Chengyu Mo^1,2, Fenlin Liu^1,2, Ma Zhu^1,2,*, Gengcong Yan³, Baojun Qi^1,2, Chunfang Yang^1,2

CMC-Computers, Materials & Continua, Vol.76, No.3, pp. 2921-2936, 2023, DOI:10.32604/cmc.2023.039540

Abstract The training images with obviously different contents to the detected images will make the steganalysis model perform poorly in deep steganalysis. The existing methods try to reduce this effect by discarding some features related to image contents. Inevitably, this should lose much helpful information and cause low detection accuracy. This paper proposes an image steganalysis method based on deep content features clustering to solve this problem. Firstly, the wavelet transform is used to remove the high-frequency noise of the image, and the deep convolutional neural network is used to extract the content features of the low-frequency information of the image.… More >

Muayad M. Hasan^1,*, Firas K. Al-Zuhairi², Anfal H. Sadeq¹, Rana A. Azeez¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.11, pp. 2827-2835, 2023, DOI:10.32604/fdmp.2023.027746

Abstract Solvents are generally used to reduce the viscosity of heavy crude oil and ultimately enhance oil recovery. Recently, a new method has been introduced where nanoparticles (NPs) are exploited to induce enhanced oil recovery owing to their ability to improve the mobility ratio, dampen the interfacial tension, and alter rock wettability. This study investigated the integration of nano-alumina (Al₂O₃) NPs with an n-hexane solvent. In particular, a Brookfield viscometer has been used to measure the crude oil viscosity and it has been found that NPs can effectively lead to a significant decrease in the overall oil viscosity (70 cp using… More >

Jianfeng Lu^1,*, Xinyi Liu¹, Mengtao Shi¹, Chen Cui^1,2, Mahmoud Emam^1,3

Intelligent Automation & Soft Computing, Vol.37, No.3, pp. 2865-2882, 2023, DOI:10.32604/iasc.2023.039742

Abstract Ceramic tiles are one of the most indispensable materials for interior decoration. The ceramic patterns can’t match the design requirements in terms of diversity and interactivity due to their natural textures. In this paper, we propose a sketch-based generation method for generating diverse ceramic tile images based on a hand-drawn sketches using Generative Adversarial Network (GAN). The generated tile images can be tailored to meet the specific needs of the user for the tile textures. The proposed method consists of four steps. Firstly, a dataset of ceramic tile images with diverse distributions is created and then pre-trained based on GAN.… More >

Wenlu Ji¹, Yingqi Liao^1,*, Liudong Zhang²

Intelligent Automation & Soft Computing, Vol.37, No.3, pp. 2825-2848, 2023, DOI:10.32604/iasc.2023.039618

Abstract Existing power anomaly detection is mainly based on a pattern matching algorithm. However, this method requires a lot of manual work, is time-consuming, and cannot detect unknown anomalies. Moreover, a large amount of labeled anomaly data is required in machine learning-based anomaly detection. Therefore, this paper proposes the application of a generative adversarial network (GAN) to massive data stream anomaly identification, diagnosis, and prediction in power dispatching automation systems. Firstly, to address the problem of the small amount of anomaly data, a GAN is used to obtain reliable labeled datasets for fault diagnosis model training based on a few labeled… More >

Runlian Zhang^1,*, Rui Shu¹, Yongzhuang Wei¹, Hailong Zhang², Xiaonian Wu¹

CMC-Computers, Materials & Continua, Vol.76, No.2, pp. 1911-1927, 2023, DOI:10.32604/cmc.2023.041187

Abstract S-boxes can be the core component of block ciphers, and how to efficiently generate S-boxes with strong cryptographic properties appears to be an important task in the design of block ciphers. In this work, an optimized model based on the generative adversarial network (GAN) is proposed to generate 8-bit S-boxes. The central idea of this optimized model is to use loss function constraints for GAN. More specially, the Advanced Encryption Standard (AES) S-box is used to construct the sample dataset via the affine equivalence property. Then, three models are respectively built and cross-trained to generate 8-bit S-boxes based on three… More >

