RITESH D. BHATT, JIGNESH P. PATEL, PARSOTAM H. PARSANIA^*

Journal of Polymer Materials, Vol.39, No.1-2, pp. 37-53, 2022, DOI:10.32381/JPM.2022.39.1-2.3

Abstract Compression-molded epoxy methacrylate of bisphenol-C-jute/treated jute-banana/groundnut/ cane sugar/pineapple leaf/rice husk/wheat husk sandwich composites were fabricated under 5 MPa pressure at room temperature for 3 h. Alkali treated jute-natural fiber sandwich composites displayed considerably improved mechanical properties over untreated jute-natural fiber sandwich composites due to surface modification of the jute fibers. Both types of sandwich composites showed high water uptake tendency, excellent hydrolytic stability against acids, alkali, and salt solutions, and also a longer equilibrium time at 30o C. Alkali treated sandwich composites revealed a considerably lower water uptake tendency than untreated sandwich composites. Observed water uptake trend is H₂ SO₄… More >

HADIMANI SHIVAKUMAR¹, GURUMURTHY G. D.¹, BOMMEGOWDA K. B.², S. PARAMESHWARA³

Journal of Polymer Materials, Vol.40, No.1-2, pp. 93-103, 2023, DOI:10.32381/JPM.2023.40.1-2.8

Abstract Polymer composites are increasing in demand in energy storage applications including in the electronic as well as electrical industries due to the ease of processing of these materials with associated advantages like light weight, corrosion resistance, and high mechanical strength. In this investigation, efforts are made to enhance the charging and discharging properties of epoxy/carbon fabric composite by the addition of graphene nanoplatelets (GNPs) into the epoxy/ carbon matrix. The performance of the composites with graphene platelets of 0.5 to 5 wt. % in epoxy were characterized and 1wt.% percolation threshold was observed poor performance in gravimetric charge and discharge… More >

S. ARULMURUGAN^a,*, N. VENKATESHWARAN^a, S. KUMAR^a, P. CHANDRASEKAR^a

Journal of Polymer Materials, Vol.40, No.1-2, pp. 83-91, 2023, DOI:10.32381/JPM.2023.40.1-2.7

Abstract In this research, the effect of UV light on the mechanical properties of jute polymer nanocomposites was evaluated. Due to the fact that photodegradation is a surface process and is confined to the degradation of the mechanical characteristics of polyester resin, this study focuses on the resin quality. Therefore, test samples comprised of fibre-reinforced polyester nanoclay composites were fabricated different weight ratios of nanoclay. They were put through UV exposure in an Ultraviolet (UV) chamber. Tensile testing samples were made in accordance with ASTMD638 and had a minimum thickness of 3 mm. Additionally, specimens for Flexural and Impact testing were… More >

B. BRAILSON MANSINGH¹, K. L. NARASIMHAMU², K. C. VARAPRASAD³, J. S. BINOJ^4,*, A. RADHAKRISHNAN⁵, ALAMRY ALI⁶

Journal of Polymer Materials, Vol.40, No.1-2, pp. 71-82, 2023, DOI:10.32381/JPM.2023.40.1-2.6

Abstract Several agro-wastes are rich in natural fibers and finds scope to be used as reinforcement in composite industry. These natural fibers have some advantages over man-made fibers, including low cost, light weight, renewable nature, high specific strength and modulus, and availability in various forms worldwide. In this paper, the effect of surface modification of leaf sheath coconut fiber (LSF) (an agro-waste) reinforced in phenol formaldehyde matrix composites with silicon carbide (SiC) nano particles as filler material were investigated for its mechanical characteristics. The investigation portrays that coconut LSF (CLSF) modified with potassium permanganate reinforced polymer composite with SiC nano particles… More >

FOUED KHOFFI^1,*, OMAR HARZALLAH², JEAN YVES DREAN²

Journal of Polymer Materials, Vol.40, No.1-2, pp. 59-69, 2023, DOI:10.32381/JPM.2023.40.1-2.5

Abstract The aim of this study is to analyze the interfacial and the frictional properties of copper (Cu) reinforced polyethylene terephthalate (PET) filament. This Cu-Embedded PET filament will be used as an information transmitter. This filament was prepared by a co-extrusion process. Mechanical properties of these filaments have been quantified by tensile and pull-out analyses. It is shown that the mechanical properties of composite filament were improved by adding the copper filament (from 0.82 to 1.2 GPa). The results of the pull-out test revealed some adhesion between the copper and the PET despite the existence of a slippage of the copper… More >

