Jithin Joy^1,2,3, Cintil Jose³, Srirama B. Varanasi⁴, Lovely Mathew P.^2,3, Sabu Thomas², Srikanth Pilla^1,5*

Journal of Renewable Materials, Vol.4, No.5, pp. 351-364, 2016, DOI:10.7569/JRM.2016.634128

Abstract Isora nanofibers (INF) were produced by a combined thermal-chemical-mechanical method from Helicteres isora plant. The resulting fibers were analyzed using transmission electron microscopy and scanning electron microscopy, which showed a network-like structure with a length of 600 nm, width of 50 nm and an aspect ratio of 12. Fourier transform infrared spectroscopy indicated that chemical treatments progressively removed noncellulosic constituents. X-ray diffraction analysis revealed that crystallinity increased with successive chemical treatments. Using the synthesized isora nanofibers, poly(butylene succinate) (PBS)-based biodegradable nanocomposites were prepared. The nanocomposites were processed using a Brabender twin-screw compounder and an injection molding machine. Effects of INF… More >

Craig Clemons

Journal of Renewable Materials, Vol.4, No.5, pp. 327-339, 2016, DOI:10.7569/JRM.2016.634112

Abstract Continuous fibers are commonly manufactured for a wide variety of uses such as filters, textiles, and composites. For example, most fibrous reinforcements (e.g., carbon fiber, glass fiber) for advanced composites are continuous fibers or yarns, fabrics, and preforms made from them. This allows broad flexibility in design and manufacturing approaches by controlling fiber orientation and architecture. However, there has been growing interest in preparing continuous fibers from biobased materials such as plants. Of particular recent interest are nanocelluloses, which are projected to be less expensive than many other nanomaterials and have the potential to be produced in large volumes. They… More >

Evelien Uitterhaegen^1,2, Quang Hung Nguyen^1,2, Othmane Merah^1,2, Christian V. Stevens³, Thierry Talou^1,2, Luc Rigal^1,2, Philippe Evon^1,2*

Journal of Renewable Materials, Vol.4, No.3, pp. 225-238, 2016, DOI:10.7569/JRM.2015.634120

Abstract New fiberboards were manufactured from a coriander cake through thermo-pressing, and the influence of thermo-pressing conditions (temperature, pressure and time) on the boards’ mechanical properties, their thickness swelling and their water absorption was evaluated. Because the protein glass transition systematically occurred during molding, this resulted in effective wetting of the fibers. Consequently, all boards were cohesive, with proteins and fibers acting as binder and reinforcing fillers, respectively. Flexural properties were influenced by all tested conditions, and the optimal board was molded at 200 °C temperature, 36.8 MPa pressure and 180 s time. Its flexural strength at break and its elastic… More >

Arunjunairaj Mahendran^1*, Günter Wuzella¹, Thomas Hardt-Stremayr¹, Wolfgang Gindl-Altmutter²

Journal of Renewable Materials, Vol.4, No.3, pp. 215-224, 2016, DOI:10.7569/JRM.2016.634110

Abstract Woven natural fiber-reinforced composites were fabricated using four different flax fabrics and two biobased epoxy resin matrices. The reinforced composites were prepared using resin infusion technique and fiber volume fractions of between 28–35% were achieved using this method. The fiber matrix interaction and the failure mechanism in the composite were observed using scanning electron microscopy. The flexural strength and modulus on the warp and weft directions were characterized and it was found that based on yarn count and yarn thickness change in the flexural strength was observed. Dynamic water absorption and thickness swelling were observed for a certain period of… More >

Estefanía Lidón Sánchez-Safont¹, Jennifer González-Ausejo¹, José Gámez-Pérez¹, José María Lagarón², Luis Cabedo^1*

Journal of Renewable Materials, Vol.4, No.2, pp. 123-132, 2016, DOI:10.7569/JRM.2015.634127

Abstract Novel biodegradable composites based on poly(3-hydroxybutirate-co-3-hydroxyvalerate) (PHBV) and different contents of purifi ed alpha-cellulose fi bers (3, 10, 25 and 45%) were prepared by melt blending and characterized. The composites were characterized by scanning electron microscopy (SEM), wide-angle X-ray scattering (WAXS) experiments, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanic analysis (DMA) and Shore D hardness measurements. Disintegrability under composting conditions was studied according to the ISO 20200 standard. Morphological results showed that high dispersion of the fi bers was achieved during mixing. Good adhesion on the fi ber-matrix interface was also detected by SEM. The addition of low… More >

