Mingzhe Jiang¹, S. Nicole DeMass¹, D. Ross Economy², Thomas Shackleton¹, Christopher L. Kitchens^1*

Journal of Renewable Materials, Vol.4, No.5, pp. 377-387, 2016, DOI:10.7569/JRM.2016.634131

Abstract Spin coating was used to cast a uniform film of cellulose nanocrystals with low surface roughness and variable thickness as a function of operational parameters that include rotational speed and dispense suspension concentration. The film thickness was controllable from 40 nm up to 1 μm with surface roughness an order of magnitude less than blade-coating methods. The degree of radial orientation was qualitatively assessed and shown to be variable with processing parameters. Under specific processing conditions, the formation of striation patterns was observed and associated with film drying instability. The striation patterns are periodic in nature where the wavelength and… More >

Craig Clemons

Journal of Renewable Materials, Vol.4, No.5, pp. 327-339, 2016, DOI:10.7569/JRM.2016.634112

Abstract Continuous fibers are commonly manufactured for a wide variety of uses such as filters, textiles, and composites. For example, most fibrous reinforcements (e.g., carbon fiber, glass fiber) for advanced composites are continuous fibers or yarns, fabrics, and preforms made from them. This allows broad flexibility in design and manufacturing approaches by controlling fiber orientation and architecture. However, there has been growing interest in preparing continuous fibers from biobased materials such as plants. Of particular recent interest are nanocelluloses, which are projected to be less expensive than many other nanomaterials and have the potential to be produced in large volumes. They… More >

Idalba A. Hidalgo A.^∗, Felipe Sojo^†, Francisco Arvelo^†, Marcos A. Sabino^∗,‡

Molecular & Cellular Biomechanics, Vol.10, No.2, pp. 85-105, 2013, DOI:10.3970/mcb.2013.010.085

Abstract The electrospinning technique is a method used to produce nano and microfibers using the influence of electrostatic forces. Porous three dimensional networks of continuous and interconnected fibers as scaffolds were obtained from a poly (lactic acid) solution. The concentration of the polymeric solution, 12.5% m/w, as well as the conditions of voltage (V=11kV) and tip-metallic collector distance (H=13cm) were established to develop these scaffolds through the electrospinning process. The characteristics of the scaffolds, such as fiber diameter, sintering and the biomimetics of the characteristics of a native extra cellular matrix were verified by Scanning Electron Microscopy (SEM). The orientation induced… More >

G. Lasko^∗, I. Schäfer^∗, Z. Burghard^†, J. Bill^†, S. Schmauder^∗, U. Weber^∗, D. Galler^‡

Molecular & Cellular Biomechanics, Vol.10, No.1, pp. 27-42, 2013, DOI:10.3970/mcb.2013.010.027

Abstract Owing to the apparent simple morphology and peculiar properties, nacre, an iridescent layer, coating of the inner part of mollusk shells, has attracted considerable attention of biologists, material scientists and engineers. The basic structural motif in nacre is the assembly of oriented plate-like aragonite crystals with a ’brick’ (CaCO₃ crystals) and ’mortar’ (macromolecular components like proteins) organization. Many scientific researchers recognize that such structures are associated with the excellent mechanical properties of nacre and biomimetic strategies have been proposed to produce new layered nanocomposites. During the past years, increasing efforts have been devoted towards exploiting nacre’s structural design principle in… More >

Wangping Duan^∗, Lei Wei^†, Juntao Zhang^∗, Yongzhuang Hao^∗, Chunjiang Li^∗, Hao Li^∗, Qi Li^∗, Quanyou Zhang^‡, Weiyi Chen^‡, Xiaochun Wei^∗,§

Molecular & Cellular Biomechanics, Vol.8, No.4, pp. 253-274, 2011, DOI:10.3970/mcb.2011.008.253

Abstract The cytoskeleton network is believed to play an important role in the biomechanical properties of the chondrocyte. Ours and other laboratories have demonstrated that chondrocytes exhibit a viscoelastic solid creep behavior in vitro and that viscoelastic properties decrease in osteoarthritic chondrocytes. In this study, we aimed to understand whether the alteration of viscoelastic properties is associated with changes in cytoskeleton components of ageing chondrocytes from rabbit knee articular cartilage. Three age groups were used for this study: young (2-months-old, N=23), adult (8-months-old, N=23), and old (31-months-old, N=23) rabbit groups. Cartilage structure and proteoglycan and type II collagen content were determined… More >

