Zaibo Zhou¹, Juanhong Liu^1,2,3,*, Kun Luo¹, Aixiang Wu^1,3, Hongjiang Wang^1,3

Journal of Renewable Materials, Vol.10, No.2, pp. 373-384, 2022, DOI:10.32604/jrm.2022.016380

Abstract In order to reduce the influence of impurities in hemihydrate phosphogypsum(HPG) on the environment and improve the workability of HPG, the effects of the content of quicklime and types of biopolymer (hydroxypropyl methylcellulose, xanthan gum, sodium polyacrylate(PAANa)) on the compressive strength, softening coefficient and ultrasonic velocity of HPG were evaluated. When the content of quicklime was 1.5% and the content of PAANa was 0.2%, HPG had the best mechanical properties and workability, its water retention rate can be increased by 5.8%, and unconfined compressive strength of 3 days increased by 10.3% and 7 days increased by 13.1%. Through the analysis… More > Graphic Abstract

Hussein Abdel-Mawgoud¹, Salah Kamel¹, Hegazy Rezk^2,3, Tahir Khurshaid⁴, Sang-Bong Rhee^4,*

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 1463-1481, 2021, DOI:10.32604/cmc.2021.017995

Abstract Recently, implementation of Battery Energy Storage (BES) with photovoltaic (PV) array in distribution networks is becoming very popular in overall the world. Integrating PV alone in distribution networks generates variable output power during 24-hours as it depends on variable natural source. PV can be able to generate constant output power during 24-hours by installing BES with it. Therefore, this paper presents a new application of a recent metaheuristic algorithm, called Slime Mould Algorithm (SMA), to determine the best size, and location of photovoltaic alone or with battery energy storage in the radial distribution system (RDS). This algorithm is modeled from… More >

Luis Alfonso Aguilar Pérez^1,*, Daniel Nieto Ángel^1,*, Moisés Roberto Vallejo Pérez², Daniel Leobardo Ochoa Martínez¹, David Espinosa Victoria³, Andrés Rebolledo Martinez⁴, Abel Rebouças São José⁵

Phyton-International Journal of Experimental Botany, Vol.90, No.4, pp. 1205-1216, 2021, DOI:10.32604/phyton.2021.015109

Abstract The development and implementation of sustainable and environmentally friendly agricultural practices are indispensable as alternatives to pesticide use and to keep populations of soil-borne plant pathogens at levels that do not affect crop productivity. The present research evaluates the incidence of soil-borne phytopathogens on the pineapple variety MD-2, which was subjected to different treatments: Incorporation of Crotalaria juncea into the soil (organic amendment), application of dolomitic lime to soil (inorganic amendment), and the use of plastic mulch covering the soil. During the crop cycle (15 months), the following variables were evaluated: plant height (cm), fruit weight (kg·plant⁻¹ ), crop yield… More >

Salah K. Elsayed^1,*, Ahmed M. Agwa^2,3, Mahmoud A. El-Dabbah², Ehab E. Elattar¹

Intelligent Automation & Soft Computing, Vol.28, No.3, pp. 639-651, 2021, DOI:10.32604/iasc.2021.016464

Abstract The problem of parameters identification for transformer equivalent circuit can be solved by optimizing a nonlinear formula. The objective function attempts to minimize the sum of squared relative errors amongst the accompanying calculated and actual points of currents, powers, and secondary voltage during the load test of the transformer subject to a set of parameters constraints. The authors of this paper propose applying a new and efficient stochastic optimizer called the slime mold optimization algorithm (SMOA) to identify parameters of the transformer equivalent circuit. The experimental measurements of load test of single- and three-phase transformers are entered to MATLAB code… More >

Kaisarul Islam¹, Tabia Hossain¹, Mohammad Monirujjaman Khan^1,*, Mehedi Masud², Roobaea Alroobaea²

Computer Systems Science and Engineering, Vol.37, No.1, pp. 19-32, 2021, DOI:10.32604/csse.2021.015528

Abstract In this paper performance of three different designs of a 60 GHz high gain antenna for body-centric communication has been evaluated. The basic structure of the antenna is a slotted patch consisting of a rectangular ring radiator with passive radiators inside. The variation of the design was done by changing the shape of these passive radiators. For free space performance, two types of excitations were used—waveguide port and a coaxial probe. The coaxial probe significantly improved both the bandwidth and radiation efficiency. The center frequency of all the designs was close to 60 GHz with a bandwidth of more than… More >

