Yan Song^1,2, Zhixin Wang³, Xin Zhang⁴, Rong Zhang¹, Jinchun Li^1,2,*

Journal of Renewable Materials, Vol.9, No.5, pp. 943-957, 2021, DOI:10.32604/jrm.2021.014131

Abstract Lignin is a natural biopolymer with a complex three-dimensional network, commercially obtained from waste liquid of paper pulp and bioethanol production, and could be a candidate for preparation of environment-friendly bio-based polyphenol material. In the present work, the demethylated wheat straw alkali lignin (D-Lig), prepared by demethylation of wheat straw alkali lignin (Lig) using an in-situ generated Lewis acid, was used to synthesize bio-based phenol formaldehyde resin adhesive (D-LPF) applied in plywood. Effects of synthetic process’s factors, including lignin substitution for phenol, NaOH concentration and molar ratio of formaldehyde to phenol, on the bonding strength and free formaldehyde content of… More >

Yuanyuan Liu^1,2, Shuo Zhang¹, Haiye Yu³, Yueyong Wang^4,*, Yuehan Feng¹, Jiahui Sun¹, Xiaokang Zhou¹

CMC-Computers, Materials & Continua, Vol.66, No.1, pp. 247-262, 2021, DOI:10.32604/cmc.2020.012328

Abstract Intelligent straw coverage detection plays an important role in agricultural production and the ecological environment. Traditional pattern recognition has some problems, such as low precision and a long processing time, when segmenting complex farmland, which cannot meet the conditions of embedded equipment deployment. Based on these problems, we proposed a novel deep learning model with high accuracy, small model size and fast running speed named Residual Unet with Attention mechanism using depthwise convolution (RADw–UNet). This algorithm is based on the UNet symmetric codec model. All the feature extraction modules of the network adopt the residual structure, and the whole network… More >

Nikolajs Vedernikovs^*

Journal of Renewable Materials, Vol.8, No.6, pp. 661-674, 2020, DOI:10.32604/jrm.2020.09274

Abstract The main principles of the technological realisation of the furfural obtaining process have been formulated by Ricard [1]. Based on his recommendations, all investigators proceeded from the assumption that the depolymerisation of pentosans and the dehydration of pentoses in the one-step production of furfural from raw plant material must be accelerated with diluted catalyst solutions. According to this theory, uniform impregnation of the raw material with a catalyst solution is considered necessary. The reduction in the amount of the catalyst solution down to 30–40% of the mass of the dry raw material, suggested by Miner et al. [2], made the… More >

Kokoette Effiong¹, Jing Hu¹, Caicai Xu¹, Tao Tang¹, Haomin Huang², Jiangning Zeng^1,3, Xi Xiao^1,3,4,*

Journal of Renewable Materials, Vol.8, No.5, pp. 461-483, 2020, DOI:10.32604/jrm.2020.09111

Abstract The use of agricultural straw for algal bloom control has been studied for more than 30 years. In this article, we have reviewed the promising potentials of using agricultural straw as source of anti-algal agents, including the effectiveness of each major straw type so far used in this regard, and the investigated algal species. Various pre-treatment methods have also been widely reviewed. Signifi- cant progress has been made in natural product chemistry and molecular biology with regards to agricultural straw, especially in relation to the extraction of antialgal allelochemicals, degradation processes of agricultural straws and the mechanisms through which these… More >

Bahaa T. Shawky¹, Mohammed Nagah¹, Mosad A. Ghareeb², Gamal M. El-Sherbiny³, Saad A. M. Moghannem³, Mohamed S. Abdel-Aziz^1,*

Journal of Renewable Materials, Vol.7, No.7, pp. 667-682, 2019, DOI:10.32604/jrm.2019.04524

Abstract Rice straw (RS) collected from Egyptian agricultural environment (Al-Masied village-Alsharqia Governorate-Egypt) was used as substrate for three fungal isolates namely: 4b, 1Asp, Pleurotus ostreatus NRRL 3501 and mixed culture of (4b, 1Asp). Isolates number 4b and 1Asp were identified using the molecular technique (18S rRNA). Isolate 4b and 1Asp, were identified as Trichoderma saturnisporum MN1-EGY and Aspergillus niger MN2-EGY, respectively. Trichoderma saturnisporum MN1-EGY extract exhibited the highest antimicrobial activity compared to the other fungal extracts. Total phenolic, antimicrobial and antioxidant activities were also determined from the ethyl acetate extract of rice straw inoculated by these fungi. The antioxidant scavenging concentration(SC50)… More >

Ingrid Souza Vieira da Silva¹, Natália Soares Prado¹, Patrícia Gontijo de Melo², Danilo Campion Arantes³, Mara Zeni Andrade⁴, Harumi Otaguro¹, Daniel Pasquini^1,*

Journal of Renewable Materials, Vol.7, No.1, pp. 73-87, 2019, DOI:10.32604/jrm.2019.00042

Abstract In this work, nine different types of edible coating based on pectin, cellulose nanocrystals, glycerol, and essential oil of lemongrass were prepared and used to coat strawberries with a film formed directly on the surface of the coated fruit. The effects of the different edible coatings on refrigerated fruits in terms of weight loss, titratable acidity, total soluble solids, pH, and anthocyanin content was evaluated after 2 days, 4 days, 6 days, and 8 days of storage. Application of the edible coatings reduced the weight loss of the coated strawberries and the anthocyanin content. The total soluble solids content of… More >

Marcin Masłowski*, Justyna Miedzianowska and Krzysztof Strzelec

Journal of Renewable Materials, Vol.6, No.7, pp. 746-754, 2018, DOI:10.32604/JRM.2018.00121

Abstract Novel elastomer biocomposites based on straw fibers (raw or chemically modified) as reinforcing elements of natural rubber (NR) were reported and studied. Oat straw fibres with different average lengths were used. Lignocellulose materials were incorporated into the elastomer, before and after chemical surface modification involving sodium hydroxide. Fourier transform infrared spectroscopy (FTIR) and microscopy techniques were employed for characterization of fillers. The kinetics of rubber mixtures, as well as rheometric properties of compounds were determined. The cross-linking density was executed on the basis of equilibrium solvent-swelling measurements applying the modified Flory–Rehner equation. The morphology of biocomposites samples was analyzed by… More >