JEEMOL. P. A¹, SURESH MATHEW¹, REGHUNADHAN NAIR C.P.^2,*

Journal of Polymer Materials, Vol.39, No.1-2, pp. 111-120, 2022, DOI:10.32381/JPM.2022.39.1-2.7

Abstract Polyether telechelics based on ethylene glycol,1,2-propylene glycol and 1,4- butylene glycol of with various molar masses and bearing at both terminals functional groups such as maleimide, itaconimide, nadimide and hydroxyl groups were individually examined as toughening agents for an unsaturated polyester resin (UPER). For a given telechelic, the toughening effect was evaluated at different mass ratios. The difference in toughening efficacy arose from the differential reactivity of the telechelics end groups combined with the unsaturation of the UPER with the reactive diluent, styrene. This causes a differential distribution of the polyether groups in the UPER matrices, resulting in a differential… More >

Marwah Subhi Attallah, Reem Alaa Mohammed^*, Ruaa Haitham Abdel-Rahim

FDMP-Fluid Dynamics & Materials Processing, Vol.19, No.10, pp. 2449-2469, 2023, DOI:10.32604/fdmp.2023.027750

Abstract This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells, walnut shells, and carbon fibers dispersed in a polyester matrix. MINITAB (L16) Taguchi experiments were used to determine the optimal combination of parameters. In particular, an erosion device consisting of a motor with a constant flow rate of 45 L/min, a pump with a diameter of 40 mm, a nozzle with a diameter of 5 mm, and a tank made of “perspex glass” 55 cm long, 30 cm tall, and 25 cm wide was used. The tests were conducted by varying the sample-to-nozzle distance, the… More > Graphic Abstract