Pranav S. Sapkal^1,*, Abhaykumar M. Kuthe¹, Shantanu Mathankar², Akash A. Deshmukh

Molecular & Cellular Biomechanics, Vol.14, No.2, pp. 125-136, 2017, DOI:10.3970/mcb.2017.014.123

Abstract β-TCP-Zirconia scaffolds with different architectures were fabricated by means of 3D-Bioplotting in order to enhance the mechanical and in-vitro ability of the scaffold to heal large size bone defects. In the present study scaffold architecture with different strand orientations (0°-90°, 0°-45°-135°-180°, 0°-108°-216° and 0°-72°-144°-36°-108°) were fabricated, characterized and evaluated for mechanical strength and cell proliferation ability. β-TCP powder (25 µm) and PVA (Polyvinyl Alcohol) was acquired from Fisher Scientific, India. Zirconia (18 to 32 µm) was procured from Lobachemie, India. In brief 7.5%, PVA in distilled water was used as a binder and was mixed with 10 grams of (70/30)… More >

B. Yang², V. K. Tewary³

CMES-Computer Modeling in Engineering & Sciences, Vol.15, No.3, pp. 165-178, 2006, DOI:10.3970/cmes.2006.015.165

Abstract Green's function (GF) modeling of defects may take effect only if the GF as well as its various integrals over a line, a surface and/or a volume can be efficiently evaluated. The GF is needed in modeling a point defect, while integrals are needed in modeling line, surface and volumetric defects. In a matrix of multilayered, generally anisotropic and linearly elastic and piezoelectric materials, the GF has been derived by applying 2D Fourier transforms and the Stroh formalism. Its use involves another two dimensions of integration in the Fourier inverse transform. A semi-analytical scheme has been developed previously for efficient… More >

Radek Pecher¹, Steve Elston, Peter Raynes

CMES-Computer Modeling in Engineering & Sciences, Vol.13, No.2, pp. 91-102, 2006, DOI:10.3970/cmes.2006.013.091

Abstract Meshfree techniques for solving partial differential equations in physics and engineering are a powerful new alternative to the traditional mesh-based techniques, such as the finite difference method or the finite element method. The elimination of the domain mesh enables, among other benefits, more efficient solutions of nonlinear and multi-scale problems. One particular example of these kinds of problems is a Q-tensor based model of nematic liquid crystals involving topological defects.
This paper presents the first application of the meshless local Petrov-Galerkin method to solving the Q-tensor equations of nematostatics. The theoretical part introduces the Landau -- de Gennes free-energy… More >

H.F. Zhan, Y.T. Gu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.80, No.1, pp. 23-56, 2011, DOI:10.3970/cmes.2011.080.023

Abstract Based on the embedded atom method (EAM) and molecular dynamics (MD) method, in this paper, the tensile deformation properties of Cu nanowires (NWs) with different pre-existing defects, including single surface defects, surface bi-defects and single internal defects, are systematically studied. In-depth deformation mechanisms of NWs with pre-existing defects are also explored. It is found that Young's modulus is insensitive to different pre-existing defects, but yield strength shows an obvious decrease. Defects are observed influencing greatly on NWs' tensile deformation mechanisms, and playing a role of dislocation sources. Besides of the traditional deformation process dominated by the nucleation and propagation of… More >

E. Kuramoto, K. Ohsawa, T. Tsutsumi¹

CMES-Computer Modeling in Engineering & Sciences, Vol.3, No.2, pp. 193-200, 2002, DOI:10.3970/cmes.2002.003.193

Abstract In order to investigate the interaction of point defects with a dislocation, an interstitial cluster or a SFT (stacking fault tetrahedron), computer simulation has been carried out in model Fe and Ni crystals. The capture zone (the region where the interaction energy is larger than kT) was determined for various interactions. Calculated capture zone for T =500°C for SIAs (crowdion and dumbbell) around a straight edge dislocation is larger than that for a vacancy in both Fe and Ni. Capture zones for Ni are larger than those for Fe, suggesting that Ni (fcc) has a larger dislocation bias factor than… More >

Ou Zhang^1,*, Xueye Wei¹

CMC-Computers, Materials & Continua, Vol.58, No.2, pp. 529-544, 2019, DOI:10.32604/cmc.2019.04075

Abstract Aiming at the detection of the sucker rod defects, a real-time detection system is designed using the non-destructive testing technology of magnetic flux leakage (MFL). An MFL measurement system consists of many parts, and this study focuses on the signal acquisition and processing system. First of all, this paper introduces the hardware part of the acquisition system in detail, including the selection of the Hall-effect sensor, the design of the signal conditioning circuit, and the working process of the single chip computer (SCM) control serial port. Based on LabVIEW, a graphical programming software, the software part of the acquisition system… More >

M. Chang^1,2,3, Y. C. Chou^1,2, P. T. Lin^1,2, J. L. Gabayno^2,4

CMC-Computers, Materials & Continua, Vol.42, No.2, pp. 125-140, 2014, DOI:10.3970/cmc.2014.042.125

Abstract Automated optical inspection systems installed in production lines help ensure high throughput by speeding up inspection of defects that are otherwise difficult to detect using the naked eye. However, depending on the size and surface properties of the products such as micro-cracks on touchscreen panels glass cover, the detection speed and accuracy are limited by the imaging module and lighting technique. Therefore the current inspection methods are still delegated to a few qualified personnel whose limited capacity has been a huge tradeoff for high volume production. In this study, an automated optical technology for in-line surface defect inspection is developed… More >