C. T. Wu¹, F.-L. Yang², D. L. Young³

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 135-154, 2011, DOI:10.3970/cmc.2011.023.135

Abstract This paper proposes a method that can calculate the hydrodynamic force of a non-circular object in an inviscid, irrotational, and incompressible flow with the presence of external flow singularities. In order to handle irregular object, the method of fundamental solutions (MFS) is employed to numerically construct the singularity system that describes the body and the flow motion and meets the boundary condition. The obtained singularity system is then integrated into the generalized Lagally theorem to compute the instantaneous hydrodynamic force via algebraic calculations and to describe the unsteady interaction of the object and its ambient flow. The proposed method is… More >

Cheng-Hung San¹, Che-Wun Hong^1,2

CMC-Computers, Materials & Continua, Vol.23, No.2, pp. 101-118, 2011, DOI:10.3970/cmc.2011.023.101

Abstract Poly(ethylene oxide) (PEO) is a commonly used electrolytic polymer in lithium ion batteries because of its high viscosity which allows fabricating thin layers. However, its inherent low ionic conductivity must be enhanced by the addition of highly conductive salt additives. Also its weak mechanical strength needs a complementary block, such as poly(styrene) (PS), to strengthen the electrolytic membrane during charging/discharging processes. PS is a strong material to complement the PEO and to create a reinforced copolymer electrolyte termed as the poly(styrene-b-ethylene oxide) (PS-PEO). In this work, molecular dynamics simulations are employed to study the effects of doping the PS constituents… More >

H. T. Chen¹,K. H. Hsu¹, S. K. Lee¹, L. Y. Haung¹

CMC-Computers, Materials & Continua, Vol.22, No.3, pp. 239-260, 2011, DOI:10.3970/cmc.2011.022.239

Abstract The inverse scheme of the finite difference method in conjunction with the least-squares scheme and experimental measured temperatures is proposed to solve a two-dimensional steady-state inverse heat conduction problem in order to estimate the natural-convection heat transfer coefficient under the isothermal situation [`h] iso from three vertical fins mounted on a vertical plate and fin efficiency hf for various values of the fin spacing and fin height. The measured fin temperatures and ambient air temperature are measured from the present experimental apparatus conducted in a small wind tunnel. The heat transfer coefficient on the middle fin of three vertical fins… More >

Yong Kou¹, Ke Jin¹, Xiaojing Zheng^1,2

CMC-Computers, Materials & Continua, Vol.22, No.2, pp. 129-146, 2011, DOI:10.3970/cmc.2011.022.129

Abstract Magnetic shielding needs to be employed to ensure proper operation of some electronic equipment which are sensitive to external magnetic interference, such as cryogenic valves located inside the ITER feeder cubicles. This paper is concerned with the shielding efficiency of the magnetic shielding enclosures. A 3-D theoretical model for Fe-Ni alloy magnetic shielding enclosures based on finite element method (FEM) is obtained with the nonlinear law of magnetization. The influence of shielding materials, enclosure configurations, single or multi- layer designs, and apertures on the shielding efficiency is investigated. It is shown that the proposed model can predict the shielding efficiency… More >

M.F. Liu¹

CMC-Computers, Materials & Continua, Vol.22, No.2, pp. 97-128, 2011, DOI:10.3970/cmc.2011.022.097

Abstract A new invented Orthogonal Tapered Beam Functions (OTBFs) have been introduced in this paper and used in accordance with the Rayleigh-Ritz method to determine the natural frequencies and mode shapes of the non-uniform rectangular isotropic plates with varying thickness in one or two directions. The generation of the OTBFs is based on the static solution of a one-dimensional beam problem subjected to constant applied load, and then extends to an orthogonal or orthonomal infinite set of admissible functions by performing the three-term recurrence scheme. A wide range of non-uniform rectangular plate whose domain is referenced by a so-called truncation factor… More >

