Tao Shen^1,*, Yukari Nagai¹, Chan Gao²

CMC-Computers, Materials & Continua, Vol.58, No.3, pp. 641-651, 2019, DOI:10.32604/cmc.2019.04885

Abstract Building structure is like the skeleton of the building, it bears the effects of various forces and forms a supporting system, which is the material basis on which the building depends. Hence building structure design is a vital part in architecture design, architects often explore novel applications of their technologies for building structure innovation. However, such searches relied on experiences, expertise or gut feeling. In this paper, a new design method for the optimal building frame column design based on the genetic algorithm is proposed. First of all, in order to construct the optimal model of the building frame column,… More >

Guoyuan Lin^1,2,*, Bowen Liu¹, Pengcheng Xiao³, Min Lei⁴, Wei Bi^5,6

CMC-Computers, Materials & Continua, Vol.57, No.3, pp. 533-547, 2018, DOI:10.32604/cmc.2018.03720

Abstract Anti-detection is becoming as an emerging challenge for anti-phishing. This paper solves the threats of anti-detection from the threshold setting condition. Enough webpages are considered to complicate threshold setting condition when the threshold is settled. According to the common visual behavior which is easily attracted by the salient region of webpages, image retrieval methods based on texton correlation descriptor (TCD) are improved to obtain enough webpages which have similarity in the salient region for the images of webpages. There are two steps for improving TCD which has advantage of recognizing the salient region of images: (1) This paper proposed Weighted… More >

Lianggui Liu^1,*, Wei Li¹, Huiling Jia¹

CMC-Computers, Materials & Continua, Vol.57, No.1, pp. 97-106, 2018, DOI:10.32604/cmc.2018.03511

Abstract With the rapid development of mobile communication all over the world, the similarity of mobile phone communication data has received widely attention due to its advantage for the construction of smart cities. Mobile phone communication data can be regarded as a type of time series and dynamic time warping (DTW) and derivative dynamic time warping (DDTW) are usually used to analyze the similarity of these data. However, many traditional methods only calculate the distance between time series while neglecting the shape characteristics of time series. In this paper, a novel hybrid method based on the combination of dynamic time warping… More >

Junjia Chen¹, Wei Lu^1,2,*, Yuileong Yeung¹, Yingjie Xue¹, Xianjin Liu¹, Cong Lin^1,3, Yue Zhang⁴

CMC-Computers, Materials & Continua, Vol.55, No.2, pp. 201-211, 2018, DOI:10.3970/cmc.2018.01781

Abstract In recent years, binary image steganography has developed so rapidly that the research of binary image steganalysis becomes more important for information security. In most state-of-the-art binary image steganographic schemes, they always find out the flippable pixels to minimize the embedding distortions. For this reason, the stego images generated by the previous schemes maintain visual quality and it is hard for steganalyzer to capture the embedding trace in spacial domain. However, the distortion maps can be calculated for cover and stego images and the difference between them is significant. In this paper, a novel binary image steganalytic scheme is proposed,… More >

R. Praveena¹, S. Nirmala²

CMC-Computers, Materials & Continua, Vol.53, No.1, pp. 37-47, 2017, DOI:10.3970/cmc.2017.053.039

Abstract DSP operation in a Biomedical related therapeutic hardware need to be performed with high accuracy and with high speed. Portable DSP hardware’s like pulse/heart beat detectors must perform with reduced operational power due to lack of conventional power sources. This work proposes a hybrid biomedical hardware chip in which the speed and power utilization factors are greatly improved. Multipliers are the core operational unit of any DSP SoC. This work proposes a LUT based unsigned multiplication which is proven to be efficient in terms of high operating speed. For n bit input multiplication n*n memory array of 2n bit size… More >

Lianhua Ma¹, Qingsheng Yang²

CMC-Computers, Materials & Continua, Vol.40, No.2, pp. 79-98, 2014, DOI:10.3970/cmc.2014.040.079

Abstract Honeycombs are widely used in aerospace structures due to their low density and high specific strength. In this paper, effective electromagnetic properties of irregular honeycombs are investigated, by using the three dimensional homogenization theory and corresponding computational procedure. This homogenization method, being the extension of two-scale asymptotic approach, is employed to determine the expressions of the effective dielectric permittivity, magnetic permeability and electrical conductivity. To verify and validate the proposed model and procedure, effective permittivities of a typical irregular honeycomb are studied and compared with those of semi-empirical formulae. Moreover, the effect of geometry of honeycomb's unit cell on effective… More >

Chyanbin Hwu¹, Tai-Liang Kuo²

CMC-Computers, Materials & Continua, Vol.36, No.2, pp. 135-153, 2013, DOI:10.3970/cmc.2013.036.135

Abstract The problems of the interface corners between two dissimilar anisotropic viscoelastic materials are studied in this paper. Through the use of the well-known correspondence principle between linear elasticity and linear viscoelasticity, fracture parameters in the Laplace domain can be obtained from the path-independent H-integral for the corresponding problems of anisotropic linear elastic materials. Further application of the correspondence relations for fracture parameters proposed in our recent study then leads us the solutions of fracture parameters in the time domain. To show the applicability and accuracy of the proposed method, several different kinds of numerical examples are presented such as a… More >

Bin Li¹, Guo-biao Yang¹, Qi-rong Zhu², Fan Ni²

CMC-Computers, Materials & Continua, Vol.21, No.2, pp. 107-118, 2011, DOI:10.3970/cmc.2011.021.107

Abstract In this paper, digital image correlation method (DICM) is employed to measure the shear behavior of the spot welding specimens and the ones using adhesive under quasi-static lap shear testing. The images of the specimens' surfaces are captured in real-time by CCD and corresponding computer system. DICM is subsequently used to obtained strain by correlating the images captured before and after deformation. Then, both force-displacement curves and stress-strain curves of the specimens including the cracking load are obtained. The results and analysis show that the mechanical properties of specimens using adhesive compared with the spot welding specimens have an obvious… More >

T. Nishioka¹, S. Tchouikov¹, T. Fujimoto¹

CMC-Computers, Materials & Continua, Vol.3, No.3, pp. 147-154, 2006, DOI:10.3970/cmc.2006.003.147

Abstract In this study, phenomena of multiple branching of dynamically propagating crack are investigated numerically. The complicated paths of cracks propagating in a material are simulated by moving finite element method based on Delaunay automatic triangulation (MFEM BODAT), which was extended for such problems. For evaluation of fracture parameters for propagating and branching cracks switching method of the path independent dynamic J integral was used. Using these techniques the generation phase simulation of multiple dynamic crack branching was performed. Various dynamic fracture parameters, which are almost impossible to obtain by experimental technique alone, were accurately evaluated. More >