Wu Feng^1,2,*, Tengku Anita Raja Hussin¹, Xu Yang³

Structural Durability & Health Monitoring, Vol.20, No.1, 2026, DOI:10.32604/sdhm.2025.071664 - 08 January 2026

Abstract This study investigates the thermo–mechanical behavior of C40 concrete and reinforced concrete subjected to elevated temperatures up to 700°C by integrating experimental testing and advanced numerical modeling. A temperature-indexed Concrete Damage Plasticity (CDP) framework incorporating bond–slip effects was developed in Abaqus to capture both global stress–strain responses and localized damage evolution. Uniaxial compression tests on thermally exposed cylinders provided residual strength data and failure observations for model calibration and validation. Results demonstrated a distinct two-stage degradation regime: moderate stiffness and strength reduction up to ~400°C, followed by sharp deterioration beyond 500°C–600°C, with residual capacity at… More >

Yuntian Wang^1,2, Taohua Liang^1,2, Yuan Zhou^1,2, Weimei Shi^1,2, Lijuan Huang^1,2, Yuzhu Guo^3,*

CMC-Computers, Materials & Continua, Vol.86, No.2, pp. 1-26, 2026, DOI:10.32604/cmc.2025.071624 - 09 December 2025

Abstract This investigation utilizes non-equilibrium molecular dynamics (NEMD) simulations to explore shock-induced spallation in single-crystal tantalum across shock velocities of 0.75–4 km/s and initial temperatures from 300 to 2000 K. Two spallation modes emerge: classical spallation for shock velocity below 1.5 km/s, with solid-state reversible Body-Centered Cubic (BCC) to Face-Centered Cubic (FCC) or Hexagonal Close-Packed (HCP) phase transformations and discrete void nucleation-coalescence; micro-spallation for shock velocity above 3.0 km/s, featuring complete shock-induced melting and fragmentation, with a transitional regime (2.0–2.5 km/s) of partial melting. Spall strength decreases monotonically with temperature due to thermal softening. Elevated temperatures More >

Meng Wang¹, Jay Fineberg², Alan Needleman^3,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.33, No.4, pp. 1-1, 2025, DOI:10.32604/icces.2025.011000

Abstract Brittle materials fail by means of rapid cracks. At their tips, tensile cracks dissipate elastic energy stored in the surrounding material to create newly fractured surfaces, precisely maintaining 'energy balance' by exactly equating the energy flux with dissipation. Using energy balance, fracture mechanics perfectly describes crack motions; accelerating from nucleation to their maximal speed of cR, the Rayleigh wave speed. A tensile crack speed greater than cR is generally considered impossible [1]. Recently, a new mode of tensile crack propagation faster than cR that is not incorporated in classical fracture mechanics has been predicted in… More >

Zheng Zhang¹, Gan-Yun Huang^1,*, Fei Shen^1,2, Liao-Liang Ke¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.33, No.4, pp. 1-2, 2025, DOI:10.32604/icces.2025.010965

Abstract Rolling element bearings are critical components in modern industrial machinery, with rolling contact fatigue (RCF) emerging as the predominant failure mode even under optimal installation, lubrication, and maintenance conditions [1–5]. In the paper, a phase field model coupling plasticity and fatigue is developed to investigate spalling behavior under RCF loading. Fatigue crack nucleation, propagation, and bifurcation can be effectively predicted using the phase field model based on theories of energy minimization [6–8]. A numerical framework is established by using the finite element method with an explicit integration scheme. The subsurface initiated spalling, the crack evolution, More >

Fan Sun^1,2, Yiwen Chen^2,3, Dingjun Li³, Rong Xu², Peng Jiang², Tiejun Wang², Lei Yang^1,2,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.33, No.1, pp. 1-1, 2025, DOI:10.32604/icces.2025.012370

Abstract The capacity to maintain operational temperatures within safe thresholds is paramount for the longevity of thermal barrier coating systems (TBCs). Nonetheless, TBC spallation during service can lead to localized over temperature, which may result in catastrophic failure. In this study, we examine the phenomenon of over temperature in locally spalled TBCs through a combination of numerical simulations and experimental investigations. We perform numerical calculations to determine the temperature distributions in locally spalled TBCs with varying spallation depths and diameters, and we analyze the correlation between the maximum temperature within the spalled regions and the dimensions… More >

