MERYEM KORUYUCU^a, FEHMi SALTAN^a,b, GÖKHAN KÖK^a, HAKAN AKAT^a, YEŞIM SALMAN^a,*

Journal of Polymer Materials, Vol.36, No.3, pp. 207-216, 2019, DOI:10.32381/JPM.2019.36.03.1

Abstract The present study has demonstrated that novel acrylic glycopolymers are successfully prepared by using monosaccharides containing an acrylate group (9-12). For this purpose, sugar based acrylate monomers were synthesized via ring opening method (Method B) and homopolymerization of this sugar oxypropylacrylates was performed using free radical polymerization. The characterization of all the monomers and polymers were verified by ¹HNMR, ¹³CNMR, FTIR and GPC techniques. The Glass transition temperatures and thermal characteristics of the polymers were also analyzed by using DSC and TG techniques. The thermal stability of prepared polymers have changed with the stereochemistry of the carbohydrate moiety. Also, the… More >

SAURABH SAXENA^a, PRATEEK MALIK^a, GEETHA SESHADRI^a,*, AJAY K. TYAGI^a, UTTAM KUMAR MANDAL^b

Journal of Polymer Materials, Vol.36, No.1, pp. 39-51, 2019, DOI:10.32381/JPM.2019.36.01.4

Abstract Medium molecular weight liquid perfluoropolyethers (840 u to 1372 u) were synthesized by photopolymerization of hexafluoropropylene (HFP) in the presence of oxygen. Effects of various reaction parameters such as temperature, pressure, UV wattage and reaction time on yield, viscosity and molecular weight of PFPEs were studied. Out of all the parameters, the effect of reaction temperature was found the most significant on molecular weight of PFPEs. By increasing reaction temperature, viscosity and molecular weight of PFPEs where decreased. By increasing the wattage of the lamp, viscosity and molecular weight of PFPEs where also decreased. PFPEs obtained from reactions were subjected… More >

RAFAT SABA^*, MOHD. KASHIF AZIZ, GHULAM MUSTAFA, ARPIT SRIVASTAVA, SHEKHAR SRIVASTAVA^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 153-166, 2021, DOI:10.32381/JPM.2021.38.1-2.12

Abstract We have synthesized Schiff’s base of Fe₃ O₄ @chitosan with 4,4'-diselenobisbenzaldehyde (Fe₃O₄ @CSSe) composite and used it as acatalyst for the oxidation of sulfides, having some advantageous properties such as eco-friendly, cost-effective and highly efficient magnetic biocatalyst of selenium. The synthesized schiff’s base was characterized by different physical characterization techniques such as Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Vibrating sample magnetometer (VSM)and Dynamic light scattering (DLS). Further, we used the resulting schiff’s base as a catalyst in the presence of a green oxidant (H₂ O₂ ) to oxidize sulfides to corresponding sulfoxides at room temperature. It has been… More >

JALPA V. CHOPDA, DHARMESH B. SANKHAVARA, JIGNESH P. PATEL, P. H. PARSANIA^*

Journal of Polymer Materials, Vol.38, No.1-2, pp. 35-48, 2021, DOI:10.32381/JPM.2021.38.1-2.4

Abstract Conventional curing study of epoxy resin of (2E, 6E)-bis (4-hydroxybenzylidene)-4-methyl cyclohexanone (EMBHBC) was conducted at 140 0 /150 0 C by using 4,4’-diaminodiphenylmethane (DDM),4,4’-diaminodiphenylsulphone (DDS),4-4’-diaminodiphenyl ether (DDE), p-phenylenediamine (PDA), 1,2,3,6-tetrahydrophthalic anhydride(THPA), maleic anhydride (MAH) and pyromellitic dianhydride (PMDA). The gel time for DDS, THPA and DDM hardeners are found considerably longer than those of DDE, PDA, MAH and PMDA systems indicated different reactivity towards curing of EMBHBC. Sol–gel analysis of cured resins was carried out in DMF at room temperature. Diamines cured samples showed 76.3-97.5% gel fractions, while anhydrides cured samples showed 84.6-99.6% gel fractions. DDM, PDA and THPA are… More >

S.R. MANE^1,2, E. K. PATHAN³, G. PATIL⁴, S. G. TUPE⁵, V. GHORMADE⁴, B. P. CHAUDHARI^1,2, M.V. DESHPANDE^5,*

Journal of Polymer Materials, Vol.38, No.3-4, pp. 219-230, 2021, DOI:10.32381/JPM.2021.38.3-4.4

