J. Ghanbari¹, R. Naghdabadi^1,2

CMC-Computers, Materials & Continua, Vol.10, No.1, pp. 41-64, 2009, DOI:10.3970/cmc.2009.010.041

Abstract Continuum-based modeling of nanostructures is an efficient and suitable method to study the behavior of these structures when the deformation can be considered homogeneous. This paper is concerned about multiscale nonlinear tensorial constitutive modeling of carbon nanostructures based on the interatomic potentials. The proposed constitutive model is a tensorial equation relating the second Piola-Kirchhoff stress tensor to Green-Lagrange strain tensor. For carbon nanotubes, some modifications are made on the planar representative volume element (RVE) to account for the curved atomic structure resulting a non-planar RVE. Using the proposed constitutive model, the elastic behavior of the graphene sheet and carbon nanotube… More >

S. Straface¹, S. Troisi, V. Gagliardi

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 155-166, 2006, DOI:10.3970/cmc.2006.003.155

Abstract The present work shows an alternative to the classical methods to solve the Richards' Equation (RE), used to model flow in unsaturated porous media. This alternative is named Cell Method (CM). The CM is based on a preliminary reformulation of the mathematical model in a partially discrete form, which preserves as much as possible the physical and geometrical content of the original problem, and is made possible by the existence and properties of a common mathematical structure of field theories. The goal is to maintain the focus, both in the modelling and discretization steps, on the physics of the problem.… More >

T. Nishioka¹, S. Tchouikov¹, T. Fujimoto¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 147-154, 2006, DOI:10.3970/cmc.2006.003.147

Abstract In this study, phenomena of multiple branching of dynamically propagating crack are investigated numerically. The complicated paths of cracks propagating in a material are simulated by moving finite element method based on Delaunay automatic triangulation (MFEM BODAT), which was extended for such problems. For evaluation of fracture parameters for propagating and branching cracks switching method of the path independent dynamic J integral was used. Using these techniques the generation phase simulation of multiple dynamic crack branching was performed. Various dynamic fracture parameters, which are almost impossible to obtain by experimental technique alone, were accurately evaluated. More >

G. Haasemann¹, M. Kästner¹ and V. Ulbricht¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 131-146, 2006, DOI:10.3970/cmc.2006.003.131

Abstract Novel textile reinforced composites provide an extremely high adaptability and allow for the development of materials whose features can be adjusted precisely to certain applications. A successful structural and material design process requires an integrated simulation of the material behavior, the estimation of the effective properties which need to be assigned to the macroscopic model and the resulting features of the component. In this context two efficient modelling strategies - the Binary Model (Carter, Cox, and Fleck (1994)) and the Extended Finite Element Method (X-FEM) (Moës, Cloirec, Cartraud, and Remacle (2003)) - are used to model materials which exhibit a… More >

X.G. Yuan¹, R.J. Zhang²

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 119-130, 2006, DOI:10.3970/cmc.2006.003.119

Abstract In this paper, the problem of cavity formation and motion in an incompressible transversely isotropic nonlinearly elastic solid sphere, which is subjected to a uniform radial tensile dead load on its surface, is examined in the context of nonlinear elastodynamics. The strain energy density associated with the nonlinearly elastic material may be viewed as the generalized forms of some known material models. It is proved that some determinate conditions must be imposed on the form of the strain energy density such that the surface tensile dead load has a finite critical value. Correspondingly, as the surface tensile dead load exceeds… More >

Hamid Sharifi¹ and Augustin Gakwaya¹

CMC-Computers, Materials & Continua, Vol.3, No.2, pp. 77-96, 2006, DOI:10.3970/cmc.2006.003.077

Abstract In this paper, an object-oriented modeling of solid material constitutive behavior using the UML notation is presented. Material properties are first classified into large and small deformation kinematical models. In the small deformation package, we keep classes such as Elastic, ElastoPlastic, ViscoElastic and ViscoPlastic. In the large deformation package, we store classes such as ElastoPlastic, HyperElastic, HyperPlastic, HyperViscoElastic, HyperViscoPlastic and so on. The hierarchical structure, the association relationships as well as key attributes and methods of these classes are presented. We used a C++ implementation of the above model for developing HyperElastic, HyperElastoPlastic and Contact applications in the Diffpack environment. More >

Shen Yubin¹, Xie Huicai^1,2, Den Wei¹

CMC-Computers, Materials & Continua, Vol.3, No.2, pp. 49-54, 2006, DOI:10.3970/cmc.2006.003.049

Abstract Bonding an overlay of new concrete onto the damaged concrete is a usual repair method. Because of the different shrinkage rate of the new and old concrete, restrained shrinkage cracks will appear in the new concrete. The cracks will reduce durability and strength of the repaired structure. A new repair method using an interface layer of carbon fiber reinforced cement mortar between new and old concrete was developed in this paper. The new method was found to be very effective in reducing shrinkage cracking of repaired beams and slabs. Comparing with normal repaired beams, the maximum observed width of the… More >

I. Smojver¹, J. Sorić²

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 13-24, 2006, DOI:10.3970/cmc.2007.003.013

Abstract The paper addresses the problem of impact on layered fibre composites. The behaviour of composite laminates under impact loading is dependent not only on the velocity but also on the mass and geometry of the impactor. Using micromechanical Mori-Tanaka approach, mechanical properties of the laminate have been calculated utilizing the material constants of the fibre and matrix. General purpose FEM software ABAQUS has been modified by means of user written subroutines for modelling of composite laminate and rigid impactor. The kinematics of the impact has been simulated using transient dynamic analysis. Employing user defined multi point constraints, delamination zones have… More >

Aimin Jiang^1,2, Haojiang Ding²

CMC-Computers, Materials & Continua, Vol.3, No.1, pp. 1-12, 2006, DOI:10.3970/cmc.2007.003.001

Abstract This paper presents a development of the boundary contour method (BCM) for magneto-electro-elastic media. Firstly, the divergence-free of the integrand of the magneto- electro-elastic boundary element is proved. Secondly, the boundary contour method formulations are obtained by introducing linear shape functions and Green's functions (Computers & Structures, 82(2004):1599-1607) for magneto-electro-elastic media and using the rigid body motion solution to regularize the BCM and avoid computation of the corner tensor. The BCM is applied to the problem of magneto-electro-elastic media. Finally, numerical solutions for illustrative examples are compared with exact ones and those of the conventional boundary element method (BEM). The… More >

Carlos J. S. Alves, Pedro R. S. Antunes¹

CMC-Computers, Materials & Continua, Vol.2, No.4, pp. 251-266, 2005, DOI:10.3970/cmc.2005.002.251

Abstract In this work we show the application of the Method of Fundamental Solutions(MFS) in the determination of eigenfrequencies and eigenmodes associated to wave scattering problems. This meshless method was already applied to simple geometry domains with Dirichlet boundary conditions (cf. Karageorghis (2001)) and to multiply connected domains (cf. Chen, Chang, Chen, and Chen (2005)). Here we show that a particular choice of point-sourcescan lead to very good results for a fairly general type of domains. Simulations with Neumann boundary conditionare also considered. More >