Baishun Yang¹, Biao Li^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.32, No.3, pp. 1-1, 2024, DOI:10.32604/icces.2024.011944

Abstract Hot corrosion behavior of GH4169 nickel-based superalloy coated with 95wt.%Na₂SO₄+5wt.%NaCl salt mixture at 650 ℃,800 ℃, and 950 ℃ were investigated by some material characterization methods. The Experimental results showed that hot corrosion kinetics followed a parabolic, linear and exponential laws at 650 ℃, 800 ℃, and 950 ℃ respectively. Notably, as the temperature ascended from 650 ℃ to over 800 ℃, the corrosion mechanisms underwent a transition from pit corrosion to uniform erosion, corresponding to low-temperature hot corrosion (LTHC) and high-temperature hot corrosion (HTHC). At 650 ℃, a large number of semi-ellipsoidal corrosion pits manifested More >

Xueya Wang¹, Yiming Zhang^2,3,*, Qi Liu⁴, Huanran Wang¹

CMC-Computers, Materials & Continua, Vol.79, No.2, pp. 2907-2922, 2024, DOI:10.32604/cmc.2024.050736 - 15 May 2024

Abstract Concrete subjected to fire loads is susceptible to explosive spalling, which can lead to the exposure of reinforcing steel bars to the fire, substantially jeopardizing the structural safety and stability. The spalling of fire-loaded concrete is closely related to the evolution of pore pressure and temperature. Conventional analytical methods involve the resolution of complex, strongly coupled multifield equations, necessitating significant computational efforts. To rapidly and accurately obtain the distributions of pore-pressure and temperature, the Pix2Pix model is adopted in this work, which is celebrated for its capabilities in image generation. The open-source dataset used herein… More >

Shuaipeng Qi¹, Yongxing Shen^1,*

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.4, pp. 1-1, 2023, DOI:10.32604/icces.2023.09131

Abstract The local surface crack has already been the main reason that has great negative influence on the fatigue life and the resistance of foreign object damage of important equipment, such as the blades of aviation engine. Laser shock peening (LSP) is a very effective technology for metallic surface treatment, which has been widely used to overcome the negative influence of local surface crack. However, when LSP is applied to a thin specimen, an undesirable result spall fracture, which is close to the free surface inside the specimen, may occur.
The spall fracture phenomenon generated in LSP… More >

Fengchao Wu^1,*, Xuhai Li¹, Yi Sun¹, Yuanchao Gan¹, Huayun Geng¹, Yuying Yu¹, Jianbo Hu¹

The International Conference on Computational & Experimental Engineering and Sciences, Vol.26, No.3, pp. 1-1, 2023, DOI:10.32604/icces.2023.09320

Abstract The dynamical response of materials to multiple shock waves is a critical issue in shock physics and engineering applications. In this work, hydrodynamic simulations are used to investigate the shock-induced spall failure and subsequent recompression characteristics of tin, under the implementation of a multiphase equation of state, multi-phase constitutive relations, and a damage model. As within experiments, double shock loadings in simulations are driven by layered impactors with different shock impedances. In general, our numerical calculations agree well with recent tin spall experiments and reproduce the free surface velocity characteristics. Interesting dynamic behaviors such as… More >

R. R. Valisetty¹, A. M. Dongare², A. M. Rajendran³, R. R. Namburu¹

CMC-Computers, Materials & Continua, Vol.44, No.1, pp. 23-57, 2014, DOI:10.3970/cmc.2014.044.023

Abstract Materials used in soldier protective structures, such as armor, vehicles and civil infrastructures, are being improved for performance in extreme dynamic environments. Accordingly, atomistic molecular dynamics simulations were performed to study the spall response in a single crystal aluminum atom system. A planar 9.6 picoseconds (ps) shock pulse was generated through impacts with a shock piston at velocities ranging from 0.6 km/s to 1.5 km/s in three <1,0,0>, <1,1,0>, and <1,1,1> crystal orientations. In addition to characterizing the transient spall region width and duration, the spall response was characterized interms of the traditional axial stress vs. axial… More >