R. Chithra Devi^1,*, D. Jemi Florinabel², Narayanan Prasanth³

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 1527-1540, 2022, DOI:10.32604/cmc.2022.019343

Abstract The high-performance computing paradigm needs high-speed switching fabrics to meet the heavy traffic generated by their applications. These switching fabrics are efficiently driven by the deployed scheduling algorithms. In this paper, we proposed two scheduling algorithms for input queued switches whose operations are based on ranking procedures. At first, we proposed a Simple 2-Bit (S2B) scheme which uses binary ranking procedure and queue size for scheduling the packets. Here, the Virtual Output Queue (VOQ) set with maximum number of empty queues receives higher rank than other VOQ’s. Through simulation, we showed S2B has better throughput performance than Highest Ranking First… More >

Mohammad Sh. Daoud¹, Areej Fatima², Waseem Ahmad Khan³, Muhammad Adnan Khan^4,5,*, Sagheer Abbas³, Baha Ihnaini⁶, Munir Ahmad³, Muhammad Sheraz Javeid⁷, Shabib Aftab³

CMC-Computers, Materials & Continua, Vol.70, No.1, pp. 109-121, 2022, DOI:10.32604/cmc.2022.019295

Abstract The numbers of multimedia applications and their users increase with each passing day. Different multi-carrier systems have been developed along with varying techniques of space-time coding to address the demand of the future generation of network systems. In this article, a fuzzy logic empowered adaptive backpropagation neural network (FLeABPNN) algorithm is proposed for joint channel and multi-user detection (CMD). FLeABPNN has two stages. The first stage estimates the channel parameters, and the second performs multi-user detection. The proposed approach capitalizes on a neuro-fuzzy hybrid system that combines the competencies of both fuzzy logic and neural networks. This study analyzes the… More >

Wei Chen^1,2, Qiuju Zhang^1,2,*, Han Cao^1,2, Ye Yuan^1,2

Journal of Renewable Materials, Vol.10, No.2, pp. 329-358, 2022, DOI:10.32604/jrm.2022.016374

Abstract The aim of this article was to comprehensively evaluate the manufacturing process, tensile properties and fatigue resistance of the chopped and continuous fiber reinforced thermoplastic composites (CFRTPCs) by 3D printing. The main results included: the common defects of the printed CFRTPCs contained redundant and accumulation defects, scratch and warping defects; the continuous fiber contributed to the dimensional stability and accuracy of width and thickness; associations between mass percentage of fiber reinforcement and the averages of elastic modulus, strain at break and ultimate tensile strength were approximately linear based on tensile test results; the fatigue resistance improved with the increasing fiber… More > Graphic Abstract

Ye Tian^1,2, Yang Yang^1,*, Han Yang³, Ze Ji⁴

Computer Systems Science and Engineering, Vol.39, No.3, pp. 403-414, 2021, DOI:10.32604/csse.2021.016357

Abstract To model a true three-dimensional (3D) display system, we introduced the method of voxel molding to obtain the stereoscopic imaging space of the system. For the distribution of each voxel, we proposed a four-dimensional (4D) Givone–Roessor (GR) model for state-space representation—that is, we established a local state-space model with the 3D position and one-dimensional time coordinates to describe the system. First, we extended the original elementary operation approach to a 4D condition and proposed the implementation steps of the realization matrix of the 4D GR model. Then, we described the working process of a true 3D display system, analyzed its… More >

T. Prabhu^1,*, S. Chenthur Pandian²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 2549-2562, 2021, DOI:10.32604/cmc.2021.018793

Abstract This paper proposes, demonstrates, and describes a basic T-shaped Multi-Input and Multi-Output (MIMO) antenna with a resonant frequency of 3.1 to 10.6 GHz. Compared with the U-shaped antenna, the mutual coupling is minimized by using a T-shaped patch antenna. The T-shaped patch antenna shapes filter properties are tested to achieve separation over the 3.1 to 10.6 GHz frequency range. The parametric analysis, including width, duration, and spacing, is designed in the MIMO applications for good isolation. On the FR4 substratum, the configuration of MIMO is simulated. The appropriate dielectric material ɛ_r = 4.4 is introduced using this contribution and application… More >

