Farzad Jaliliantabar^1,2,*, Rizalman Mamat³, Sudhakar Kumarasamy^2,4,5

Energy Engineering, Vol.119, No.3, pp. 847-861, 2022, DOI:10.32604/ee.2022.019051

Abstract Thermal characteristics of phase change material (PCM) are important in design and utilization of thermal energy storage or other applications. PCMs have great latent heat but suffer from low thermal conductivity. Then, in recent years, nano particles have been added to PCM to improve their thermophysical properties such as thermal conductivity. Effect of this nano particles on thermophysical properties of PCM has been a question and many experimental and numerical studies have been done to investigate them. Artificial intelligence-based approach can be a good candidate to predict thermophysical properties of nano enhance PCM (NEPCM). Then, in this study an artificial… More >

XINWEI WU¹, GUOYONG JIA^2,*, HONGNA YANG³, CONGCONG SUN², YING LIU², ZENGYAN DIAO²

BIOCELL, Vol.46, No.2, pp. 471-478, 2022, DOI:10.32604/biocell.2021.015701

Abstract A progressive neurodegenerative disease, Alzheimer’s disease (AD). Studies suggest that highly expressed protein isoaspartate methyltransferase 1 (PCMT1) in brain tissue. In the current study, we explored the effects of neural stem cell-conditioned medium (NSC-CDM) on the PCMT1/MST1 pathway to alleviate Aβ_25-35-induced damage in SH-SY5Y cells. Our data suggested that Aβ25-35 markedly inhibited cell viability. NSC-CDM or Neural stem cell-complete medium (NSC-CPM) had a suppression effect on toxicity when treatment with Aβ_25-35, with a greater effect observed with NSC-CDM. Aβ_25-35 + NSC-CDM group exhibited an increase in PCMT1 expression. sh-PCMT1 markedly decreased cell proliferation and suppressed the protective role of NSC-CDM… More >

Ahmed J. Hamad^*, Fawziea M. Hussien, Johain J. Faraj

Energy Engineering, Vol.118, No.5, pp. 1483-1497, 2021, DOI:10.32604/EE.2021.016867

Abstract The fluctuation in drying temperature influences the food products’ quality and drying time significantly during the drying process using an indirect solar dryer. One of the effective methods to reduce these variations in the temperature is based on thermal storage materials to control the drying temperature. An experimental investigation is presented in this study to evaluate the performance of an indirect solar dryer with air double pass using multiple phase change materials (PCM) as thermal storage materials. Two PCMs with different melting points are used to store the available heat energy during peak sunshine periods and reduce the drying temperature… More >

I. Samylingam¹, Navid Aslfattahi², K. Kadirgama^1,*, Mahendran Samykano³, L. Samylingam⁴, R. Saidur^4,5

Energy Engineering, Vol.118, No.5, pp. 1253-1265, 2021, DOI:10.32604/EE.2021.016087

Abstract In this study, nanocomposite of ternary nitrate molten salt induced with MXene is developed. LiNO₃-NaNO₃-KNO₃ with wt% of 35:12:53 and 35:10:55 are produced and doped with MXene in the wt% of 0.2, 0.5, 1.0, and 1.5. FTIR result indicates the composites had no chemical reaction occurred during the preparation. UV-VIS analysis shows the absorption enhancement with respect to the concentration of MXene. Thermogravimetric analysis (TGA) was used to measure the thermal stability of the LiNO₃-NaNO₃-KNO₃ induced with MXene. The ternary molten salts were stable at temperature range of 600–700°C. Thermal stability increases with the addition of MXene. 1.5 wt% of… More >

Caixia Wang², Xiao Huang^1,*, Hongqing Chen², Weijie Liang²

Journal of Renewable Materials, Vol.9, No.7, pp. 1239-1252, 2021, DOI:10.32604/jrm.2021.014746

