Zhaolin Lv¹, Yuexia Zhao², Hongyue Kang^3,*, Zhenyu Gao³, Yuhang Qin⁴

CMC-Computers, Materials & Continua, Vol.78, No.2, pp. 2337-2360, 2024, DOI:10.32604/cmc.2023.045826

Abstract Flexible job shop scheduling problem (FJSP) is the core decision-making problem of intelligent manufacturing production management. The Harris hawk optimization (HHO) algorithm, as a typical metaheuristic algorithm, has been widely employed to solve scheduling problems. However, HHO suffers from premature convergence when solving NP-hard problems. Therefore, this paper proposes an improved HHO algorithm (GNHHO) to solve the FJSP. GNHHO introduces an elitism strategy, a chaotic mechanism, a nonlinear escaping energy update strategy, and a Gaussian random walk strategy to prevent premature convergence. A flexible job shop scheduling model is constructed, and the static and dynamic FJSP is investigated to minimize… More >

Mingzhao Han¹, Susilawati Kasim^1,*, Zhongming Yang², Xi Deng², Md Kamal Uddin¹, Noor Baity Saidi³, Effyanti Mohd Shuib¹

Phyton-International Journal of Experimental Botany, Vol.93, No.2, pp. 213-226, 2024, DOI:10.32604/phyton.2024.047150

Abstract Drought stress is a major factor affecting plant growth and crop yield production. Plant extracts as natural biostimulants hold great potential to strengthen plants to overcome drought impacts. To explore the effect of Polygonum minus extract (PME) in enhancing drought tolerance in plants, a study was set up in a glasshouse environment using 10 different treatment combinations. PME foliar application were designed in CRD and effects were closely observed related to the growth, physiology, and antioxidant system changes in maize (Zea mays L.) under well-watered and drought conditions. The seaweed extract (SWE) was used as a comparison. Plants subjected to… More >

Hang Cui¹, Hongbo Ren^1,*, Qiong Wu^1,2, Hang Lv¹, Qifen Li^1,2, Weisheng Zhou³

Energy Engineering, Vol.121, No.3, pp. 581-601, 2024, DOI:10.32604/ee.2023.047470

Abstract Cascading faults have been identified as the primary cause of multiple power outages in recent years. With the emergence of integrated energy systems (IES), the conventional approach to analyzing power grid cascading faults is no longer appropriate. A cascading fault analysis method considering multi-energy coupling characteristics is of vital importance. In this study, an innovative analysis method for cascading faults in integrated heat and electricity systems (IHES) is proposed. It considers the degradation characteristics of transmission and energy supply components in the system to address the impact of component aging on cascading faults. Firstly, degradation models for the current carrying… More >

Zhengrong Shi^1,3, Jie Ren¹, Tao Zhang^1,3,*, Yanming Shen^2,*

Energy Engineering, Vol.121, No.3, pp. 681-702, 2024, DOI:10.32604/ee.2023.045238

Abstract Building energy consumption and building carbon emissions both account for more than 20% of their total national values in China. Building employing phase change material (PCM) for passive temperature control shows a promising prospect in meeting the comfort demand and reducing energy consumption simultaneously. However, there is a lack of more detailed research on the interaction between the location and thickness of PCM and indoor natural convection, as well as indoor temperature distribution. In this study, the numerical model of a passive temperature-controlled building integrating the developed PCM module is established with the help of ANSYS. In which, the actual… More > Graphic Abstract

Jun Zhao^*, Chaoying Yang, Ran Li, Jinge Song

Energy Engineering, Vol.121, No.3, pp. 747-767, 2024, DOI:10.32604/ee.2023.042806

Abstract Due to the impact of source-load prediction power errors and uncertainties, the actual operation of the park will have a wide range of fluctuations compared with the expected state, resulting in its inability to achieve the expected economy. This paper constructs an operating simulation model of the park power grid operation considering demand response and proposes a multi-time scale operating simulation method that combines day-ahead optimization and model predictive control (MPC). In the day-ahead stage, an operating simulation plan that comprehensively considers the user’s side comfort and operating costs is proposed with a long-term time scale of 15 min. In… More >