AFAF ALHARTHI^*

BIOCELL, Vol.47, No.8, pp. 1743-1755, 2023, DOI:10.32604/biocell.2023.027154

Abstract Natural biomaterials are now frequently used to build biocarrier systems, which can carry medications and biomolecules to a target region and achieve a desired therapeutic effect. Biomaterials and polymers are of great importance in the synthesis of nanomaterials. The recent studies have tended to use these materials because they are easily obtained from natural sources such as fungi, algae, bacteria, and medicinal plants. They are also biodegradable, compatible with neighborhoods, and non-toxic. Natural biomaterials and polymers are chemically changed when they are linked by cross linking agents with other polymers to create scaffolds, matrices, composites, and interpenetrating polymer networks employing… More >

Jiapeng Wang¹, Bo Zhang^1,*, Haoqiang Cheng¹, Zhixiang Xu²

Journal of Renewable Materials, Vol.11, No.10, pp. 3595-3612, 2023, DOI:10.32604/jrm.2023.030005

Abstract A new method of pretreatment of corn straw with Phanerochaete chrysosporium combined with pyrolysis was proposed to improve the quality of bio-oil. The characterization results demonstrated that microbial pretreatment was an effective method to decrease the lignin, which can achieve a maximum removal rate of 44.19%. Due to the destruction of biomass structure, the content of alkali metal and alkaline earth metal is reduced. Meanwhile, the depolymerized biomass structure created better pyrolysis conditions to promote the pyrolysis efficiency, increase the average decomposition rate of pyrolysis and reduce the residue. In fast pyrolysis, because of the enrichment of cellulose and the… More > Graphic Abstract

Danyang Shao¹, Xiaojia Wang^1,*, Delu Chen¹, Fengxia An^1,2

Journal of Renewable Materials, Vol.11, No.10, pp. 3659-3680, 2023, DOI:10.32604/jrm.2023.029220

Abstract Methanation is an effective way to efficiently utilize product gas generated from the pyrolysis and gasification of organic solid wastes. To deeply study the heat transfer and mass transfer mechanisms in the reactor, a successful three-dimensional comprehensive model has been established. Multiphase flow behavior and heat transfer mechanisms were investigated under reference working conditions. Temperature is determined by the heat release of the reaction and the heat transfer of the gas-solid flow. The maximum temperature can reach 951 K where the catalyst gathers. In the simulation, changes in the gas inlet velocity and catalyst flow rate were made to explore… More >

Ola Ragb¹, Mokhtar Mohamed², Mohamed S. Matbuly¹, Omer Civalek^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2193-2217, 2023, DOI:10.32604/cmes.2023.028992

Abstract Four numerical schemes are introduced for the analysis of photocurrent transients in organic photovoltaic devices. The mathematical model for organic polymer solar cells contains a nonlinear diffusion–reaction partial differential equation system with electrostatic convection attached to a kinetic ordinary differential equation. To solve the problem, Polynomial-based differential quadrature, Sinc, and Discrete singular convolution are combined with block marching techniques. These schemes are employed to reduce the problem to a nonlinear algebraic system. The iterative quadrature technique is used to solve the reduced problem. The obtained results agreed with the previous exact one and the finite element method. Further, the effects… More > Graphic Abstract

Muzi Li^*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2465-2493, 2023, DOI:10.32604/cmes.2023.026827

Abstract Modular construction as an innovative method aids the construction industry in transforming to off-site construction production with high efficiency and environmental friendliness. Despite the obvious advantages, the uptake of modular construction is not booming as expected. However, previous studies have investigated and summarized the barriers to the adoption of modular construction. In this research, a Large-Scale Group Decision Making (LSGDM)- based analysis is first made of the severity of barriers to modular construction adoption from the perspective of construction stakeholders. In addition, the Technology-Organization-Environment (TOE) framework is utilized to identify the barriers based on three contexts (technology, organization, and environment).… More >