Zhongping Chen, Weigong Zhang^*

Structural Durability & Health Monitoring, Vol.18, No.2, pp. 111-124, 2024, DOI:10.32604/sdhm.2023.043563

Abstract Automatic control technology is the basis of road robot improvement, according to the characteristics of construction equipment and functions, the research will be input type perception from positioning acquisition, real-world monitoring, the process will use RTK-GNSS positional perception technology, by projecting the left side of the earth from Gauss-Krueger projection method, and then carry out the Cartesian conversion based on the characteristics of drawing; steering control system is the core of the electric drive unmanned module, on the basis of the analysis of the composition of the steering system of unmanned engineering vehicles, the steering system key components such as… More >

R. J. Johnson^∗, R. Pitchumani^†

Frontiers in Heat and Mass Transfer, Vol.1, No.1, pp. 1-9, 2010, DOI:10.5098/hmt.v1.1.3007

Abstract Much research is currently being performed with carbon nanotube additives to neat resin systems to enhance properties such as thermal and electrical conductivity, strength, modulus and damping. Fabrication of parts based on carbon nanotube filled resin systems requires information on their cure kinetics and rheology, which has been relatively less studied so far. This work presents an extensive experimental study that systematically characterizes the cure kinetics and viscosity as a function of degree of cure and temperature of EPON 815C/EPICURE 3274 epoxy resin system laden with carbon nanotubes. Studies are conducted to determine the effects of the carbon nanotube loading… More >

Patrick H. Oosthuizen^*, Jane T. Paul

Frontiers in Heat and Mass Transfer, Vol.1, No.1, pp. 1-8, 2010, DOI:10.5098/hmt.v1.1.3006

Abstract Natural convective heat transfer from narrow vertical plates which have a uniform surface heat flux has studied. With a narrow plate the heat transfer rate is dependent on the flow near the vertical edges of the plate. The magnitude of the edge effects will depend on the conditions existing near the edges of the plate. Three situations have here been considered these being a heated plate imbedded in a large plane adiabatic surface, the surfaces of the heated plane and the adiabatic surface being in the same plane, a heated plate with plane adiabatic surfaces above and below the heated… More >

Yamixa Delgado^1,*, Caliani Gaytan¹, Naydi Perez², Eric Miranda³, Bryan Colón Morales¹, Mónica Santos¹

Congenital Heart Disease, Vol.19, No.1, pp. 19-31, 2024, DOI:10.32604/chd.2024.046339

Abstract Background: Given the pervasive issues of obesity and diabetes both in Puerto Rico and the broader United States, there is a compelling need to investigate the intricate interplay among body mass index (BMI), pregestational, and gestational maternal diabetes, and their potential impact on the occurrence of congenital heart defects (CHD) during neonatal development. Methods: Using the comprehensive System of Vigilance and Surveillance of Congenital Defects in Puerto Rico, we conducted a focused analysis on neonates diagnosed with CHD between 2016 and 2020. Our assessment encompassed a range of variables, including maternal age, gestational age, BMI, pregestational diabetes, gestational diabetes, hypertension,… More >

Jae Hong Lee¹, Sungkyu Cho^2,*, Jae Gun Kwak², Hye Won Kwon², Woong-Han Kim², Mi Kyoung Song³, Sang-Yun Lee³, Gi Beom Kim³, Eun Jung Bae³

Congenital Heart Disease, Vol.19, No.1, pp. 69-83, 2024, DOI:10.32604/chd.2024.045137

Abstract Background: The optimal surgical timing and clinical outcomes of ventricular septal defect (VSD) closure in neonates remain unclear. We aimed to evaluate the clinical outcomes of VSD closure in neonates (age ≤ 30 days). Methods: We retrospectively reviewed 50 consecutive neonates who underwent VSD closure for isolated VSDs between August 2003 and June 2021. Indications for the procedure included congestive heart failure/failure to thrive and pulmonary hypertension. Major adverse events (MAEs) were defined as the composite of all-cause mortality, reoperation, persistent atrioventricular block, and significant (≥grade 2) valvular dysfunction. Results: The median age and body weight at operation were 26.0… More >