Wenting Ren^1,3, Fei Guo², Minghui Liu^1,3, Haocheng Xu^1,3, Hankun Wang^1,3, Yan Yu^1,2,*

Journal of Renewable Materials, Vol.9, No.12, pp. 2291-2301, 2021, DOI:10.32604/jrm.2021.015973

Abstract Understanding the assembly and spatial arrangement of bamboo cell wall components is crucial for its optimal utilization. Bamboo cell walls consist of aggregates of cellulose microfibrils and matrix. In the present study, the size and arrangement of cellulose microfibril aggregates in the cell walls of sclerenchyma fibers and parenchyma cells in moso bamboo were investigated with NMR and FE-SEM. The NMR measurement showed that the characteristic sizes of the microfibril aggregates of fibers and parenchyma cells were approximately 25.8 nm and 18.8 nm, respectively. Furthermore, high-resolution SEM showed the size of microfibril aggregates varied little across the cell wall of… More >

Enas H. Ali, Juman A. Naser^*, Zainab W. Ahmed, Taki A. Himdan

Journal of Renewable Materials, Vol.9, No.11, pp. 1927-1939, 2021, DOI:10.32604/jrm.2021.015624

Abstract Polymeric nanofibers are a promising technology to protect the metal surfaces from corrosion. Through the literature search, the use of polyacrylonitrile nanofibres (PANNFs) as a corrosion inhibitor coating for aluminum alloys has not been evaluated. This work includes the development of a new, lightweight, high surface area and efficient coating of PANNFs that produced using electrospinning process to resist the corrosion of aluminum alloys (AA5083) which immersed in 0.6 M NaCl at alkaline medium (pH = 12) and acidic medium (pH = 1) at a range of temperatures (293–323) K. The PANNFs coating was successfully deposited on AA 5083 specimens,… More >

Resat Kosker^1,*, Ismail Gulten²

CMC-Computers, Materials & Continua, Vol.69, No.1, pp. 967-983, 2021, DOI:10.32604/cmc.2021.017857

Abstract In this paper, stress distribution is examined in the case where infinite length co-phase periodically curved two neighboring hollow fibers are contained by an infinite elastic body. The midline of the fibers is assumed to be in the same plane. Using the three-dimensional geometric linear exact equations of the elasticity theory, research is carried out by use of the piecewise homogeneous body model. Moreover, the body is assumed to be loaded at infinity by uniformly distributed normal forces along the hollow fibers. On the inter-medium between the hollow fibers and matrix surfaces, complete cohesion conditions are satisfied. The boundary form… More >

Dan Tian^1,*, Danni Yu², Chunhui He³

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.4, pp. 711-720, 2021, DOI:10.32604/fdmp.2021.014290

Abstract In the search for sustainable alternatives to harmful synthetic fibers, an increasing amount of research focuses on biomimicry and natural fibers. Sea silk is an exceptional textile material. It is a kind of natural silk produced using the long silky filaments secreted by a specific bivalve mollusk (Pinna nobilis); now at edge of extinction. This paper suggests a simple but effective way to prepare artificial sea silk from Mytilus edulis. A sea silk solution is prepared using a Mytilus edulis protein, and a polyvinyl alcohol (PVA) solution is mixed with the sea silk solution in order to produce artificial sea… More >

Heru Suryanto^1,2,*, Muhamad Muhajir¹, Bili Darnanto Susilo¹, Yanuar Rohmat Aji Pradana¹, Husni Wahyu Wijaya^2,3, Abu Saad Ansari⁴, Uun Yanuhar⁵

Journal of Renewable Materials, Vol.9, No.10, pp. 1717-1728, 2021, DOI:10.32604/jrm.2021.015312

Abstract The microstructure of bacterial cellulose nanofibers (BCNs) film affects its characteristic. One of several means to engineer the microstructure is by changing the BCNs size and fiber distribution through a high-pressure homogenizer (HPH) process. This research aimed to find out the effects of repetition cycles on HPH process towards BCNs film characteristics. To prepare BCNs films, a pellicle from the fermentation of pineapple peels waste with Acetobacter xylinum (A. xylinum) was extracted, followed by crushing the pellicle with a high-speed blender, thereafter, homogenized using HPH at 150 bar pressure with variations of 5, 10, 15, and 20 cycles. The BCNs… More >

