Abstract In the present study, we report the supramolecular design of cellulose-sulfonate hydrogel beads by blending water soluble sodium cellulose ethyl sulfonate (CES) with the pretreated cellulose in sodium hydroxide-ureawater solvent system at −6 °C followed by coagulation in the 2M sulfuric acid system. The increasing of CES amount from 10% to 90% had a substantial effect on the viscosity and storage (G′) and loss (G″) moduli of the blended solutions. The CES concentration up to 50% in blends led to the formation of physically stable hydrogels after coagulation in acidic medium at pH-1 and showed the retention of nearly the… More >

G. Mondragon, C. Peña-Rodriguez, A. Eceiza, A. Arbelaiz^*

Journal of Renewable Materials, Vol.5, No.5, pp. 345-356, 2017, DOI:10.7569/JRM.2017.634124

Abstract In this work, the main chemical reactions conditions of a succession of specific chemical treatments used for the isolation of nanocellulose from sisal fibers were evaluated. The novelty of this work is the study done to analyze the effect of different reaction conditions (time or concentration) in fiber structure and composition as well as in the characteristics of obtained cellulosic samples. In order to achieve this goal different physicochemical, thermal and morphological characterization techniques were used after each chemical treatment and the most suitable reaction conditions were selected for the subsequent treatment. Moreover, the thermal stability evolution of cellulose nanocrystals… More >

Melissa Camacho¹, Yendry Regina Corrales Ureña^*,1, Mary Lopretti², Leonel Bustamante Carballo¹, Galia Moreno¹, Brian Alfaro¹, Jose Roberto Vega Baudrit^1,3

Journal of Renewable Materials, Vol.5, No.5, pp. 271-279, 2017, DOI:10.7569/JRM.2017.634117

Abstract Pineapple peel biomass was used as raw material for nanocellulose extraction. The raw material is a residue from the Costa Rican fruit industry. The nanocellulose was obtained by a two-step hydrolysis process. Firstly, the cellulose was hydrolyzed with HCl to obtain microcrystalline cellulose. In the second step, the hydrolysis was carried out using H2SO4 to obtain smaller fragments and decrease the lignin content. A timedependent study was carried out to determine the particle size decrease depending on the contact time with the H2SO4. The chemical, thermal and morphological properties were analyzed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA),… More >

Nicole Segura Salas¹, Felipe Orozco Gutiérrez³, Luis Daniel Mora Murillo², Yendry Corrales Ureña³, Shakira Johnson¹, José Vega Baudrit³, Rodolfo Jesús González-Paz^3*

Journal of Renewable Materials, Vol.5, No.3-4, pp. 313-322, 2017, DOI:10.7569/JRM.2017.634122

Abstract Vegetable oils are being used for the production of biodegradable polymers, opening new possibilities for the synthesis of greener materials that could compete in national markets with petroleum-based polymers. In this study, castor oil and a catalyst (cobalt[II] naphtenate as promotor and MEKP as initiator) from local stores and styrene in different ratios were used to produce thermostable polymers. The kinetics of the polymerization reaction was followed by infrared spectroscopy. A polymeric material was synthetized which presents good mechanical properties. Therefore, composites were produced using 1 wt% of microcellulose extracted from biomass waste as reinforcement or 1 wt% microsilica to… More >

A. Delgado-Lima, M. C. Paiva^*, A. V. Machado

Journal of Renewable Materials, Vol.5, No.2, pp. 145-153, 2017, DOI:10.7569/JRM.2017.634104

Abstract Cellulose acetate (CA) is produced from a natural polymer and presents excellent properties, finding applications in a variety of areas. Unlike cellulose, CA is melt processable and may be molded into parts and formed into fibers or films. In this context, the production of conductive CA composites that may be processable and integrated into parts to provide specific functionalities is an area of increasing interest. The present work aims to prepare electrically conductive composites based on CA and carbon nanotubes (CNTs) by melt mixing. The nanocomposites were produced with pure and pyrrolidine-functionalized nanotubes, using a batch mixer and a twin-screw… More >

F. Luzi¹, E. Fortunati^1*, A. Jiménez², D. Puglia¹, A. Chiralt², L. Torre¹

Journal of Renewable Materials, Vol.5, No.2, pp. 103-115, 2017, DOI:10.7569/JRM.2016.634135

