Mua’ad Abu-Faraj^1,*, Abeer Al-Hyari², Ziad Alqadi³

CMC-Computers, Materials & Continua, Vol.72, No.3, pp. 5699-5712, 2022, DOI:10.32604/cmc.2022.027364

Abstract Predicting the value of one or more variables using the values of other variables is a very important process in the various engineering experiments that include large data that are difficult to obtain using different measurement processes. Regression is one of the most important types of supervised machine learning, in which labeled data is used to build a prediction model, regression can be classified into three different categories: linear, polynomial, and logistic. In this research paper, different methods will be implemented to solve the linear regression problem, where there is a linear relationship between the target and the predicted output.… More >

Jinliang Zhu¹, Xiulei Wang¹, Guihua Wang¹, Xianglin Zhong², Zhenguo Li³, Zhiming Wang¹, Ke Sun^1,*, Shuzhan Bai^1,*

FDMP-Fluid Dynamics & Materials Processing, Vol.18, No.3, pp. 701-711, 2022, DOI: 10.32604/fdmp.2022.019311

Abstract Exhaust thermal management is essential to allow engines to meet the Euro VI emissions standards and reducing nitrogen oxide emissions is one of the most important targets being pursued nowadays. Along these lines, in the present study, engine’s thermal performances have been evaluated on the basis of a WHTC test, namely a transient engine dynamometer schedule defined by the global technical regulation (GTR) developed by the UN ECE GRPE group (the GTR is covering a world-wide harmonized heavy-duty certification (WHDC) procedure for engine exhaust emissions). The influence of thermal management on fuel consumption, intake, and tailpipe NO_x have been quantitatively… More >

P. V. Rajesh¹, Kanak Kalita^2,*, Xiao-Zhi Gao³

CMC-Computers, Materials & Continua, Vol.70, No.2, pp. 2415-2433, 2022, DOI:10.32604/cmc.2022.018247

Abstract Bone grafting is a surgical restructuring procedure of replacing broken bones and reconstructing missing bone pieces so that complex bone fractures can be repaired to avoid any serious health risk as well as permanent bone disfiguration. Normally, human bones tend to regenerate and heal completely from fracture. But it needs a small scaffold to provide the necessary space to grow. Bone implants allow a broken bone to grow seamlessly. Traditionally, non-corrosive metal alloys are used for fixing broken bones. A metal plate is fastened between two ends of broken bones to join them. However, issues like high weight, high cost,… More >

Ramkiran Bhallamudi^1,2, Sudhakar Kumarasamy^3,4,5, Chinnayan Karuppaiyah Sundarabalan^1,*

Energy Engineering, Vol.118, No.6, pp. 1827-1838, 2021, DOI:10.32604/EE.2021.016798

Abstract This study presents an experimental performance of a solar photovoltaic module under clean, dust, and shadow conditions. It is found that there is a significant decrease in electrical power produced (40% in the case of dust panels and 80% in the case of shadow panels) and a decrease in efficiency of around 6% in the case with dust and 9% in the case with the shadow, as compared to the clean panel. From the results, it is clear that there is a substantial effect of a partial shadow than dust on the performance of the solar panel. This is due… More >

Lihui Ma¹, Limin He^1,2,*, Xiaoming Luo^1,2, Xiangran Mi³

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.5, pp. 959-970, 2021, DOI:10.32604/fdmp.2021.016710

Abstract Dedicated experiments and numerical simulations have been conducted to investigate the splitting characteristics of a gas-liquid two phase flow at a T junction. The experiments were carried out for different gas-liquid velocities. The flow rates in the two branches were measured accurately to determine how the two considered phases distribute in the two outlets. The experimental results have shown that when the two outlet pressures are asymmetric, the two-phase flow always tends to flow into the outlet which has a lower pressure. As the inlet liquid velocity increases, however, the two-phase flow gradually tends to split evenly. Compared with the… More >

