Dan Zhao¹, Yang You², Chuanwen Luo^3,*, Ting Chen^4,*, Yang Liu⁵

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 3063-3083, 2024, DOI:10.32604/cmes.2023.045400

Abstract In recent years, the research field of data collection under local differential privacy (LDP) has expanded its focus from elementary data types to include more complex structural data, such as set-value and graph data. However, our comprehensive review of existing literature reveals that there needs to be more studies that engage with key-value data collection. Such studies would simultaneously collect the frequencies of keys and the mean of values associated with each key. Additionally, the allocation of the privacy budget between the frequencies of keys and the means of values for each key does not yield an optimal utility tradeoff.… More >

Bin Liu¹, Shuai Liang¹, Renjie Ding¹, Shuguang Li^2,*

Energy Engineering, Vol.121, No.3, pp. 729-746, 2024, DOI:10.32604/ee.2023.044224

Abstract The application of traditional synchronous measurement methods is limited by frequent fluctuations of electrical signals and complex frequency components in distribution networks. Therefore, it is critical to find solutions to the issues of multifrequency parameter estimation and synchronous measurement estimation accuracy in the complex environment of distribution networks. By utilizing the multifrequency sensing capabilities of discrete Fourier transform signals and Taylor series for dynamic signal processing, a multifrequency signal estimation approach based on HT-IpDFT-STWLS (HIpST) for distribution networks is provided. First, by introducing the Hilbert transform (HT), the influence of noise on the estimation algorithm is reduced. Second, signal frequency… More >

Mehmood Ahmed^1,3,*, Noraini B. Ibrahim¹, Wasif Nisar², Adeel Ahmed³, Muhammad Junaid^3,*, Emmanuel Soriano Flores⁴, Divya Anand⁴

CMC-Computers, Materials & Continua, Vol.78, No.1, pp. 1399-1422, 2024, DOI:10.32604/cmc.2023.046648

Abstract Accurate software cost estimation in Global Software Development (GSD) remains challenging due to reliance on historical data and expert judgments. Traditional models, such as the Constructive Cost Model (COCOMO II), rely heavily on historical and accurate data. In addition, expert judgment is required to set many input parameters, which can introduce subjectivity and variability in the estimation process. Consequently, there is a need to improve the current GSD models to mitigate reliance on historical data, subjectivity in expert judgment, inadequate consideration of GSD-based cost drivers and limited integration of modern technologies with cost overruns. This study introduces a novel hybrid… More >

Sangeeta Yadav¹, Preeti Gulia^1,*, Nasib Singh Gill^1,*, Piyush Kumar Shukla², Arfat Ahmad Khan³, Sultan Alharby⁴, Ahmed Alhussen⁴, Mohd Anul Haq⁵

CMC-Computers, Materials & Continua, Vol.78, No.1, pp. 1253-1274, 2024, DOI:10.32604/cmc.2023.042869

Abstract Inpatient falls from beds in hospitals are a common problem. Such falls may result in severe injuries. This problem can be addressed by continuous monitoring of patients using cameras. Recent advancements in deep learning-based video analytics have made this task of fall detection more effective and efficient. Along with fall detection, monitoring of different activities of the patients is also of significant concern to assess the improvement in their health. High computation-intensive models are required to monitor every action of the patient precisely. This requirement limits the applicability of such networks. Hence, to keep the model lightweight, the already designed… More >

Xiaoyi Wang¹, Xinyue Chang², Wenxuan Wang^1,*, Zijie Qiao³, Feng Zhang^3,*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.2, pp. 1775-1796, 2024, DOI:10.32604/cmes.2023.043913

Abstract The objective of reliability-based design optimization (RBDO) is to minimize the optimization objective while satisfying the corresponding reliability requirements. However, the nested loop characteristic reduces the efficiency of RBDO algorithm, which hinders their application to high-dimensional engineering problems. To address these issues, this paper proposes an efficient decoupled RBDO method combining high dimensional model representation (HDMR) and the weight-point estimation method (WPEM). First, we decouple the RBDO model using HDMR and WPEM. Second, Lagrange interpolation is used to approximate a univariate function. Finally, based on the results of the first two steps, the original nested loop reliability optimization model is… More >