Estela Krause Sammartino^1,2,3†, María Marta Reboredo⁴, Mirta I. Aranguren^*,4

Journal of Renewable Materials, Vol.4, No.2, pp. 101-112, 2016, DOI:10.7569/JRM.2014.634144

Abstract Composites made from polypropylene (PP) and local South American fibers traditionally used in yarnderived craftsmanships, Caranday Palm, were studied regarding the effect of fiber addition, concentration and characteristics of the coupling agent (molecular weight and percentage of grafted maleic anhydride), as well as type of processing. A laboratory-scale intensive mixing followed by compression, and pilot plant twin extrusion followed by injection, were the two processes investigated. The use of the first one allowed the selection of processable formulations with high fiber concentration and a percentage of coupling agent below the surface fiber saturation. In fact, it was found that there… More >

Chetan D. Kuthe^∗, R.V. Uddanwadiker^†, Alankar Ramteke^‡

Molecular & Cellular Biomechanics, Vol.11, No.2, pp. 113-128, 2014, DOI:10.3970/mcb.2014.011.113

Abstract Biomechanical researches are essential to develop new techniques to improve the clinical relevance. Skeletal muscle generates the force which results in the motion of human body, so it is essential to study the mechanical and structural properties of skeletal muscle. Many researchers have carried out mechanical study of skeletal muscle with in-vivo testing. This work aims to examine anisotropic mechanical behavior of skeletal muscle with in vitro test (tensile test). It is important to understand the mechanical and structural behavior of skeletal muscle when it is subjected to external loading; the research aims to determine the structural properties of skeletal… More >

Syed A Jamal^*

Molecular & Cellular Biomechanics, Vol.10, No.4, pp. 267-273, 2013, DOI:10.3970/mcb.2013.010.267

Abstract Human Umbilical Cord Mesenchymal Stem Cells (hUCMSCs) were subjected to in vitro osteogenic differentiation using a novel combination of signaling molecules including BMP-2 and purmorphamine. Differentiation outcomes were assessed by calcein staining and by microscopic examination of the cytoskeleton. Calcein staining showed appreciable degree of calcium mineralization in cell culture, and changes in the morphological attributes of differentiating cells were observed vis-a-vis the actin cytoskeleton. Finally, positive calcein staining, altered cytoskeletal profile, and stress fiber formation in treated cells demonstrated, for the first time, a potentially synergistic interplay between BMP-2 and the hedgehog agonist, purmorphamine. This study lends support to… More >

Idalba A. Hidalgo A.^∗, Felipe Sojo^†, Francisco Arvelo^†, Marcos A. Sabino^∗,‡

Molecular & Cellular Biomechanics, Vol.10, No.2, pp. 85-105, 2013, DOI:10.3970/mcb.2013.010.085

Abstract The electrospinning technique is a method used to produce nano and microfibers using the influence of electrostatic forces. Porous three dimensional networks of continuous and interconnected fibers as scaffolds were obtained from a poly (lactic acid) solution. The concentration of the polymeric solution, 12.5% m/w, as well as the conditions of voltage (V=11kV) and tip-metallic collector distance (H=13cm) were established to develop these scaffolds through the electrospinning process. The characteristics of the scaffolds, such as fiber diameter, sintering and the biomimetics of the characteristics of a native extra cellular matrix were verified by Scanning Electron Microscopy (SEM). The orientation induced… More >

J.S. Ren^*

Molecular & Cellular Biomechanics, Vol.7, No.4, pp. 213-224, 2010, DOI:10.3970/mcb.2010.007.213

Abstract Dynamic analysis of an axially stretched arterial wall with collagen fibers distributed in two preferred directions under a suddenly applied constant internal pressure along with the possibility of the formation and rupture of aneurysm are examined within the framework of nonlinear dynamics. A two layer tube model with the fiber-reinforced composite-based incompressible anisotropic hyper-elastic material is employed to model the mechanical behavior of the arterial wall. The maximum amplitudes and the phase diagrams are given by numerical computation of the differential relation. It is shown that the arterial wall undergoes nonlinear periodic oscillation and no aneurysms are formed under the… More >