Le-Le Zhang¹, Xue-Qian Fang¹, Jin-Xi Liu¹, Ji-Hong Ma¹

CMC-Computers, Materials & Continua, Vol.21, No.3, pp. 171-186, 2011, DOI:10.3970/cmc.2011.021.171

Abstract On the basis of continuum surface elasticity, two interacting cylindrical nano-inhomogeneities with surface/interface effect in a small-sized solid under anti-plane shear waves are investigated, and the dynamic stress around the nano-inhomogeneities is analyzed. The wave function expansion method is used to expressed the wave field around the two nano-inhomogeneities. The total wave field is obtained by the addition theorem for cylindrical wave function. Through analysis, it is found that the distance between the two nano-inhomogeneities shows great effect on the dynamic stress in nano composites. The effect of the distance is also related to the properties of the nano-inhomogeneities and… More >

S. H. Kwon¹, B. R. Kim², H. K. Lee^2,3

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 65-86, 2011, DOI:10.3970/cmc.2011.021.065

Abstract The electromagnetic shielding effectiveness of grid-mesh films made of polyaniline was numerically investigated, and the optimal size of the polyaniline grid was determined through numerical analyses. The permittivity of polyaniline was first determined from an inverse analysis based on experimental data. A series of numerical analyses were carried out with 225 polyaniline grid-mesh films of different thickness, spacing, and width, and the shielding effectiveness of every grid was examined. In addition to the numerical analysis, the transparency of the grid-mesh films and the amount of polyaniline material required to manufacture the unit grid area (1mx1m) were calculated. The optimal dimensions… More >

Chein-Shan Liu¹

CMC-Computers, Materials & Continua, Vol.21, No.1, pp. 17-40, 2011, DOI:10.3970/cmc.2011.021.017

Abstract Only the left-boundary data of temperature and heat flux are used to estimate an unknown parameter function α(x) in T_t(x,t) = ∂(α(x)T_x)/∂x + h(x,t), as well as to recover the right-boundary data. When α(x) is given the above problem is a well-known inverse heat conduction problem (IHCP). This paper solves a mixed-type inverse problem as a combination of the IHCP and the problem of parameter identification, without needing to assume a function form of α(x) a priori, and without measuring extra data as those used by other methods. We use the one-step Lie-Group Adaptive Method (LGAM) for the semi-discretizations of… More >

X.P. Shen, A. Diaz¹, T. Sheehy²

CMC-Computers, Materials & Continua, Vol.20, No.3, pp. 205-224, 2010, DOI:10.3970/cmc.2010.020.205

Abstract This paper presents a case study for the design of a mud-weight window (MWW) with three-dimensional (3-D), finite-element (FE) tools for subsalt wells. The trajectory of the target well penetrates a 7 km thick salt body. A numerical scheme has been proposed for calculating the shear failure gradient (SFG) and fracture gradient (FG) with 3-D FE software. User subroutines have been developed to address non-uniform pore-pressure distribution. A series of FE calculations were performed to obtain the MWW of the target wellbore, which consists of the SFG and FG for the subsalt sections. Although no reverse faulting structure exists in… More >

Alamusi¹, Y.L. Liu¹, N. Hu^1,2

CMC-Computers, Materials & Continua, Vol.20, No.2, pp. 101-118, 2010, DOI:10.3970/cmc.2010.020.101

Abstract In this work, we propose a 3 dimensional (3D) numerical model to predict the piezoresistivity behaviors of a nanocomposite material made from an insulating polymer filled by carbon nanotubes (CNTs). This material is very hopeful for its application in highly sensitive strain sensor by measuring its piezoresistivity, i.e., the ratio of resistance change versus applied strain. In this numerical approach, a 3D resistor network model is firstly proposed to predict the electrical conductivity of the nanocomposite with a large amount of randomly dispersed CNTs under the zero strain state. By focusing on the fact that the piezoresistivity of the nanocomposite… More >