Sudhakar Muniyasamy^1,2,*, Asis Patnaik^3,*

Journal of Renewable Materials, Vol.9, No.10, pp. 1661-1671, 2021, DOI:10.32604/jrm.2021.014904

Abstract Present study deals with the biodegradable behavior of individual components and their preforms of nonwoven biocomposites developed from waste wool fibers including coring wool (CW), dorper wool (DW) and recycled polyester fibers (RPET). A respirometric technique was employed to estimate the production of CO₂ during the biodegradation experiments under soil and aqueous media conditions. Functional groups of test samples before and after biodegradation were analyzed using Fourier transform infrared spectroscopy (FTIR). Leaching chemicals such as formaldehyde (hydrolyzed) and Chromium VI (Cr VI) was also measured. The CO₂ emission in wool fibers CW and DW indicated 90% and 60% biodegradation in… More >

Hao Dou^1,2,*, Hongxia Liu^1,2, Feng Wang^1,2, Yanli Sun^1,2

FDMP-Fluid Dynamics & Materials Processing, Vol.17, No.3, pp. 629-638, 2021, DOI:10.32604/fdmp.2021.015612

Abstract Electrospinning is a versatile and popular method for the fabrication of ultrafine fibers and many parameters in electrospinning can be adjusted when ideal micro/nanofibers are required. In particular, the selection of a proper solvent condition is a fundamental and crucial step to produce electrospun ultrafine fibers. In this study, a commonly used biomaterial, polylactic acid (PLA), was dissolved in 7 different solvents and PLA micro/nanofibers were prepared by electrospinning. The morphology, porosity, mechanical property and static contact angle were characterized to determine the quality of the obtained product. The results show that different solvent conditions have a significant effect on… More >

Zhiyu Weng¹, Lina Wang^1,2,*, Qiang Liu², Xuemin Pan¹, Yonghao Xu³, Jing Li¹

Journal of Renewable Materials, Vol.9, No.8, pp. 1503-1517, 2021, DOI:10.32604/jrm.2021.015003

Abstract To explore an environmentally friendly improvement measure for red clay, the function and mechanism of xanthan gum biopolymer and polypropylene fibers on the strength properties of red clay were investigated by unconfined compressive strength and scanning electron microscopy tests. The test results demonstrated that the contents and curing ages of xanthan gum had significant influences on the unconfined compressive strength of red clay. Compared with untreated soil, 1.5% xanthan gum content was the optimal ratio in which the strength increment was between 41.52 kPa and 64.73 kPa. On the other hand, the strength of xanthan gum-treated red clay increased, whereas… More >

Achille Gnassiri Wedaïna^1,2, Antonio Pizzi², Wolfgang Nzie¹, Raidandi Danwe³, Noel Konaï^4,*, Siham Amirou², Cesar Segovia⁵, Raphaël Kueny⁵

Journal of Renewable Materials, Vol.9, No.3, pp. 477-493, 2021, DOI:10.32604/jrm.2021.012782

Abstract The Piptadeniastrum Africanum bark tannin extract was characterized using MALDI TOF, ATR-FT MIR. It was used in the development of a resin with Vachellia nilotica extract as a biohardener. This tannin is consisting of Catechin, Quercetin, Chalcone, Gallocatechin, Epigallocatechin gallate, Epicatechin gallate. The gel time of the resin at natural pH (pH = 5.4) is 660 s and its MOE obtained by thermomechanical analysis is 3909 MPa. The tenacity of Urena lobata fibers were tested, woven into unidirectional mats (UD), and used as reinforcement in the development of biocomposite. The fibers tenacity at 20, 30 and 50 mm lengths are… More >

Wenbei Bi¹, Zengfeng Yan^1,*, Huan Zhao¹, Lixin Sun², Xudong Wang^3,4, Zhengmo Zhang³

Journal of Renewable Materials, Vol.8, No.12, pp. 1691-1710, 2020, DOI:10.32604/jrm.2020.012808

Abstract Murals in Mogao Grottoes consist of three parts: support layer, earthen plasters and paint layer. The earthen plasters play a key role in the preservation of murals. It is a mixture of Dengban soil, sand, and plant fiber. Two different natural fibers, hemp fiber and cotton fiber, were reinforced to earthen plasters in the same percentage to evaluate the influence on hygrothermal performance. The two types of earthen plasters were studied: one containing hemp fiber in the fine plaster (HFP) and the other containing cotton fiber in the fine plaster (CFP). Specific heat capacity, dry thermal conductivity, water vapor permeability,… More >