Shueei-Muh Lin¹, Sen-Yung Lee², Yu-Sheng Lin³

CMES-Computer Modeling in Engineering & Sciences, Vol.23, No.3, pp. 175-186, 2008, DOI:10.3970/cmes.2008.023.175

Abstract The blade of a horizontal-axis wind power turbine is modeled as a rotating beam with pre-cone angles and setting angles. Based on the Bernoulli-Euler beam theory, without considering the axial extension deformation and the Coriolis forces effect, the governing differential equations for the bending vibration of the beam are derived. It is pointed out that if the geometric and the material properties of the beam are in polynomial forms, then the exact solution for the system can be obtained. Based on the frequency relations as revealed, without tedious numerical analysis, one can reach many general qualitative conclusions between the natural… More >

S. Sabchevski¹, I. Zhelyazkov², M. Thumm³, S. Illy⁴, B. Piosczyk⁵, T.-M. Tran^6,7, J. Gr. Pagonakis⁸

CMES-Computer Modeling in Engineering & Sciences, Vol.20, No.3, pp. 203-220, 2007, DOI:10.3970/cmes.2007.020.203

Abstract Computer aided design of powerful gyrotrons for electron cyclotron resonance heating and current drive of fusion plasmas requires adequate physical models and efficient software packages for analysis, comparison and optimization of their electron-optical systems through numerical experiments. In this paper, we present and discuss the current status of the simulation tools available to the researchers involved in the development of multi-megawatt gyrotrons for the ITER project, review some of their recent upgrades and formulate directions for further modifications and improvements. Illustrative examples used represent results from recent numerical investigations of real constructions. Some physical problems that are outside of the… More >

Antoine Fabre¹, Jordan Hristov^2*, Rachid Bennacer¹

FDMP-Fluid Dynamics & Materials Processing, Vol.12, No.2, pp. 69-85, 2016, DOI:10.3970/fdmp.2016.012.069

Abstract Closed form approximate solutions to nonlinear transient heat conduction with linear power-law k = k₀(1±βT^m) temperature-dependent thermal diffusivity have been developed by the integral-balance integral method under transient conditions. The solutions use improved direct approaches of the integral method and avoid the commonly used linearization by the Kirchhoff transformation. The main steps in the new solutions are improvements in the integration technique of the double-integration technique and the optimization of the exponent of the approximate parabolic profile with unspecified exponent. Solutions to Dirichlet boundary condition problem have been developed as examples by the classical Heat-balance Integral method (HBIM) and the… More >

M. Kriaa¹, M. El Alami^1,2, M. Najam¹, E. Semma³

FDMP-Fluid Dynamics & Materials Processing, Vol.7, No.2, pp. 125-140, 2011, DOI:10.3970/fdmp.2011.007.125

Abstract In this paper a numerical study of natural convection in a two dimensional convergent channel, with or without rectangular block, is carried out. The block is placed at the channel outlet and its thermal conductivity is set equal to that of air. One of channel planes is heated at constant temperature T_H. The other one is maintained cold at T_C < T_H. The governing equations are solved using a finite volume method and the SIMLEC algorithm for the velocity-pressure coupling is used. Special emphasis is given to detail the effect of the block size and Rayleigh number on the dynamics… More >

D. Srinivasacharya¹, G. Swamy Reddy¹

FDMP-Fluid Dynamics & Materials Processing, Vol.9, No.3, pp. 291-305, 2013, DOI:10.3970/fdmp.2013.009.291

Abstract Free convection and related heat and mass transfer along a vertical plate embedded in a power-law fluid saturated Darcy porous medium with thermal and solutal stratification effects is studied. The governing partial differential equations are transformed into ordinary differential equations using similarity transformations and then solved numerically by means of a shooting method. The variations of non-dimensional velocity, temperature and concentration are presented graphically for various values of the power-law index, and of the thermal and solutal stratification parameters. In addition, the heat and mass transfer rates are tabulated for different values of the governing nondimensional numbers. More >