Sangmi Moon¹, Hyeonsung Kim¹, Seng-Phil Hong², Mingoo Kang³, Intae Hwang^1,*

CMC-Computers, Materials & Continua, Vol.66, No.1, pp. 59-70, 2021, DOI:10.32604/cmc.2020.013132

Abstract Millimeter-wave communications are suitable for application to massive multiple-input multiple-output systems in order to satisfy the ever-growing data traffic demands of the next-generation wireless communication. However, their practical deployment is hindered by the high cost of complex hardware, such as radio frequency (RF) chains. To this end, operation in the beamspace domain, through beam selection, is a viable solution. Generally, the conventional beam selection schemes focus on the feedback and exhaustive search techniques. In addition, since the same beam in the beamspace may be assigned to a different user, conventional beam selection schemes suffer serious multi-user interference. In addition, some… More >

Ehab Mahmoud Mohamed^{1, 2, *}, Sherief Hashima^{3, 4}, Kohei Hatano^{3, 5}, Hani Kasban⁴, Mohamed Rihan⁶

CMC-Computers, Materials & Continua, Vol.65, No.3, pp. 1987-2007, 2020, DOI:10.32604/cmc.2020.011816

Abstract The communication in the Millimeter-wave (mmWave) band, i.e., 30~300 GHz, is characterized by short-range transmissions and the use of antenna beamforming (BF). Thus, multiple mmWave access points (APs) should be installed to fully cover a target environment with gigabits per second (Gbps) connectivity. However, inter-beam interference prevents maximizing the sum rates of the established concurrent links. In this paper, a reinforcement learning (RL) approach is proposed for enabling mmWave concurrent transmissions by finding out beam directions that maximize the long-term average sum rates of the concurrent links. Specifically, the problem is formulated as a multiplayer multiarmed bandit (MAB), where mmWave… More >

Liang Jia, Chunxiang Li, Jian Guo^*

Journal of Renewable Materials, Vol.8, No.10, pp. 1357-1373, 2020, DOI:10.32604/jrm.2020.012136

Abstract Lime-fly ash stabilized loess has a poor early strength, which results in a later traffic opening time when it is used as road-base materials. Consideration of the significant early strength characteristics of sulphate aluminum cement (SAC), it is always added into the lime-fly ash mixtures to improve the early strength of stabilized loess. However, there is a scarcity of research on the mechanical behavior of lime-fly ash-SAC stabilized loess and there is a lack of quantitative evaluation of loess stabilized with binder materials. This research explored the effects of the amount of binder materials, curing time and porosity on the… More >

E. KOCH¹, B.C. WINIK², A. CASTRO-VAZQUEZ^1,3,*

BIOCELL, Vol.33, No.1, pp. 49-65, 2009, DOI:10.32604/biocell.2009.33.049

Abstract Development of Pomacea canaliculata from the gastrula stage until the first day after hatching is described. Trochophore embryos are developed after gastrulation, showing the prototroch as a crown of ciliated orange-brownish cells. However, no true veliger embryos are formed, since the prototroch does not fully develop into a velum. Afterward, the connection between the fore- and midgut is permeated and the midgut becomes full of the pink-reddish albumen, which is stored into a central archenteron’s lake, from where it is accumulated into the large cells forming the midgut wall (“giant cells”). Electron microscopy of giant cells in late embryos showed… More >

ADELINA FERREIRA¹, MAHMOUD MEHANNA^1,2, CYNTHIA P. A. PRADO³

BIOCELL, Vol.32, No.2, pp. 185-194, 2008, DOI:10.32604/biocell.2008.32.185

Abstract The spermatogenesis of Pseudis limellum, from the Southern Pantanal, Brazil, was studied from July 1995 to May 1996, through histological sections of the testis. The cells could be differentiated as: primary spermatogonia, large cells, generally with bilobed nucleus; secondary spermatogonia, smaller cells, with darker cytoplasm, chromatin of radial form; primary and secondary spermatocytes, differentiated according to the different stages of the nucleus during the successive cells divisions. Furthermore, we observed cells in process of morphologic differentiation: rounded spermatids much smaller, with nucleus containing chromatin in compacting process and cytoplasm reduction; elongated spermatids, generally parallel organized in well defined bundles, with… More >