Xiaojian Chen¹, Wenrui Yao¹, Feifei Gao¹, Dingyuan Zheng¹, Qiong Wang³, Jun Cao^2,*, Haiyan Tan¹, Yanhua Zhang^1,2,*

Journal of Renewable Materials, Vol.9, No.5, pp. 979-992, 2021, DOI:10.32604/jrm.2021.014751

Abstract The morphology and properties of corn starch and cassava starch were compared by SEM, DSC and TGA. The effects of amylose and amylopectin content on starch properties were studied by FT-IR, XRD and XPS. The plywood was pressed with the prepared adhesive and the bonding strength of the plywood was tested to analyze the difference among the adhesives from different plant sources and the difference after blending PAPI prepolymer. FT-IR results showed that the hydroxyl peak of cassava starch was stronger and wider. TGA showed that the residue of cassava starch was lower, but the thermal stability of cassava starch… More >

Hui Zhan^1,2, Zhaohui Niu¹, Lixia Yu¹, Maobiao Li¹, Changming Wang¹, Shuguang Wang^1,*

Journal of Renewable Materials, Vol.9, No.5, pp. 1031-1043, 2021, DOI:10.32604/jrm.2021.014109

Abstract The durability of bamboo based on its chemical and mechanical properties is a crucial consideration for the wood-based industry due to its vulnerability to insects and microorganisms. We investigated the dynamic changes of chemical and mechanical properties of Phyllostachys edulis under air-dry and water storage conditions for 3, 6 and 12 months respectively. The chemical properties of P. edulis bamboo culms varied with culm age but insignificantly with culm height. The mechanical properties of P. edulis culms showed an increasing trend with culm age. Water storage condition decreased the ash, SiO₂ and lignin content, but increased the ethanol-benzene extracts. It… More >

Kai Sheng¹, Saichao Wei¹, Jun Mei^1,2,3,4,*, Jing Xie^1,2,3,4,*

Phyton-International Journal of Experimental Botany, Vol.90, No.1, pp. 291-305, 2021, DOI:10.32604/phyton.2020.012985

Abstract Low-temperature storage is extensively used to optimize the postharvest life of various fresh fruits. However, red pitahaya (Hylocereus polyrhizus) fruits are sensitive to chilling injury (CI), which leads to the limitation of low-temperature storage. In this study, red pitahaya fruits were stored at 2, 4, 6, 8, and 10°C, respectively, for 27 days to determine the appropriate storage temperature. During the storage of red pitahaya fruits, storage at 8°C was more effective in suppressing decay and maintaining quality than other low temperatures. Low-temperature (2, 4, and 6°C) storage decreased weight loss (WL) and maintained higher content of titratable acidity (TA),… More >

Shuai Tang¹, Zixin Wang², Zhidan Liu¹, Yuanhui Zhang², Buchun Si^1,*

Journal of Renewable Materials, Vol.8, No.9, pp. 1033-1052, 2020, DOI:10.32604/jrm.2020.011887

Abstract Biochar, one of the products of thermochemical conversion of biomass, possesses specific physiochemical properties such as conductivity, pore adsorption, surface functional groups, and cation exchange capacity. Anaerobic digestion (AD) as a classical bio-wastes conversion technology, suffers from inhibitions, process instability, and methanogenic inefficiency which limit its effi- ciency. With the advantages of pH buffering, functional microbes enrichment, inhibitors alleviating, and direct interspecies electron transfer (DIET) accelerating, biochar suggests a promising application as additives for AD. Herein, this paper reviewed the noting physicochemical properties of biochar, and discussed its roles and related mechanisms in AD. Further, this paper highlighted the advantages… More >

H. Nakagawa¹, T. Shiina², M. Kotani³, H. Kotani¹, S. Ueno¹

Molecular & Cellular Biomechanics, Vol.3, No.4, pp. 163-163, 2006, DOI:10.32604/mcb.2006.003.163

Abstract This article has no abstract. More >

Leo Q. Wan^1,1, Chester Miller^1,1, X. Edward Guo^2,2, Van C. Mow^1,1,3,3

Molecular & Cellular Biomechanics, Vol.1, No.1, pp. 81-100, 2004, DOI:10.3970/mcb.2004.001.081

Abstract The triphasic constitutive law [Lai, Hou and Mow (1991)] has been shown in some special 1D cases to successfully model the deformational and transport behaviors of charged-hydrated, porous-permeable, soft biological tissues, as typified by articular cartilage. Due to nonlinearities and other mathematical complexities of these equations, few problems for the deformation of such materials have ever been solved analytically. Using a perturbation procedure, we have linearized the triphasic equations with respect to a small imposed axial compressive strain, and obtained an equilibrium solution, as well as a short-time boundary layer solution for the mechano- electrochemical (MEC) fields for such a… More >

M. Khennache^1,*, A. Mahieu¹, M. Ragoubi¹, S. Taibi¹, C. Poilâne², N. Leblanc¹

Journal of Renewable Materials, Vol.7, No.9, pp. 821-838, 2019, DOI:10.32604/jrm.2019.06772

Abstract In France, the use of flax fibers as reinforcement in composite materials is growing exponentially in the automotive sector, thanks to their good physicochemical properties, environmental reasons, health neutrality and due to the European Council Directives on the reuse, recycling and valorization of car components and materials. The aim of our study is to investigate biochemical, physicochemical, and mechanical properties of technical flax fibers to evaluate the impact of transformation processes (scutching, hackling, and homogenization) on final properties of associated composite materials. Different chemical analysis such as Van Soest (biochemical fraction measurement), FTIR (Fourier Transform InfraRed spectroscopy), and XRD (X-ray… More >

MC. Ho Ba Tho¹, PE Mazeran², K El Kirat¹, S.F. Bensamoun¹

CMES-Computer Modeling in Engineering & Sciences, Vol.87, No.6, pp. 557-578, 2012, DOI:10.3970/cmes.2012.087.557

Abstract Mechanical properties of cortical human bone have been investigated for more than four decades. Numerous experimental investigations on bone characterization were performed ; mechanical, vibrational, acoustical testing and morphological, physico-chemical investigations. Due to the techniques, different levels of investigation were performed and subsequently quantitative parameters are concerning different level of structure of bone (organ, tissue,... ). According to our knowledge, few investigations were performed simultaneously on mechanical, morphological and physico-chemical properties of bone. The objectives of the present study were to investigate the influence of multiscale structural characteristics of the bone tissue on its mechanical behavior and to provide some… More >

Xiaoyi Liang¹, Zhen Yang^1,2, Xingsheng Gu³, Licheng Ling¹

CMC-Computers, Materials & Continua, Vol.13, No.2, pp. 135-152, 2009, DOI:10.3970/cmc.2009.013.135

Abstract Supercapacitors, also called electrical double-layer capacitors (EDLCs), occupy a region between batteries and dielectric capacitors on the Ragone plot describing the relation between energy and power. BET specific surface area and specific capacitance are two important electrochemical property parameters for activated carbon EDLCs, which are usually tested by experimental method. However, it is misspent time to repeat lots of experiments for EDLCs' studies. In this investigation, we developed one theoretical model based on improved particle swarm optimization algorithm back propagation (PSO-BP) neural network (NN) to simulate and optimize BET specific surface area and specific capacitance. Comparative studies between the predicted… More >