Yanming Xu^1,2, Leilei Chen^1,2,*, Haojie Lian³

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.010581

Abstract An isogeometric coupling algorithm based on the finite element method and the boundary element method (IGA-FEM/BEM) is proposed for the simulation of acoustic fluid-structure interaction and structuralacoustic topology optimization using the direct differentiation method. The geometries are constructed from triangular control meshes through Loop subdivision scheme. The effect of sound-absorbing materials on the acoustic response is characterized by acoustic impedance boundary conditions. The optimization problem is formulated in the framework of Solid Isotropic Material with Penalization methods and the sound absorption coefficients on elements are selected as design variables. Numerical examples are presented to demonstrate the validity and efficiency of… More >

Yanyong Wang^1,2, Kunpeng Zhong¹, Xiaoguang Wang^1,2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09443

Abstract The storage of solar energy in the subsurface in terms of heat is considered as a promising way for energy storage and conversion in future, which has a great potential to solve the temporal and spatial mismatch between energy demand and supply. Thermal energy storage in deep saline aquifers is capable to convert intermittent solar energy into high temperature stable geothermal energy. In this study, we propose a new solar energy storage and conversion system in which solar energy is firstly converted into heat using parabolic trough and then thermal energy storage in deep saline aquifer is conducted by high… More >

Haibo Chen^1,*, Fuhang Jiang¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.1, pp. 1-1, 2023, DOI:10.32604/icces.2023.09414

Abstract Acoustic wave propagation has been the subject of many studies in engineering and physics. Researchers have shown an increased interest in recent years in the acoustic scattering of periodic systems, such as phononic crystals and metamaterials [1]. These artificial periodic systems possess some particular acoustic characteristics including noise control, waveguides and negative refraction, which manifest excellent potential applicability in acoustic engineering. Based on the isogeometric acoustic boundary element method (BEM) [2], an efficient shape optimization approach is proposed in this research for threedimensional doubly-periodic multi-layered systems. The interfaces between different acoustic mediums are infinite doubly periodic surfaces, which can be… More >

Haiming Zhang^1,2,*, Shilin Zhao^1,2, Zhenshan Cui^1,2

The International Conference on Computational & Experimental Engineering and Sciences, Vol.25, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.08884

Abstract Particle-reinforced aluminum matrix composites (PRAMCs) have great potential for application in aerospace, automobile, defense, and electronics due to their high specific strength and stiffness and good resistance to wear and corrosion. Achieving a superior trade-off between the strength and ductility of PRAMCs necessitates an elaborative control of the microstructures, like the size and distribution of particles, as well as grain size, morphology, and texture of the matrix. The multiscale interaction between the particles and the matrix’s microstructure is insufficiently understood due to the lagging of high-resolved in-situ characterization. This work proposes a nonlocal physically based crystal plasticity (CP) modeling approach… More >

Shahzad Noor Abbasi¹, Shahzaib Ashraf^1,*, M. Shazib Hameed¹, Sayed M. Eldin^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.3, pp. 2795-2844, 2023, DOI:10.32604/cmes.2023.028963

Abstract The primary goal of this research is to determine the optimal agricultural field selection that would most effectively support manufacturing producers in manufacturing production while accounting for unpredictability and reliability in their decision-making. The PFS is known to address the levels of participation and non-participation. To begin, we introduce the novel concept of a PFZN, which is a hybrid structure of Pythagorean fuzzy sets and the ZN. The PFZN is graded in terms of membership and non-membership, as well as reliability, which provides a strong advice in real-world decision support concerns. The PFZN is a useful tool for dealing with… More >

Ernest Léontin Lemoubou^a , Hervé Thierry Tagne Kamdem^a,* , Jean Roger Bogning^b

Frontiers in Heat and Mass Transfer, Vol.8, pp. 1-8, 2017, DOI:10.5098/hmt.8.34

Abstract Numerical experiments involving heat transfer were performed to analyze the influence of both fin thermo-geometric parameter and cooling boundary conditions on the temperature distribution and the efficiency of convective cooled inhomogeneous rectangular fin. The inhomogeneity of the fin is due to both temperature dependent thermal conductivity and convection heat coefficients. The analysis was facilitated by the use of the differential transformation method, which can solve nonlinear differential equation. A specific application is first made for temperature/efficiency homogeneous fin predictions and the results are in excellent agreement with standard exact results. Predictions of inhomogeneous fin temperature and efficiency for three different… More >

R. Rajaraman^a , L. Anna Gowsalya^b,*, R. Velraj^c

Frontiers in Heat and Mass Transfer, Vol.11, pp. 1-8, 2018, DOI:10.5098/hmt.11.23

Abstract To get accurate results in casting simulations, prediction of interfacial heat transfer coefficient (IHTC) is imperative. In this paper an attempt has been made for estimating IHTC during solidification process of a rectangular aluminium alloy casting in a sand mould. The cast temperature and mould temperature are measured during the experimental process at different time intervals during the process of solidification. Two different inverse methods, namely control volume and Beck’s approach are used to estimate the heat flux and temperature at the mould surface by using the experimentally measured temperatures. In the case of control volume technique, the partial derivative… More >

Jiaqi Wang¹, Pengfei Sun¹, Leilei Chen², Jianfeng Yang³, Zhenghe Liu¹, Haojie Lian^1,*

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.2, pp. 1381-1418, 2023, DOI:10.32604/cmes.2023.023693

Abstract Geological hazard is an adverse geological condition that can cause loss of life and property. Accurate prediction and analysis of geological hazards is an important and challenging task. In the past decade, there has been a great expansion of geohazard detection data and advancement in data-driven simulation techniques. In particular, great efforts have been made in applying deep learning to predict geohazards. To understand the recent progress in this field, this paper provides an overview of the commonly used data sources and deep neural networks in the prediction of a variety of geological hazards. More >

Loc Vu-Quoc^1,*, Alexander Humer²

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.2, pp. 1069-1343, 2023, DOI:10.32604/cmes.2023.028130

Abstract Three recent breakthroughs due to AI in arts and science serve as motivation: An award winning digital image, protein folding, fast matrix multiplication. Many recent developments in artificial neural networks, particularly deep learning (DL), applied and relevant to computational mechanics (solid, fluids, finite-element technology) are reviewed in detail. Both hybrid and pure machine learning (ML) methods are discussed. Hybrid methods combine traditional PDE discretizations with ML methods either (1) to help model complex nonlinear constitutive relations, (2) to nonlinearly reduce the model order for efficient simulation (turbulence), or (3) to accelerate the simulation by predicting certain components in the traditional… More >

Jinlan Xu^*, Shuxin Xiao, Gang Xu, Renshu Gu

CMES-Computer Modeling in Engineering & Sciences, Vol.137, No.2, pp. 1957-1973, 2023, DOI:10.32604/cmes.2023.028665

Abstract In this paper, we propose a parameterization transfer algorithm for planar domains bounded by B-spline curves, where the shapes of the planar domains are similar. The domain geometries are considered to be similar if their simplified skeletons have the same structures. One domain we call source domain, and it is parameterized using multi-patch B-spline surfaces. The resulting parameterization is C1 continuous in the regular region and G1 continuous around singular points regardless of whether the parameterization of the source domain is C1/G1 continuous or not. In this algorithm, boundary control points of the source domain are extracted from its parameterization… More >