Abstract Poly(lactic acid) (PLA) based nanocomposites reinforced with 1 wt% of surfactant-modified cellulose nanocrystals (s-CNC) extracted from Posidonia oceanica plant waste and zinc oxide nanoparticles (ZnO NPs) at different concentrations (0.1 and 0.5 wt%) were prepared by solvent casting process. Their thermal, morphological, optical, mechanical and water vapor permeability properties were investigated. Tensile testing showed increased values for strength and deformation at break in PLA based formulations reinforced with s-CNC and ZnO NPs as a consequence of better nanofiller dispersion compared to binary films reinforced only with ZnO NPs. Moreover, the effect of s-CNC and ZnO NPs provoked an improvement of… More >

Heather L. Buckley^1*, Caitlin H. Touchberry², Jonathan P. McKinley², Zachary S. Mathe¹, Hurik Muradyan¹, Hannah Ling², Raj P. Fadadu¹, Martin J. Mulvihill¹, Susan E. Amrose²

Journal of Renewable Materials, Vol.5, No.1, pp. 1-13, 2017, DOI:10.7569/JRM.2016.634109

Abstract Waste cardboard is an underutilized resource that can be redirected for the creation of safer and higher quality building materials for low-income housing in the developing world, as well as to produce better materials for indoor environments in developed-world contexts. Using a renewable biobased binder and benign additives, we have improved the water resistance of a cardboard-based composite material, overcoming one of the major barriers to scaling and adoption of this class of materials. Resistance to water uptake was significantly increased with several additives and was increased over 900-fold in the best case. Strength and water uptake over time are… More >

Mingzhe Jiang¹, S. Nicole DeMass¹, D. Ross Economy², Thomas Shackleton¹, Christopher L. Kitchens^1*

Journal of Renewable Materials, Vol.4, No.5, pp. 377-387, 2016, DOI:10.7569/JRM.2016.634131

Abstract Spin coating was used to cast a uniform film of cellulose nanocrystals with low surface roughness and variable thickness as a function of operational parameters that include rotational speed and dispense suspension concentration. The film thickness was controllable from 40 nm up to 1 μm with surface roughness an order of magnitude less than blade-coating methods. The degree of radial orientation was qualitatively assessed and shown to be variable with processing parameters. Under specific processing conditions, the formation of striation patterns was observed and associated with film drying instability. The striation patterns are periodic in nature where the wavelength and… More >

Mehdi Tajvidi^1*, Douglas J. Gardner², Douglas W. Bousfield³

Journal of Renewable Materials, Vol.4, No.5, pp. 365-376, 2016, DOI:10.7569/JRM.2016.634103

Abstract A novel application of cellulose nanomaterials, particularly cellulose nanofibrils (CNF) as a binder in conventional and novel laminate and particulate composite systems is discussed. Using cellulose nanomaterials as a reinforcing agent in conventional polymer composites faces several difficulties: 1) there are no easy ways to dry the CNF and maintain nanoscale dimensions, 2) there are compatibility issues related to cellulose-polymer bonding, and 3) there are issues related to obtaining a good distribution and redispersion of nanoscale materials inside a polymer matrix. An alternative strategy is applications in which cellulose nanomaterials can be used in the aqueous suspension form without first… More >

Jithin Joy^1,2,3, Cintil Jose³, Srirama B. Varanasi⁴, Lovely Mathew P.^2,3, Sabu Thomas², Srikanth Pilla^1,5*

Journal of Renewable Materials, Vol.4, No.5, pp. 351-364, 2016, DOI:10.7569/JRM.2016.634128

Abstract Isora nanofibers (INF) were produced by a combined thermal-chemical-mechanical method from Helicteres isora plant. The resulting fibers were analyzed using transmission electron microscopy and scanning electron microscopy, which showed a network-like structure with a length of 600 nm, width of 50 nm and an aspect ratio of 12. Fourier transform infrared spectroscopy indicated that chemical treatments progressively removed noncellulosic constituents. X-ray diffraction analysis revealed that crystallinity increased with successive chemical treatments. Using the synthesized isora nanofibers, poly(butylene succinate) (PBS)-based biodegradable nanocomposites were prepared. The nanocomposites were processed using a Brabender twin-screw compounder and an injection molding machine. Effects of INF… More >