Chen X.Y.^∗,†, Liu Y.^2,‡, Fu B.M.^§, Fan J.T.^¶, Yang J.M.¹

Molecular & Cellular Biomechanics, Vol.5, No.4, pp. 275-284, 2008, DOI:10.3970/mcb.2008.005.275

Abstract Surface glycocalyx, as a barrier to material exchange between circulating blood and body tissues, can be treated as a periodic square array of cylindrical fibers. Previous study treated the glycocalyx as porous media and simulated by continuum theory. However, it has recently been found that a relatively hexagonal fibre-matrix structure may be responsible for the ultrafiltration properties of microvascular walls. The fibre-matrix is an underlaying three-dimensional meshwork with a fibre diameter of 10$\sim$12 nm and characteristic spacing of about 20 nm. The porous medium model does not consider the particle size, when the particle size is comparable to the fibre… More >

Dalin Tang^*, Chun Yang^†, Tal Geva^‡,§, Pedro J. del Nido^¶

Molecular & Cellular Biomechanics, Vol.4, No.3, pp. 159-176, 2007, DOI:10.3970/mcb.2007.004.159

Abstract A single-layer isotropic patient-specific right/left ventricle and patch (RV/LV/Patch) combination model with fluid-structure interactions (FSI) was introduced in our previous papers to evaluate and optimize human pulmonary valve replacement/insertion (PVR) surgical procedure and patch design. In this paper, an active anisotropic model with two-layer structure for ventricle wall and tissue fiber orientation was introduced to improve previous isotropic model for more accurate assessment of RV function and potential application in PVR surgery and patch design. A material-stiffening approach was used to model active heart contraction. The computational models were used to conduct ``virtual (computational)'' surgeries and test the hypothesis that… More >

J. S. Ren^*

Molecular & Cellular Biomechanics, Vol.4, No.1, pp. 55-66, 2007, DOI:10.3970/mcb.2007.004.055

Abstract Formation and rupture of aneurysms due to the inflation of an artery with collagen fibers distributed in two preferred directions, subjected to internal pressure and axial stretch are examined within the framework of nonlinear elasticity. A two layer tube model with a fiber-reinforced composite based incompressible anisotropic hyperelastic constitutive material is employed to model the stress-strain behavior of the artery wall with distributed collagen fibers. The artery wall takes up a uniform inflation deformation, and there are no aneurysms in the artery under the normal condition. But an aneurysm may be formed in arteries when the stiffness of the fibers… More >

Hiroshi Yamada^∗,†, Hirokazu Ando^†

Molecular & Cellular Biomechanics, Vol.4, No.1, pp. 1-12, 2007, DOI:10.3970/mcb.2007.004.001

Abstract We investigated the response of apical and basal actin stress fibers (SFs) and its dependency on cell confluency for endothelial cells subjected to cyclic stretching. Porcine aortic endothelial cells from the 2^nd and 5^th passages were transferred to a fibronectin-coated silicone chamber with 5000–8000 cells/cm²(isolated condition), positioning the cells apart, or with 25,000–27,000 cells/cm²(subconfluent condition), allowing cell-to-cell contact. The substrate was stretched cyclically by 0.5 Hz for 2 h with a peak strain on the substrate that was 15% in the stretch direction and –4% in the transverse direction. The actin filaments (AFs) were stained with rhodamine phalloidin and their… More >

Dhanjoo N. Ghista^1,2, Liang Zhong², Leok P.Chua², Eddie Y-K Ng², Soo T.Lim³, Ru S. Tan³, TerranceS-J Chua³

Molecular & Cellular Biomechanics, Vol.2, No.4, pp. 217-234, 2005, DOI:10.3970/mcb.2005.002.217

Abstract Background: In this paper, the left ventricle (LV) is modeled as a cylinder with myocardial fibers located helically within its wall. A fiber is modeled into myocardial structural units (MSUs); the core entity of each MSU is the sarcomeric contractile element. The relationship between the sarcomere unit's contractile force and shortening velocity is expressed in terms of the LV model's wall stress and deformation, and hence in terms of the monitored LV pressure and volume. Then, the LV systolic performance is investigated in terms of a mechatronic (excitation-contraction) model of the sarcomere unit located within the LV cylindrical model wall.… More >