Abstract A dimorphic fungus Benjaminiella poitrasii contains high chitin/chitosan (35% of the cell wall) in the mycelial (M) form than its yeast (Y) form (20% of the cell wall). However, the relative proportion of chitosan is more in yeast form cells (chitosan: chitin ratio, 6:1) than mycelial cells (chitosan: chitin ratio, 3:1). Using the Taguchi design of experimental (DOE) approach, interactions among eight different parameters showed that carbon source (starch, 10 g/L), incubation time (48 h), inoculum (M and Y mixed 10%), yeast extract (6 g/L) and peptone (10 g/L), were optimum for maximum biomass production. Under these conditions, the chitosan… More >

PETR SYSEL¹, ROMAN HOLAKOVSKݲ, ŠTĚPÁN HOVORKA³, JAROSLAV Ž ÁDNÝ⁴, PAVEL IZÁK⁴

Journal of Polymer Materials, Vol.39, No.3-4, pp. 325-335, 2022, DOI:10.32381/JPM.2022.39.3-4.10

Abstract Linear polyimides based on both of the 2,2´-diamino-1,1´-binaphthalene enantiomers and their racemic mixture were synthesized and characterized. A two-step synthetic route, consisting of the preparation of the polyimide precursor followed by its thermal imidization at temperatures not exceeding 200°C, was employed. The products were analyzed by FTIR and ¹ H NMR spectroscopy. All of the tested materials were nearly fully imidized after 25 h. The final polyimides possess high glass transition temperatures, are thermo-oxidatively stable and are soluble in common organic solvents as 1-methyl-2-pyrrolidone, tetrahydrofuran and chloroform; additionally, those prepared from the enantiomers show optical activity. The values of specific… More >

S. MATHIVANAN^*, R. MOHAN, RAMES C PANDA, P. BALACHANDER¹

Journal of Polymer Materials, Vol.39, No.3-4, pp. 195-204, 2022, DOI:10.32381/JPM.2022.39.3-4.2

Abstract Optimum-designed footwear with polyurethane (PU) material for comfort is an important requirement for obese. Investigations on compressive behavior of varied designed footwear using 120 D PU material have been carried out. The energy absorption primarily depends on heel height, slope angle and load applied or body mass index of obese. Statistical analysis has been used to formulate the prediction of absorbed energy wherein a heel height of 30 mm with 20-degree angle provides optimum value with the incorporation of 120 D PU material. A coefficientof-determination (R² ) value of 0.9406 confirms the suitability of the statistical regression model. Hence, the… More >

Lujuan Deng, Ruochong Fu^*, Zuhe Li, Boyi Liu, Mengze Xue, Yuhao Cui

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 4071-4089, 2024, DOI:10.32604/cmc.2024.048200

Abstract Multispectral pedestrian detection technology leverages infrared images to provide reliable information for visible light images, demonstrating significant advantages in low-light conditions and background occlusion scenarios. However, while continuously improving cross-modal feature extraction and fusion, ensuring the model’s detection speed is also a challenging issue. We have devised a deep learning network model for cross-modal pedestrian detection based on Resnet50, aiming to focus on more reliable features and enhance the model’s detection efficiency. This model employs a spatial attention mechanism to reweight the input visible light and infrared image data, enhancing the model’s focus on different spatial positions and sharing the… More >

Rashmi Sharma¹, Ashok Pal¹, Nitin Mittal², Lalit Kumar², Sreypov Van³, Yunyoung Nam^3,*, Mohamed Abouhawwash^4,5

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 3489-3510, 2024, DOI:10.32604/cmc.2024.046606

Abstract This study proposes a hybridization of two efficient algorithm’s Multi-objective Ant Lion Optimizer Algorithm (MOALO) which is a multi-objective enhanced version of the Ant Lion Optimizer Algorithm (ALO) and the Genetic Algorithm (GA). MOALO version has been employed to address those problems containing many objectives and an archive has been employed for retaining the non-dominated solutions. The uniqueness of the hybrid is that the operators like mutation and crossover of GA are employed in the archive to update the solutions and later those solutions go through the process of MOALO. A first-time hybrid of these algorithms is employed to solve… More >

Ekanayake Mudiyanselage Chulabhaya Lankanatha Ekanayake^1,2, Abubakar Sulaiman Gezawa^3,*, Yunqi Lei¹

CMC-Computers, Materials & Continua, Vol.78, No.3, pp. 2941-2965, 2024, DOI:10.32604/cmc.2024.046155

Abstract Video description generates natural language sentences that describe the subject, verb, and objects of the targeted Video. The video description has been used to help visually impaired people to understand the content. It is also playing an essential role in devolving human-robot interaction. The dense video description is more difficult when compared with simple Video captioning because of the object’s interactions and event overlapping. Deep learning is changing the shape of computer vision (CV) technologies and natural language processing (NLP). There are hundreds of deep learning models, datasets, and evaluations that can improve the gaps in current research. This article… More >