Xi Wang¹, Shan Qing^1,*, Zhumei Luo^1,*, Yiqin Liu^1,2, Zichang Shi¹, Jiachen Li¹

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.9, pp. 2399-2416, 2023, DOI:10.32604/fdmp.2023.028024

Abstract Propylene glycol-based MWCNT (multi-walled carbon nanotubes) nanofluids were prepared in the framework of a two-step method and by using a suitable PVP (polyvinyl pyrrolidone) dispersant. The BBD (Box-Behnken design) model was exploited to analyze 17 sets of experiments and examine the sensitivity of the absorbance to three parameters, namely the concentration of MWCNT, the SN ratio (mass ratio of carbon nanotubes to surfactants) and the sonication time. The results have revealed that, while the SN ratio and concentration of MWCNT have a strong effect on the absorbance, the influence of the sonication time is less important. The statistical method of… More >

Yatim Lailun Ni’mah^*, Nabila Eka Yuningsih, Suprapto Suprapto

Journal of Renewable Materials, Vol.11, No.6, pp. 2913-2924, 2023, DOI:10.32604/jrm.2023.025431

Abstract The adsorption of Pb(II) on silica gel synthesized from chemical glass bottle waste has been studied. The effect of independent variables (adsorbent dose, initial concentration of Pb(II), contact time, and pH) on the Pb(II) removal from water was evaluated and optimized using the Response Surface Methodology (RSM). Under optimized conditions (adsorbent dose: 20 mg; contact time: 30 min; initial Pb(II) concentration: 120 mg. L⁻¹ ; and pH: 8), the removal of Pb(II) was 99.77%. The adsorption equilibrium data obtained from the batch experiment were investigated using different isotherm models. The Langmuir isotherm model fits the experimental data. This shows that… More >

Shahzaib Ashraf¹, Bushra Batool², Muhammad Naeem^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.136, No.2, pp. 1785-1811, 2023, DOI:10.32604/cmes.2023.024851

Abstract This research proposes multicriteria decision-making (MCDM)-based real-time Mesenchymal stem cells (MSC) transfusion framework. The testing phase of the methodology denotes the ability to stick to plastic surfaces, the upregulation and downregulation of certain surface protein markers, and lastly, the ability to differentiate into various cell types. First, two scenarios of an enhanced dataset based on a medical perspective were created in the development phase to produce varying levels of emergency. Second, for real-time monitoring of COVID-19 patients with different emergency levels (i.e., mild, moderate, severe, and critical), an automated triage algorithm based on a formal medical guideline is proposed, taking… More >

XIN MENG^*, XUE LI, LIANRONG YANG, RUI YIN, LEHUI QI, QI GUO

BIOCELL, Vol.47, No.1, pp. 91-107, 2023, DOI:10.32604/biocell.2023.024310

Abstract In recent years, microbial metabolomics, a new field that has attracted wide attention, provides a map of metabolic pathways and clarifies the interaction mechanism between microorganisms and hosts. Many microorganisms are found in the human intestine, oral cavity, vagina, etc. Probiotics could maintain the good health of the host, while pathogens and an imbalance of bacterial flora lead to a series of diseases of the body and mind. Metabolomics is a science for qualitative and quantitative analysis of all metabolites in an organism or biological system, which could provide key information to understand the related metabolic pathways and associated changes.… More >

Xinyue Wang^1,#, Jing Xu^1,#, Qihong Gu¹, Dingxuan Tang¹, Huoyan Ji², Shaoqing Ju², Feng Wang^2,*, Lin Chen³, Ruoyu Yuan^2,*

Oncologie, Vol.24, No.3, pp. 513-526, 2022, DOI:10.32604/oncologie.2022.024373

Abstract Background: MicroRNAs (miRNAs) have been identified as promising novel biomarkers for cancer diagnosis and prognosis, especially for hepatocellular carcinoma (HCC). Nowadays, the expression level of miR-21 in serum samples is a diagnostic indicator for HCC diagnosis. Thus, the quantitative determination of miRNA concentration is of significance in clinical practice. It is particularly important to establish an analytical detection method for miR-21 in patient serum. Methods: The signal readout for miR-21 was based on the mass response of a reporter peptide using an isotope dilution mass spectrometry (MS) method in this work. To be more specific, miR-21 was biotinylated before being… More >