Yanpu Chao¹, Hao Yi^2,3,*

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.3, pp. 587-595, 2021, DOI:10.32604/fdmp.2021.015478

Abstract Many liquid metals have a high boiling point, strong electrical conductivity, high thermal conductivity, and non-toxic properties, which make them ideal targets for applications in different fields such as optics, microcircuits, electronic switches, micro-electromechanical System (MEMS) devices and 3D printing manufacturing. However, owing to the generally high surface tension of these liquids, achieving uniform micro-droplets is often a challenge due to the inherent difficulties in controlling their size and shape. In this study, a gallium indium alloy (GaIn_24.5) has been used in combination with a pneumatic drop-on-demand (DOD) injection technology to carry out a series of experiments. The micro-droplet forming… More >

Daoming Shen^1,2,*, Chao Gui¹, Jinhong Xia¹, Songtao Xue^2,3

FDMP-Fluid Dynamics & Materials Processing, Vol.16, No.3, pp. 489-500, 2020, DOI:10.32604/fdmp.2020.08969

Abstract The performances of a refrigeration unit relying on compressors working in parallel have been investigated considering the influence of the compressor volumetric efficiency and isentropic efficiency on the compression ratio. Moreover, the following influential factors have been taken into account: evaporation temperature, condensation temperature and compressor suction-exhaust pressure ratio for different opening conditions of the compressor. The following quantities have been selected as the unit performance measurement indicators: refrigeration capacity, energy efficiency ratio (COP), compressor power consumption, and refrigerant flow rate. The experimental results indicate that the system refrigeration capacity and COP decrease with a decrease in evaporation temperature, increase… More >

R.S. Olivito¹, F.A. Zuccarello¹

Structural Durability & Health Monitoring, Vol.2, No.1, pp. 19-28, 2006, DOI:10.3970/sdhm.2006.002.019

Abstract During the last decades FRP materials have been utilized in many civil engineering applications for their good performances in substituting traditional restoration techniques, especially in reinforcing and restoring damaged structures. At present, the use of composite materials is greatly increasing as a consequence of the fact that conservation and restoration of existing historic heritage are becoming key issues for civil engineers and architects. This paper deals with the behavior of brick masonry models subjected to cyclic loads with the aim of studying their performances and durability. Firstly the models were damaged by imposing a strain history until they reached a… More >

A. Abbassi^1,2, N. Kechiche¹, H. Ben Aissia¹

FDMP-Fluid Dynamics & Materials Processing, Vol.10, No.3, pp. 319-341, 2014, DOI:10.3970/fdmp.2014.010.319

Abstract Jet transition towards a turbulent state is an interesting topic requiring a detailed analysis of the process leading to the onset and amplification of small flow disturbances. Here we examine experimentally the transition process for an isothermal laminar round free jet at low values of the Reynolds number. Close to the inlet nozzle, the turbulence intensity is assumed to be small enough so that the initial shear layer can be considered laminar and the velocity profile uniform. Experimental data are obtained using a Laser Doppler Anemometry (LDA) technique at various longitudinal and transversal coordinates, (x,y). Spectral analysis of the instantaneous… More >

B. Madani¹, F. Topin², L. Tadrist²

FDMP-Fluid Dynamics & Materials Processing, Vol.6, No.4, pp. 351-368, 2010, DOI:10.3970/fdmp.2010.006.351

Abstract The present work deals with the hydraulic characterization of two-phase flow with phase change in a channel filled with metallic foam. We provide a general presentation of metallic foams including morphological characteristics, fabrication processes and industrial applications. The experimental facility, which consists of a hydrodynamic loop, the test section, measurement devices, and the data acquisition system, is presented. The Metallic foam sample tested in the present work is manufactured by SCPS (French manufacturer). N-pentane is used as a coolant fluid. The mass velocity values lie between 4 and 49 kg/ m2s, while the heating power in the test section ranges… More >