BINGJIE WANG¹, YEWEN ZHOU^1,2,3, TONGJUAN NIU¹, MENGQING YIN¹, SHENG CUI^1,2,3,*

BIOCELL, Vol.48, No.2, pp. 327-338, 2024, DOI:10.32604/biocell.2023.044630

Abstract Introduction: The regulation of thyroid-stimulating hormone (TSH) synthesis involves neurotransmitters, with melatonin being a subject of ongoing debate. TSH transcription, synthesis, and secretion from the pituitary pars distalis (PD) is primarily regulated in a photoperiodic manner by thyrotropin-releasing hormone (TRH). In contrast, in the pituitary pars tuberalis (PT), mRNA transcription and alpha/beta chain synthesis, but not secretion, of a TSH-like product is regulated by melatonin. Conversely, non-photoperiodic melatonin might also affect the secretion of a TSH-like product from the PT. Nevertheless, the impact of exogenous melatonin on the underlying PD-TSH synthesis remains unclear. Casein kinase 1α (CK1α) plays a negative… More >

Muhannad J. Alshareef^*

Intelligent Automation & Soft Computing, Vol.38, No.3, pp. 297-313, 2023, DOI:10.32604/iasc.2023.046722

Abstract Photovoltaic (PV) systems utilize maximum power point tracking (MPPT) controllers to optimize power output amidst varying environmental conditions. However, the presence of multiple peaks resulting from partial shading poses a challenge to the tracking operation. Under partial shade conditions, the global maximum power point (GMPP) may be missed by most traditional maximum power point tracker. The flower pollination algorithm (FPA) and particle swarm optimization (PSO) are two examples of metaheuristic techniques that can be used to solve the issue of failing to track the GMPP. This paper discusses and resolves all issues associated with using the standard FPA method as… More >

Liang Zeng^1,2, Junyang Shi¹, Yanyan Li¹, Shanshan Wang^1,2,*, Weigang Li³

CMC-Computers, Materials & Continua, Vol.78, No.1, pp. 375-392, 2024, DOI:10.32604/cmc.2023.045803

Abstract The job shop scheduling problem is a classical combinatorial optimization challenge frequently encountered in manufacturing systems. It involves determining the optimal execution sequences for a set of jobs on various machines to maximize production efficiency and meet multiple objectives. The Non-dominated Sorting Genetic Algorithm III (NSGA-III) is an effective approach for solving the multi-objective job shop scheduling problem. Nevertheless, it has some limitations in solving scheduling problems, including inadequate global search capability, susceptibility to premature convergence, and challenges in balancing convergence and diversity. To enhance its performance, this paper introduces a strengthened dominance relation NSGA-III algorithm based on differential evolution… More >

Mohamed Ammar^1,*, Alireza Mousavi¹, Hamed Al-Raweshidy^2,*

Digital Engineering and Digital Twin, Vol.2, pp. 1-31, 2024, DOI:10.32604/dedt.2023.044930

Abstract The advent of technology around the globe based on the Internet of Things, Cloud Computing, Big Data, Cyber-Physical Systems, and digitalisation. This advancement introduced industry 4.0. It is challenging to measure how enterprises adopt the new technologies. Industry 4.0 introduced Digital Twins, given that no specific terms or definitions are given to Digital Twins still challenging to define or conceptualise the Digital Twins. Many academics and industries still use old technologies, naming it Digital Twins. This young technology is in danger of reaching the plateau despite the immense benefit to sectors. This paper proposes a novel and unique definition for… More >

Bingzhu Wang^1,*, Xiangrui Ye^2,*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1401-1425, 2024, DOI:10.32604/cmes.2024.047364

Abstract A novel three-dimensional-fiber reinforced soft pneumatic actuator (3D-FRSPA) inspired by crab claw and human hand structure that can bend and deform independently in each segment is proposed. It has an omni-directional bending configuration, and the fibers twined symmetrically on both sides to improve the bending performance of FRSPA. In this paper, the static and kinematic analysis of 3D-FRSPA are carried out in detail. The effects of fiber, pneumatic chamber and segment length, and circular air chamber radius of 3D-FRSPA on the mechanical performance of the actuator are discussed, respectively. The soft mobile robot composed of 3D-FRSPA has the ability to… More >