S.H. Hassan^1,2, Lee Hwei Voon^1*, T.S. Velayutham^2*, Lindong Zhai³, Hyun Chan Kim³, Jaehwan Kim³

Journal of Renewable Materials, Vol.6, No.1, pp. 1-25, 2018, DOI:10.7569/JRM.2017.634173

Abstract Cellulose is a renewable biomass material and natural polymer which is abundantly available on Earth, and includes agricultural wastes, forestry residues, and woody materials. The excellent and smart characteristics of cellulose materials, such as lightweight, biocompatibility, biodegradability, high mechanical strength/stiffness and low thermal expansibility, have made cellulose a high-potential material for various industry applications. Cellulose has recently been discovered as a smart material in the electroactive polymers family which carries the name of cellulose-based electroactive paper (EAPap). The shear piezoelectricity in cellulose polymers is able to induce large displacement output, low actuation voltage, and low power consumption in the application… More >

Enzo Alvarado-Cordero¹, Gabriela Montes de Oca-Vásquez², Reinaldo Pereira-Reyes², José Vega-Baudrit², Marianelly Esquivel-Alfaro^1*

Journal of Renewable Materials, Vol.5, No.3-4, pp. 323-331, 2017, DOI:10.7569/JRM.2017.634123

Abstract Biodegradable polymers from renewable resources are generating growing interest in the plastic industry because they have properties similar to synthetic polymers. Polyhydroxyalkanoates, mainly polyhydroxybutyrate (PHB), have mechanical and physicochemical properties very similar to their synthetic counterparts. This work explores the use of residual glycerol from the bioenergy industry for the production of PHB by Bacillus megaterium DSM 32. The glycerol works as a source of carbon and energy. Raw glycerol was purified with sulfuric acid in order to neutralize saponified fatty acids. The purification process generated three different phases. One of the phases was the glycerol-rich layer; this layer was… More >

Abha Dubey^1*, Anuradha Mishra²

Journal of Renewable Materials, Vol.5, No.1, pp. 54-61, 2017, DOI:10.7569/JRM.2016.634127

Abstract Biosorption effectively removes heavy metal ions by using inexpensive biosorbents. In this study, Portulaca oleracea plant waste biomass was used as environmentally friendly biosorbent for the removal of copper ions from aqueous solution. This article includes the study of the effects of various important parameters on the biosorption process. Maximum biosorption was found to occur under slightly acidic conditions (pH 6). Small particle size, moderate agitation speed, and moderate temperature favor the biosorption process. The Langmuir model was most suitable, showing the biosorption capacity to be 85.470 mg/g. Pseudo-secondorder model best described the kinetics of the biosorption process. Thermodynamic studies… More >