S. Deguchi^1,2, T. Ohashi², M. Sato²

Molecular & Cellular Biomechanics, Vol.2, No.4, pp. 205-216, 2005, DOI:10.3970/mcb.2005.002.205

Abstract Intracellular stress transmission through subcellular structural components has been proposed to affect activation of localized mechano-sensing sites such as focal adhesions in adherent cells. Previous studies reported that physiological extracellular forces produced heterogeneous spatial distributions of cytoplasmic strain. However, mechanical signaling pathway involved in intracellular force transmission through basal actin stress fibers (SFs), a mechano-responsive cytoskeletal structure, remains elusive. In the present study, we investigated force balance within the basal SFs of cultured smooth muscle cells and endothelial cells by (i) removing the cell membrane and cytoplasmic constituents except for materials physically attaching to the substrate (i.e., SF--focal adhesion complexities)… More >

S. Deguchi^1,2, T. Ohashi², M. Sato²

Molecular & Cellular Biomechanics, Vol.2, No.3, pp. 125-134, 2005, DOI:10.3970/mcb.2005.002.125

Abstract Actin bundles in vascular endothelial cells (ECs) play a critical role in transmitting intracellular forces between separate focal adhesion sites. However, quantitative descriptions of tension level in single actin bundles in a physiological condition are still poorly studied. Here, we evaluated magnitude of preexisting tension in a single actin bundle of ECs on the basis of measurements of its preexisting stretching strain and tensile properties. Cultured ECs expressing fluorescently-labeled actin were treated with detergents to extract acin bundles. One end of an actin bundle was then dislodged from the substrate by using a microneedle, resulting in a shortening of the… More >

Yunfa Zhang¹, Zihui Xia^1,2

CMC-Computers, Materials & Continua, Vol.2, No.3, pp. 213-226, 2005, DOI:10.3970/cmc.2005.002.213

Abstract In the present study, the initiation and evolution of the interphase damage and their influences on the global stress-strain relation of composite laminates are predicted by finite element analysis on a micromechanical unit cell model. A thin layer of interphase elements is introduced and its stress-strain relation is derived based on a cohesive law which describes both normal and tangential separations at the interface between the fiber and matrix. In addition, a viscous term is added to the cohesive law to overcome the convergence difficulty induced by the so-called snap-back instability in the numerical analysis. The matrix behavior is described… More >

Kunigal Shivakumar¹, Anil Bhargava²

CMC-Computers, Materials & Continua, Vol.1, No.2, pp. 173-190, 2004, DOI:10.3970/cmc.2004.001.173

Abstract The fiber optic sensor (FOS) embedded perpendicular to reinforcing fibers causes an `Eye' shaped defect. The length is about 16 times fiber optic radius (R_Fos) and height is about 2R_Fos. The eye contains fiber optics in the center surrounded by an elongated resin pocket. Embedding FOS causes geometric distortion of the reinforcing fiber over a height equal to 6 to 8 R_Fos. This defect causes severe stress concentration at the root of the resin pocket, the interface (in the composite) between the optical fiber and the composite, and at 90° to load direction in the composite. The stress concentration was… More >

Ricardo Perera¹

CMC-Computers, Materials & Continua, Vol.1, No.2, pp. 153-172, 2004, DOI:10.3970/cmc.2004.001.153

Abstract Epoxy-bonding a composite plate to the tension face is an effective technique to repair reinforced concrete beams since it increases their strength and rigidity. In this paper, the structural behavior of reinforced concrete beams with fibre reinforced polymer (FRP) plates is studied numerically. For it, a numerical damage model is used in order to predict their strength, stiffness and failure modes observed in experimental tests taking into account the influence of different variables such as the amount of steel reinforcement, the type and amount of external reinforcement, the plate length, etc. The consideration of concrete cracking and the yielding of… More >