Yanbin Wang^1,2, Deli Gao¹, Jun Fang¹

CMC-Computers, Materials & Continua, Vol.48, No.1, pp. 57-75, 2015, DOI:10.3970/cmc.2015.048.057

Abstract In this paper, the mechanical model to analyze the riser lateral vibration displacement and stress distribution in installation has been established via variational approach and the principle of minimum potential energy. In this model, the influence of vessel motion on riser lateral vibration has been taken into consideration. The specific expression of lateral vibration has also been figured out according to the boundary conditions and initial conditions. At last, the variations of riser maximum lateral displacement and stress distribution on water depth (WD), wave height, wave period, riser OD, BOPS weight have been discussed. More >

CMC-Computers, Materials & Continua, Vol.47, No.3, pp. 179-201, 2015, DOI:10.3970/cmc.2015.047.179

Abstract Discontinuous smoothed particle hydrodynamics (DSPH) method based on traditional SPH method, which can be used to simulate discontinuous physics problems near interface or boundary. Previous works showed that DSPH method has a good application prospect [Xu et al, 2013], but further verification and improvement are demanded. In this paper, we investigate the accuracy of DSPH method by some numerical models. Moreover, to improve the accuracy of DSPH method, first order and second order multidimensional RDSPH methods are proposed by following the idea of restoring particle consistency in SPH (RSPH) method which has shown good results in the improvement of particle… More >

Bui Duc Thuan^1,2, Wong Yonghui², Chua Kian Jon², Ng Kim Choon²

CMC-Computers, Materials & Continua, Vol.47, No.2, pp. 89-105, 2015, DOI:10.3970/cmc.2015.047.089

Abstract The cup method and dynamic moisture permeation cell (DMPC) method are two common techniques used to determine the water vapor permeation properties of a membrane. Often, ignoring the resistance of boundary air layers to the transport of water vapor results in the water vapor permeance of the membrane being underestimated in practical tests. The measurement errors are higher with highly permeable membranes. In this study, the two methods were simulated using COMSOL Multiphysics platform and the extent of the error was evaluated. Initial results showed that the error is equally high in both methods. With the correction for the still… More >

Qifeng Fan¹, Yaping Zhang², Leiting Dong^1,3, Shu Li¹, Satya N. Atluri⁴

CMC-Computers, Materials & Continua, Vol.47, No.2, pp. 65-88, 2015, DOI:10.3970/cmc.2015.047.065

Abstract A very simple displacement-based hexahedral 32-node element (denoted as DPH32), with over-integration in the thickness direction, is developed in this paper for static and dynamic analyses of laminated composite plates and shells. In contrast to higher-order or layer-wise higher-order plate and shell theories which are widely popularized in the current literature, the proposed method does not develop specific theories of plates and shells with postulated kinematic assumptions, but simply uses the theory of 3-D solid mechanics and the widely-available solid elements. Over-integration is used to evaluate the element stiffness matrices of laminated structures with an arbitrary number of laminae, while… More >

C. F. Chen¹, H. Y. Li¹, C. W. Hong^1,2

CMC-Computers, Materials & Continua, Vol.46, No.3, pp. 145-163, 2015, DOI:10.3970/cmc.2015.046.145

Abstract The purpose of this research is to improve the discharge rate and to predict the melting point of high-temperature molten-salt electrolytes in thermal batteries. Using molecular dynamics (MD) simulation techniques, we tried to develop some novel ternary and quaternary molten electrolytes to replace conventional binary LiCl-KCl ones. The simulation results with greater ionic conductivity and lower melting point are consistent with experimental results reported by previous literatures. The MD results have found that the lithium ion mole fraction in the molten-salt electrolytes affects the ionic conductivity significantly. This paper demonstrates that MD simulation techniques are a useful tool to screen… More >

Al-Bahkali Essam¹, Souli Mhamed², Al-Bahkali Thamar¹

CMC-Computers, Materials & Continua, Vol.46, No.1, pp. 57-78, 2015, DOI:10.3970/cmc.2015.046.057

Abstract Simulation of hydrodynamic impact problems and its effect on surrounding structures, can be considered as a fluid structure coupling problem. The application is mainly used in automotive and aerospace engineering and also in civil engineering. Classical FEM and Finite Volume methods were the main formulations used by engineers to solve these problems. For the last decades, new formulations have been developed for fluid structure coupling applications using mesh free methods as SPH method, (Smooth Particle Hydrodynamic) and DEM (Discrete Element Method). Up to these days very little has been done to compare different methods and assess which one would be… More >

Mohamed I. A. Othman^1,2,3, W. M. Hasona^2,4, Nehal T. Mansour^2,5

CMC-Computers, Materials & Continua, Vol.45, No.3, pp. 203-220, 2015, DOI:10.3970/cmc.2015.045.203

Abstract The problem of the generalized thermoelastic medium for three different theories under the effect of a gravitational field is investigated. The Lord- Shulman, Green-Naghdi III, three-phase-lag theories are discussed with twotemperature. The normal mode analysis is used to obtain the analytical expressions of the displacement components, force stress, thermodynamic temperature and conductive temperature. The numerical results are given and presented graphically, when the thermal force is applied. Comparisons are made with the results predicted by three-phase-lag model, Green-Naghdi III and Lord-Shulman theories in the presence and absence of gravity as well as two temperature. More >

S.D. Akbarov^1,2, M.I. Ismailov³

CMC-Computers, Materials & Continua, Vol.45, No.2, pp. 75-106, 2015, DOI:10.3970/cmc.2015.045.075

Abstract The subject of the paper is the study of the dynamics of the moving load acting on the hydro-elastic system consisting of the elastic plate, compressible viscous fluid and rigid wall. Under this study the motion of the plate is described by linear elastodynamics, and the motion of the compressible viscous fluid is described by the linearized Navier-Stokes equations. Numerical results are obtained for the case where the material of the plate is steel, but the fluid material is Glycerin. According to these results, corresponding conclusions related to the influence of the problem parameters, such as fluid viscosity, plate thickness,… More >

G. Q. Xie^1,2, M. X. Chi¹

CMC-Computers, Materials & Continua, Vol.44, No.2, pp. 123-140, 2014, DOI:10.3970/cmc.2014.044.123

Abstract Dynamic response sensitivity of a simply supported functionally graded magneto-electro-elastic plates have been studied by combining analytical method with finite element method. The functionally graded material parameters are assumed to obey exponential law in the thickness direction. A series solution of double trigonometric function agreed with the simply supported boundary condition is adopted in the plane of the plate and finite element method is used across the thickness of the plate. The finite element model is established based on energy variational principle. The coupled electromagnetic dynamic characteristics of a simply supported functionally graded magneto- electro-elastic plate are decided by its… More >

K.B. Mustapha ^1,2

CMC-Computers, Materials & Continua, Vol.42, No.2, pp. 141-174, 2014, DOI:10.3970/cmc.2014.042.141

Abstract This study investigates the sensitivity of the flexural response of a ribconnected system of coupled micro-panels with traction-free surfaces. Idealized as a two-dimensional elastic continuum with a finite transverse stiffness, each micropanels’ behavior is examined within the framework of the biharmonic mathematical model derived from the higher-order, size-dependent strain energy formulation. The model incorporates the material length scale, which bears an associative relationship with the underlying polymer’s averaged Frank elastic constant. Upper estimates of the eigenvalue of the system, under fully clamped edges and simplysupported edges, are determined by the Rayleigh method. The adopted theory for the micro-panel’s behavior takes… More >