Nidhi Kalra^1,*, Raman Kumar Goyal¹, Anshu Parashar¹, Jaskirat Singh¹, Gagan Singla²

CMC-Computers, Materials & Continua, Vol.69, No.2, pp. 1967-1978, 2021, DOI:10.32604/cmc.2021.018732

Abstract Every 24 seconds, someone dies on the road due to road accidents and it is the 8th leading cause of death and the first among children aged 15–29 years. 1.35 million people globally die every year due to road traffic crashes. An additional 20–50 million suffer from non-fatal injuries, often resulting in long-term disabilities. This costs around 3% of Gross Domestic Product to most countries, and it is a considerable economic loss. The governments have taken various measures such as better road infrastructures and strict enforcement of motor-vehicle laws to reduce these accidents. However, there is still no remarkable reduction… More >

Lukas Minder¹, Markus Schwerzmann^1,2, Thomas Radtke^1,3, Hugo Saner¹, Prisca Eser¹, Matthias Wilhelm¹, Jean-Paul Schmid^1,4,*

Congenital Heart Disease, Vol.16, No.6, pp. 597-608, 2021, DOI:10.32604/CHD.2021.016031

Abstract Objective: To extend our knowledge on tolerance of acute high-altitude exposure and hemodynamic response to exercise in adolescents with congenital heart disease (AscCHD) without meaningful clinical or functional restriction. Methods: A symptom limited cardiopulmonary exercise stress test and a non-invasive cardiac output measurement during steady state exercise were performed at 540 m and at 3454 m a.s.l. Symptoms of acute mountain sickness were noted. Results: We recruited 21 healthy controls and 16 AscCHD (59% male, mean age 14.7 ± 1.1 years). Three subjects (2 controls, 1 AscCHD) presented light symptoms of acute mountain sickness (dizziness and headache). During the symptom… More >

Adnan Bin Amanat Ali¹, Vasaki Ponnusamy¹, Anbuselvan Sangodiah¹, Roobaea Alroobaea², N. Z. Jhanjhi^3,*, Uttam Ghosh⁴, Mehedi Masud²

Intelligent Automation & Soft Computing, Vol.29, No.2, pp. 571-585, 2021, DOI:10.32604/iasc.2021.015913

Abstract Most smartphone users prefer easy and convenient authentication without remembering complicated passwords or drawing intricate patterns. Preferably, after one-time authentication, there is no verification of the user’s authenticity. Therefore, security and privacy against unauthorized users is a crucial research area. Behavioral authentication is an emerging security technique that is gaining attention for its uniqueness and transparency. In this paper, a behavior-based authentication system is built using swipe movements to continuously authenticate the user after one-time traditional authentication. The key feature is the selection of an optimal feature set for the swipe movement. Five machine learning classifiers are used, of which… More >

Wenjun Gao¹, Yang Yang^1,*, Hongtao Duan¹, Mingsheng Li¹, Jinrong Ma¹, Songwei Jin²

Computer Systems Science and Engineering, Vol.39, No.1, pp. 69-85, 2021, DOI:10.32604/csse.2021.016475

Abstract The two-dimensional (2-D) system has a wide range of applications in different fields, including satellite meteorological maps, process control, and digital filtering. Therefore, the research on the stability of 2-D systems is of great significance. Considering that multiple systems exist in switching and alternating work in the actual production process, but the system itself often has external perturbation and interference. To solve the above problems, this paper investigates the output feedback robust H_∞ stabilization for a class of discrete-time 2-D switched systems, which the Roesser model with uncertainties represents. First, sufficient conditions for exponential stability are derived via the average… More >

Naveen Kumar Seerangan^1,*, S. Vijayaragavan Shanmugam²

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 819-830, 2021, DOI:10.32604/cmc.2021.012135

Abstract Root-cause identification plays a vital role in business decision making by providing effective future directions for the organizations. Aspect extraction and sentiment extraction plays a vital role in identifying the root-causes. This paper proposes the Ensemble based temporal weighting and pareto ranking (ETP) model for Root-cause identification. Aspect extraction is performed based on rules and is followed by opinion identification using the proposed boosted ensemble model. The obtained aspects are validated and ranked using the proposed aspect weighing scheme. Pareto-rule based aspect selection is performed as the final selection mechanism and the results are presented for business decision making. Experiments… More >