Cheng Han^1,*, Zhengguang Xu^1,2

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.1, pp. 515-536, 2024, DOI:10.32604/cmes.2023.043464

Abstract A prediction framework based on the evolution of pattern motion probability density is proposed for the output prediction and estimation problem of non-Newtonian mechanical systems, assuming that the system satisfies the generalized Lipschitz condition. As a complex nonlinear system primarily governed by statistical laws rather than Newtonian mechanics, the output of non-Newtonian mechanics systems is difficult to describe through deterministic variables such as state variables, which poses difficulties in predicting and estimating the system’s output. In this article, the temporal variation of the system is described by constructing pattern category variables, which are non-deterministic variables. Since pattern category variables have… More >

Yaping Luo¹, Na Guo^1,*, Dong Liu², Shuming Peng³, Xinchen Wang⁴, Jie Wu³

Revue Internationale de Géomatique, Vol.32, pp. 39-52, 2023, DOI:10.32604/RIG.2023.046014

Abstract Using hyperspectral data collected in January and June 2022 from the Sha River, the concentrations of total nitrogen (TN) and total phosphorus (TP) were estimated using the differential method. The results indicate that the optimal bands for estimation vary monthly due to temperature fluctuations. In the TN model, the power function model at 586 nm in January exhibited the strongest fit, yielding a fit coefficient (R²) of 0.95 and F-value of 164.57 at a significance level (p) of less than 0.01. Conversely, the exponential model at 477 nm in June provided the best fit, with R² = 0.93 and F… More > Graphic Abstract

Pengxin Li¹, Rong Wang^1,2,*, Wenjing Zhang¹, Yinuo Liu¹, Chenyue Xu¹

CMES-Computer Modeling in Engineering & Sciences, Vol.138, No.3, pp. 2239-2255, 2024, DOI:10.32604/cmes.2023.030677

Abstract Human pose estimation aims to localize the body joints from image or video data. With the development of deep learning, pose estimation has become a hot research topic in the field of computer vision. In recent years, human pose estimation has achieved great success in multiple fields such as animation and sports. However, to obtain accurate positioning results, existing methods may suffer from large model sizes, a high number of parameters, and increased complexity, leading to high computing costs. In this paper, we propose a new lightweight feature encoder to construct a high-resolution network that reduces the number of parameters… More >

Sharath Kumar, Harsha Kumar, N. Gnanasekaran^*

Frontiers in Heat and Mass Transfer, Vol.7, pp. 1-7, 2016, DOI:10.5098/hmt.7.15

Abstract The paper reports the estimation of volumetric heat generation (qv) from a Teflon cylinder. An aluminum heater, which acts as a heat source, is placed at the center of the Teflon cylinder. The problem under consideration is modeled as a three dimensional steady state conjugate heat transfer from the Teflon cylinder. The model is created and simulations are performed using ANSYS FLUENT to obtain temperature data for the known heat generation qv. The numerical model developed using ANSYS acts as a forward model. The inverse model used in this work is Artificial Neural Network (ANN). Estimation of heat generation is… More >

Shariar Md Imtiaz¹, Ki-Chul Kwon¹, F. M. Fahmid Hossain¹, Md. Biddut Hossain¹, Rupali Kiran Shinde¹, Sang-Keun Gil², Nam Kim^1,*

Computer Systems Science and Engineering, Vol.47, No.3, pp. 2921-2937, 2023, DOI:10.32604/csse.2023.040205

Abstract This article describes a novel approach for enhancing the three-dimensional (3D) point cloud reconstruction for light field microscopy (LFM) using U-net architecture-based fully convolutional neural network (CNN). Since the directional view of the LFM is limited, noise and artifacts make it difficult to reconstruct the exact shape of 3D point clouds. The existing methods suffer from these problems due to the self-occlusion of the model. This manuscript proposes a deep fusion learning (DL) method that combines a 3D CNN with a U-Net-based model as a feature extractor. The sub-aperture images obtained from the light field microscopy are aligned to form… More >