N. Ma^1,2, K. Sato³, K. Takada⁴

CMC-Computers, Materials & Continua, Vol.46, No.3, pp. 195-219, 2015, DOI:10.3970/cmc.2015.046.195

Abstract The local mechanical behaviors of advanced high strength steels undergoing a very large strain from uniform plastic deformation to fracture were investigated with the aid of a measured displacement field and a measurement based FEM. As a measurement method, a digital image grid method (DIGM) was developed and the three-direction transient displacement field on uniaxial tensile test pieces was measured. Combining the measured transient displacement field with the finite element method, a measurement based FEM (M-FEM) was developed for the computation of distribution of the local strains, local stresses and ductile damage accumulation in a tensile test piece. Furthermore, the… More >

K. Umesh¹, R. Ganguli¹

CMC-Computers, Materials & Continua, Vol.41, No.3, pp. 215-240, 2014, DOI:10.3970/cmc.2014.041.215

Abstract Fractal dimension based damage detection method is investigated for a composite plate with random material properties. Composite material shows spatially varying random material properties because of complex manufacturing processes. Matrix cracks are considered as damage in the composite plate. Such cracks are often seen as the initial damage mechanism in composites under fatigue loading and also occur due to low velocity impact. Static deflection of the cantilevered composite plate with uniform loading is calculated using the finite element method. Damage detection is carried out based on sliding window fractal dimension operator using the static deflection. Two dimensional homogeneous Gaussian random… More >

X.P. Shen^1,2, X.C. Wang¹

CMC-Computers, Materials & Continua, Vol.39, No.2, pp. 135-152, 2014, DOI:10.3970/cmc.2014.039.135

Abstract Emphases of this study were placed on the modelling of plastic damage behaviour of prestressed structural concrete, with special attention being paid to the stress-triaxiality dependent plastic hardening law and the corresponding damage evolution law. A definition of stress triaxiality was proposed and introduced in the model presented here. Drucker-Prager -type plasticity was adopted in the formulation of the plastic damage constitutive equations. Numerical validations were performed for the proposed plasticity-based damage model with a driver subroutine developed in this study. The predicted stress-strain behaviour seems reasonably accurate for the uniaxial tension and uniaxial compression compared with the experimental data… More >

A. Ramachandra Murthy¹, G.S. Palani¹, Smitha Gopinath¹, V. Ramesh Kumar¹, Nagesh R. Iyer¹

CMC-Computers, Materials & Continua, Vol.37, No.2, pp. 77-96, 2013, DOI:10.3970/cmc.2013.037.077

Abstract This paper presents the development of an improved concrete damage model for projectile impact on concrete structural components. The improvement is in terms of reduction of input material parameters for nonlinear transient dynamic impact analysis by employing concrete damage model. The experimental data such as pressure vs volumetric strain, triaxial compression failure and pressure vs stress difference have been used for evaluation of the important parameters of concrete damage model. Various contact algorithms have been outlined briefly to model the interface between the projectile and target. The nonlinear explicit transient dynamic analysis has been carried out by using finite element… More >

R. R. Valisetty¹, A.M. Dongare², A.M. Rajendran³, R. R. Namburu¹

CMC-Computers, Materials & Continua, Vol.36, No.3, pp. 231-255, 2013, DOI:10.3970/cmc.2013.036.231

Abstract Materials used in soldier protective structures, such as armor, vehicles and civil infrastructures, are being improved for performance in extreme dynamic environments. Nanocrystalline metals show significant promise in the design of these structures with superior strengths attributed to the dislocation-based and grain-boundary-based processes as compared to their polycrystalline counterparts. An optimization of these materials, however, requires a fundamental understanding of damage evolution at the atomic level. Accordingly, atomistic molecular dynamics simulations are performed using an embedded-atom method (EAM) potential on three nano-crystalline aluminum atom systems, one a Voronoi-based nano-crystalline system with an average grain size of 10 nm, and the… More >

M. Chatiri¹, A. Matzenmiller²

CMC-Computers, Materials & Continua, Vol.35, No.3, pp. 255-283, 2013, DOI:10.3970/cmc.2013.035.255

Abstract This article presents a three dimensional constitutive model for anisotropic damage to describe the elastic-brittle behavior of unidirectional fibrereinforced laminated composites. The primary objective of the article focuses on the three dimensional relationship between damage of the material and the effective elastic properties for the purpose of stress analysis of composite structures, in extension to the two dimensional model in Matzenmiller, Lubliner and Taylor (1995). A homogenized continuum is adopted for the constitutive theory of anisotropic damage and elasticity. Damage initiation criteria are based on Puck failure criterion for first ply failure and progressive micro crack propagation is based on… More >

Christian Heinrich¹, Anthony M. Waas²

CMC-Computers, Materials & Continua, Vol.35, No.2, pp. 155-181, 2013, DOI:10.3970/cmc.2013.035.155

Abstract The smeared crack approach (SCA) is revisited to describe post-peak softening in laminated composite materials. First, predictions of the SCA are compared against linear elastic fracture mechanics (LEFM) based predictions for the debonding of an adhesively bonded double cantilever beam. A sensitivity analysis is performed to establish the influence of element size and cohesive strength on the load-deflection response. The SCA is further validated by studying the in-plane fracture of a laminated composite in a single edge bend test configuration. In doing so, issues related to mesh size and their effects (or non-effects) are discussed and compared against other predictive… More >

K. C. Liu¹, S. M. Arnold²

CMC-Computers, Materials & Continua, Vol.35, No.1, pp. 35-65, 2013, DOI:10.3970/cmc.2013.035.035

Abstract It is well known that failure of a material is a locally driven event. In the case of ceramic matrix composites (CMCs), significant variations in the microstructure of the composite exist and their significance on both deformation and life response need to be assessed. Examples of these variations include changes in the fiber tow shape, tow shifting/nesting and voids within and between tows. In the present work, the influence of many of these scale specific architectural features of woven ceramic composite are examined stochastically at both the macroscale (woven repeating unit cell (RUC)) and structural scale (idealized using multiple RUCs).… More >

Chandra Veer Singh^1,*

CMC-Computers, Materials & Continua, Vol.34, No.3, pp. 227-249, 2013, DOI:10.3970/cmc.2013.034.227

Abstract A non-linear damage model is developed for the prediction of stiffness degradation in composite laminates due to transverse matrix cracking. The model follows the framework of a recently developed synergistic damage mechanics (SDM) approach which combines the strengths of micro-damage mechanics and continuum damage mechanics (CDM) through the so-called constraint parameters. A common limitation of the current CDM and SDM models has been the tendency to over-predict stiffness changes at high crack densities due to linearity inherent in their stiffness-damage relationships. The present paper extends this SDM approach by including higher order damage terms in the characterization of ply cracking… More >

A. Ataş¹, C. Soutis²

CMC-Computers, Materials & Continua, Vol.34, No.3, pp. 199-226, 2013, DOI:10.3970/cmc.2013.034.199

Abstract A strength prediction method is presented for double-lap single fastener bolted joints of cross-ply carbon fibre reinforced plastic (CFRP) composite laminates using cohesive zone elements (CZEs). Three-dimensional finite element models were developed and CZEs were inserted into subcritical damage planes identified from X-ray radiographs. The method makes a compromise between the experimental correlation factors (dependant on lay-up, stacking sequence and joint geometry) and three material properties (fracture energy, interlaminar strength and nonlinear shear stress-strain response). Strength of the joints was determined from the predicted load-displacement curves considering sub-laminate and plylevel scaling effects. The predictions are in a reasonable agreement with… More >