CMC-Computers, Materials & Continua, Vol.52, No.2, pp. 123-131, 2016, DOI:10.3970/cmc.2016.052.123

Abstract In this paper, the gyrotropic bi-anisotropy of the chiral medium in substrate constitutive parameters (xc and hc) of a rectangular microstrip patch antenna is introduced in order to observe its effects on the complex resonant frequency and half-power bandwidth. The analysis is based on the full-wave spectral domain approach using the Moment Method, with sinusoidal type basis functions. The numerical calculations related to the dominant mode have been carried out, and it has been observed that the resonant frequency and the bandwidth are directly linked to the medium chirality. The new results can be considered as a generalisation form of… More >

Xiuqing Qian¹, Yanping Cao², Jianyu Zhang¹, Dierk Raabe², Zhenhan Yao³, Binjun Fei¹

CMC-Computers, Materials & Continua, Vol.7, No.1, pp. 33-42, 2008, DOI:10.3970/cmc.2008.007.033

Abstract In this work, an inverse approach based on depth-sensing instrumented indentation tests is proposed to determine the Young's modulus, yield strength and strain hardening exponent of the materials for which the elastoplastic part of the stress-strain curve can be described using a power function. Numerical verifications performed on typical engineering metals demonstrate the effectiveness of the new method. The sensitivity of the method to data noise and some experimental uncertainties are also discussed, which may provide useful information for the application of the method in practice. More >

B. Srivathsa¹, N. Ramakrishnan²

CMC-Computers, Materials & Continua, Vol.7, No.1, pp. 9-24, 2008, DOI:10.3970/cmc.2008.007.009

Abstract An analytical model, describing an explosive compaction process performed axially on a powder assembly of cylindrical geometry, is discussed. The powder is encapsulated in a cylindrical metal container surrounded by an explosive pad, which is detonated parallel to the major axis of the compact. The pressure generated in the powder is a function of the nature and the thickness of the explosive material as well as the powder characteristics. The model is based on the principle of shock propagation in powder aggregate and, the detonation as well as the refraction wave characteristics of the explosives. For the purpose of validation… More >

Yueping Wang^1,*, Xuan Zhang², Yixuan Zhang³

CMC-Computers, Materials & Continua, Vol.61, No.1, pp. 171-184, 2019, DOI:10.32604/cmc.2019.06204

Abstract Full-duplex (FD) has been recognized as a promising technology for future 5G networks to improve the spectrum efficiency. However, the biggest practical impediments of realizing full-duplex communications are the presence of self-interference, especially in complex cellular networks. With the current development of self-interference cancellation techniques, full-duplex has been considered to be more suitable for device-to-device (D2D) and small cell communications which have small transmission range and low transmit power. In this paper, we consider the full-duplex D2D communications in multi-tier wireless networks and present an analytical model which jointly considers mode selection, resource allocation, and power control. Specifically, we consider… More >

Yueyun Chen^1,*, Zhuo Zeng¹, Taohua Chen¹, Zushen Liu², Alan Yang³

CMC-Computers, Materials & Continua, Vol.60, No.2, pp. 835-853, 2019, DOI:10.32604/cmc.2019.07080

Abstract The communication reliability and system capacity are two of the key performance indicators for Internet of Vehicles (IoV). Existing studies have proposed a variety of technologies to improve reliability and other performance, such as channel selection and power allocation in Vehicle-to-Infrastructure (V2I). However, these researches are mostly applied in a single roadside unit (RSU) scenario without considering inter-cell interference (ICI) of multi-RSUs. In this paper, considering the distribution characteristics of multi-RSUs deployment and corresponding ICI, we propose a reliable uplink transmission scheme to maximize the total capacity and decrease the interference of multi-RSUs (mRSU-DI) in condition of the uplink interruption… More >