Guanbin Song^∗,†, Toshiro Ohashi^†, Naoya Sakamoto^†, Masaaki Sato^†

Molecular & Cellular Biomechanics, Vol.3, No.2, pp. 61-68, 2006, DOI:10.3970/mcb.2006.003.061

Abstract Expression of adhesion molecules may play an important role in the interaction of tumor cells with vascular endothelial cells during tumor invasion and metastasis. In this study, the adhesive force of human hepatoma HepG2 cells to human umbilical vein endothelial cells (HUVECs) was investigated using a micropipette aspiration technique. Expression of an adhesion molecule, E-selectin, was also observed by immunofluorescence microscopy. In particular, the adhesive force after stimulation of HUVECs with recombinant human interleukin-1β (rhIL-1β) was examined. The results demonstrated that the adhesive force of HepG2 cells to stimulated HUVECs is significantly higher than that of unstimulated control cells, and… More >

Anju Pradeep¹, S. Mridula¹, P. Mohanan²

CMC-Computers, Materials & Continua, Vol.52, No.3, pp. 187-196, 2016, DOI:10.3970/cmc.2016.052.185

Abstract A highly compact chipless tag based on Frequency coding technique using Spiral Resonators is proposed in this paper. Spirals are well known metamaterial structures and thus capable of sharp resonance, and hence Spiral Resonators can serve as a good candidate for RF Identity Tags. The bit capacity of the proposed tag is 10 bits per sqcm. The prototype of the tag is fabricated on a low-cost substrate of dielectric constant 4.4 and loss tangent 0.02. The overall dimension of tag is 15.4 x 3 x 1.6 mm³. Two methods for reading the tags are also discussed in this paper. Scope… More >

Anusha Eldo¹, Balamati Choudhury²

CMC-Computers, Materials & Continua, Vol.52, No.3, pp. 143-157, 2016, DOI:10.3970/cmc.2016.052.142

Abstract The advances in metamaterial science and technology have raised the expectations of camouflage or stealth researchers to one order higher in terms of absorption characteristics. As metamaterial inspired radar absorbing structures are proving themselves as a good candidate with near unity absorption, feasibility towards hardware realization is necessary. Hence an extensive literature survey of metamaterial inspired radar absorbing structure has been carried out and reported in this paper along with the challenges and material issues. The various types of metamaterial structures that can be used as absorber have been provided along with simulation figures. To make the review more useful,… More >

Mohan Li¹, Yanbin Sun^{1, *}, Shen Su¹, Zhihong Tian¹, Yuhang Wang^{1, *}, Xianzhi Wang²

CMC-Computers, Materials & Continua, Vol.59, No.1, pp. 331-344, 2019, DOI:10.32604/cmc.2019.05379

Abstract Maliciously manufactured user profiles are often generated in batch for shilling attacks. These profiles may bring in a lot of quality problems but not worthy to be repaired. Since repairing data always be expensive, we need to scrutinize the data and pick out the data that really deserves to be repaired. In this paper, we focus on how to distinguish the unintentional data quality problems from the batch generated fake users for shilling attacks. A two-steps framework named DPIF is proposed for the distinguishment. Based on the framework, the metrics of homology and suspicious degree are proposed. The homology can… More >

A. Koba yashi¹, K. Suginuma², M. Furui chi¹

CMES-Computer Modeling in Engineering & Sciences, Vol.113, No.2, pp. 117-149, 2017, DOI:10.3970/cmes.2017.113.121

Abstract Triage is a method for determining the priority of patients’ treatment to improve survival rates. Different triage methods are used in hospitals, and they are applied after performing an evaluation based on standard methods such as the Japan Triage Acuity Scale (JTAS) or Emergency Severity Index (ESI). It is important to consider the characteristics of all the hospitals when assigning triage methods and emergency levels to them; the hospital managers make these decisions. We propose a multi-agent simulation method to support the hospital managers in employing the triage protocols according to their environment. We developed a prototype simulation system called… More >