Mengyao Yan¹, Xianqi Zeng¹, Banghui Zhang¹, Hui Zhang², Di Tan¹, Binghua Cai¹, Shenchun Qu¹, Sanhong Wang^1,*

Phyton-International Journal of Experimental Botany, Vol.92, No.1, pp. 193-208, 2023, DOI:10.32604/phyton.2022.023078

Abstract The effect of soil nutrient content on fruit yield and fruit quality is very important. To explore the effect of soil nutrients on apple quality we investigated 200 fruit samples from 40 orchards in Feng County, Jiangsu Province. Soil mineral elements and fruit quality were measured. The effect of soil nutrient content on fruit quality was analyzed by artificial neural network (ANN) model. The results showed that the prediction accuracy was highest (R²= 0.851, 0.847, 0.885, 0.678 and 0.746) in mass per fruit (MPF), hardness (HB), soluble solids concentrations (SSC), titratable acid concentration (TA) and solid-acid ratio (SSC/TA), respectively. The sensitivity… More >

Yizhang Wang¹, Zhaoyang Yu¹, Jinbo Hu^1,2,*, Shanshan Chang¹, Yuan Liu¹, Ting Li², Gonggang Liu^1,*, Xiaodong (Alice) Wang³

Journal of Renewable Materials, Vol.11, No.1, pp. 147-165, 2023, DOI:10.32604/jrm.2023.021306

Abstract In this paper, the residue from bamboo factory has been used to design photo-Fenton catalyst, which has the advantages of low cost and magnetic recycling. The photo-Fenton catalytic performance of the biocarbon-based catalyst was excellent and its optimal preparation process was also explored by response surface methodology. First, bamboo-carbon fiber was selected as the photo-Fenton catalyst carrier. Subsequently, the surface of the carbon fiber was modified, with which dopamine, nano-Fe₃O₄ and nano-TiO₂ were successively loaded by hydrothermal method. After examined single factor tests, four factors including dopamine concentration, ferric chloride mass, P25 titanium dioxide mass and liquid-solid ratio were selected… More > Graphic Abstract

Tomás Sureda Riera^1,*, Juan Ramón Bermejo Higuera², Javier Bermejo Higuera², Juan Antonio Sicilia Montalvo², José Javier Martínez Herráiz¹

CMES-Computer Modeling in Engineering & Sciences, Vol.133, No.3, pp. 579-599, 2022, DOI:10.32604/cmes.2022.020976

Abstract Web applications represent one of the principal vehicles by which attackers gain access to an organization’s network or resources. Thus, different approaches to protect web applications have been proposed to date. Of them, the two major approaches areWeb Application Firewalls (WAF) and Runtime Application Self Protection (RASP). It is, thus, essential to understand the differences and relative effectiveness of both these approaches for effective decisionmaking regarding the security of web applications. Here we present a comparative study between WAF and RASP simulated settings, with the aim to compare their effectiveness and efficiency against different categories of attacks. For this, we… More >

Aouatif Saad^1,*, Mohammed EL Ganaoui²

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.1, pp. 95-103, 2023, DOI:10.32604/fdmp.2023.022014

Abstract Resin transfer molding (RTM) is among the most used manufacturing processes for composite parts. Initially, the resin cure is initiated by heat supply to the mold. The supplementary heat generated during the reaction can cause thermal gradients in the composite, potentially leading to undesired residual stresses which can cause shrinkage and warpage. In the present numerical study of these processes, a one-dimensional finite difference method is used to predict the temperature evolution and the degree of cure in the course of the resin polymerization; the effect of some parameters on the thermal gradient is then analyzed, namely: the fiber nature,… More >

Shuai Wang, Zhihong Yu^*, Wenjie Zhang, Dongxu Zhao, Aorigele

Phyton-International Journal of Experimental Botany, Vol.91, No.11, pp. 2559-2582, 2022, DOI:10.32604/phyton.2022.021354

Abstract

Sunflower (Helianthus annuus L.) is one of the four major oil crops in the world and has high economic value. However, the lack of discrete element method (DEM) models and parameters for sunflower seeds hinders the application of DEM for computer simulation in the key working processes of sunflower seed sowing and harvesting. The present study was conducted on two varieties of sunflower, and the DEM model of sunflower seeds was established by using 3D scanning technology based on the distribution of triaxial dimensions and volumes of the geometric model of sunflower seeds. Similarly, the physical characteristics parameters of sunflower… More >