Abstract Currently, people pay more and more attention to the transitional resettlement of victims after various natural disasters. There is an urgent need for a large number of temporary houses to resettle the victims after natural disasters. Disaster-relief temporary houses (DTHs) played an important role in the post-disaster resettlement in the past, which can not only be produced on a large scale, but also can be quickly and conveniently erected, which were the main means to solve the problem of transitional resettlement. However, due to their temporary nature, there was no extra energy consuming system installed in the DTHs generally. Hence… More >

Bin Liu¹, Zhaodan Yang¹, Yahui Wang¹, Rachid Bennacer^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.1, pp. 37-47, 2017, DOI:10.3970/fdmp.2017.013.037

Abstract The dynamic thermal history of storage product system is related to the insulation and also to the inertia. Use a new porous media doped with nanofluid PCM to improve the system efficiency. The analysis of the porous sponge thickness with 8 mm, 16 mm and 20 mm, the integrated nanofluids with 0.1%, 0.15% and 0.2%, the mass of the PCM and the initial temperature of the stored product with -1°C, 4°C, 12°C is achieved in order to underline the advantages of the new saturated porous media (sponges) with the phase change material (PCM) /Al₂O₃-H₂O nanofluid. The carrots are used as… More >

Fabio Almeida^1,*, Wey H. Leong², Alan S. Fung²

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 20-20, 2019, DOI:10.32604/icces.2019.05573

Abstract An experimental study was performed to measure the convective heat transfer and thermal decay of a vertical PCM (Phase Change Material) panel. The PCM (soy wax) was enclosed in a thin acrylic shell with an insulated perimeter. The panel was heated to 70°C and allowed to cool by natural convection to room temperature. The experiment captured the transient thermal behaviour of the panel in free convection during liquid and solid phases, and during phase change. Near temperature field visualization and convective heat transfer measurements were obtained using Mach Zehnder Interferometry at one-minute intervals. Finite fringe interferograms were used to obtain… More >

Robert Plant^*, M. Ziad Saghir

The International Conference on Computational & Experimental Engineering and Sciences, Vol.21, No.1, pp. 18-18, 2019, DOI:10.32604/icces.2019.04980

Abstract Fluids have been used to maintain operational temperatures for machinery for as long as machines have been developed. Over time different mediums have been explored, such as oils and waxes. These different mediums have had varying impacts on the overall system such as improving the heat capacity but at the cost and strain on the system of requiring more pumping power. Some mediums, while they provide an improvement can also damage to the system itself over time with unwanted interactions such corrosion. In this paper we will examine the implementation and suspension into the working fluid of Micro Encapsulated Phase… More >

Y.-M. Guo¹

CMES-Computer Modeling in Engineering & Sciences, Vol.41, No.3, pp. 177-194, 2009, DOI:10.3970/cmes.2009.041.177

Abstract In this paper, for analyses of the rigid-plastic metal forming problems, a hybrid PCM/FEM is developed. By introducing a boundary layer of finite element in boundary domain of workpiece, unsatisfactory issue of the positivity conditions of boundary points can be avoided, and the complicated boundary conditions can be easily imposed with the boundary layer of finite element. A plane strain upsetting process is analyzed by using the hybrid PCM/FEM. More >

Mustapha FARAJI¹

FDMP-Fluid Dynamics & Materials Processing, Vol.13, No.1, pp. 19-36, 2017, DOI:10.3970/fdmp.2017.013.019

Abstract A two-dimensional numerical model that accounts for heat transfer by conduction and natural convection in the molten region of nano enhanced Phase Change Material (PCM) is performed. Numerical investigations were conducted using an enthalpy- porosity method in order to examine the impact of the dispersion of copper (CuO) nanoparticles on the heat source temperature and the effect on the heat sink secured working time and the melting rate. Results show that heat spreads more easily along the conducting plate and to the PCM and, consequently, the PCM melts rapidly and the heat source is efficiency cooled by the addition of… More >