Nasser Alshammari¹, Shumaila Shahzadi², Saad Awadh Alanazi^1,*, Shahid Naseem³, Muhammad Anwar³, Madallah Alruwaili⁴, Muhammad Rizwan Abid⁵, Omar Alruwaili⁴, Ahmed Alsayat¹, Fahad Ahmad^6,7

Computer Systems Science and Engineering, Vol.48, No.2, pp. 363-394, 2024, DOI:10.32604/csse.2023.040721

Abstract Software Defined Network (SDN) and Network Function Virtualization (NFV) technology promote several benefits to network operators, including reduced maintenance costs, increased network operational performance, simplified network lifecycle, and policies management. Network vulnerabilities try to modify services provided by Network Function Virtualization MANagement and Orchestration (NFV MANO), and malicious attacks in different scenarios disrupt the NFV Orchestrator (NFVO) and Virtualized Infrastructure Manager (VIM) lifecycle management related to network services or individual Virtualized Network Function (VNF). This paper proposes an anomaly detection mechanism that monitors threats in NFV MANO and manages promptly and adaptively to implement and handle security functions in order… More >

Jiwon Yu^a , Seok-Won Kang^a, Saeil Jeon^b, Debjyoti Banerjee^a,*

Frontiers in Heat and Mass Transfer, Vol.3, No.1, pp. 1-9, 2012, DOI:10.5098/hmt.v3.1.3004

Abstract Experiments were performed to study the forced convective heat transfer of de-ionized water (DI water) and aqueous nanofluids in a microchannel and temperature measurements were obtained using an array of nanosensors (i.e., thin film thermocouples or “TFT”). Heat flux values were calculated from the experimental measurements for temperature recorded by the TFT array. The experiments were performed for the different test fluids where the flow rate, mass concentration (of silica nanoparticles ~10-30 nm diameter) in the colloidal suspension and the wall temperature profile (as well as applied heat flux values) were varied parametrically.
Anomalous enhancement of the convective heat… More >

Arafat A. Bhuiyan^a,1, A. K. M. Sadrul Islam^a, M. Ruhul Amin^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-9, 2012, DOI:10.5098/hmt.v3.3.3006

Abstract This numerical analysis presents the airside performance of a wavy fin-and-tube heat exchanger having 4 row configurations considering steady, incompressible and 3D flow using Commercial CFD Code ANSYS CFX 12.0. Results are presented in the form of friction factor (f), Colburn factor (j) and efficiency index (j/f). The numerical procedure has been validated by comparison with published numerical and experimental results and good agreement has been observed. A series of numerical calculations have been carried out in order to analyze the influence of various geometric characteristics on different fields as well as on the heat transfer and pressure drop and… More >

Md. Farhad Ismail^a,*, M.A.I. Rashid^b , M. Mahbub^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-8, 2012, DOI:10.5098/hmt.v3.3.3002

Abstract Carbon nanotube (CNT) has been proven to be an effective material for the thermal management of MEMS-based devices due to its superior thermal conductivity. At the same time, micro-channel heat-sinks are widely used in electronic products as a high performance heat transfer device because of its simple construction, easy fabrication process and effective heat removal capability. A numerical study has been carried out to investigate the thermal-fluid characteristics of the aligned and staggered MWCNT (multi walled CNT) based micro pin fins having 650 µm long with hydraulic diameter of ~130 µm. Average heat transfer coefficients have been obtained for effective… More >

Alexandre Vaudrey^a,*, Philippe Baucour^b, François Lanzetta^b, Raynal Glises^b

Frontiers in Heat and Mass Transfer, Vol.3, No.3, pp. 1-8, 2012, DOI:10.5098/hmt.v3.3.3001

Abstract Producing electrical work in consuming chemical energy, the fuel cell (FC) is forced by the 2^nd law to reject heat to its surrounding. However, as it occurs for any other type of engine, this thermal energy cannot be exchanged in an isothermal way in finite time or through finite areas. As it was already done for various types of systems, including chemical engines, the fuel cell is here studied within the finite time thermodynamics framework. An endoreversible fuel cell is then defined, internally reversible but producing entropy during heat exchanges with its ambiance. Considering usual H₂/O₂ and H₂/air chemical reactions… More >

Muhammad Akbar¹, Huali Pan^1,*, Jiangcheng Huang², Bilal Ahmed³, Guoqiang Ou¹

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 2835-2863, 2024, DOI:10.32604/cmes.2024.046993

Abstract The present work aims to assess earthquake-induced earth-retaining (ER) wall displacement. This study is on the dynamics analysis of various earth-retaining wall designs in hollow precast concrete panels, reinforcement concrete facing panels, and gravity-type earth-retaining walls. The finite element (FE) simulations utilized a 3D plane strain condition to model full-scale ER walls and numerous nonlinear dynamics analyses. The seismic performance of different models, which includes reinforcement concrete panels and gravity-type and hollow precast concrete ER walls, was simulated and examined using the FE approach. It also displays comparative studies such as stress distribution, deflection of the wall, acceleration across the… More >

Xinci Zhou, Jin Zhu^*

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 2705-2727, 2024, DOI:10.32604/cmes.2024.046363

Abstract As the number of automated guided vehicles (AGVs) within automated container terminals (ACT) continues to rise, conflicts have become more frequent. Addressing point and edge conflicts of AGVs, a multi-AGV conflict-free path planning model has been formulated to minimize the total path length of AGVs between shore bridges and yards. For larger terminal maps and complex environments, the grid method is employed to model AGVs’ road networks. An improved bounded conflict-based search (IBCBS) algorithm tailored to ACT is proposed, leveraging the binary tree principle to resolve conflicts and employing focal search to expand the search range. Comparative experiments involving 60… More >

Oulfa Harrat^1,*, Yazid Hadidane¹, S. M. Anas^2,*, Nadhim Hamah Sor^3,4, Ahmed Farouk Deifalla⁵, Paul O. Awoyera⁶, Nadia Gouider¹

CMES-Computer Modeling in Engineering & Sciences, Vol.139, No.3, pp. 3435-3465, 2024, DOI:10.32604/cmes.2023.044950

Abstract Given their numerous functional and architectural benefits, such as improved bearing capacity and increased resistance to elastic instability modes, cold-formed steel (CFS) built-up sections have become increasingly developed and used in recent years, particularly in the construction industry. This paper presents an analytical and numerical study of assembled CFS two single channel-shaped columns with different slenderness and configurations (back-to-back, face-to-face, and box). These columns were joined by double-row rivets for the back-to-back and box configurations, whereas they were welded together for the face-to-face design. The built-up columns were filled with ordinary concrete of good strength. Finite element models were applied,… More > Graphic Abstract

R. Sujatha, K. Nimala^*

CMC-Computers, Materials & Continua, Vol.78, No.2, pp. 1669-1686, 2024, DOI:10.32604/cmc.2023.046963

Abstract Sentence classification is the process of categorizing a sentence based on the context of the sentence. Sentence categorization requires more semantic highlights than other tasks, such as dependence parsing, which requires more syntactic elements. Most existing strategies focus on the general semantics of a conversation without involving the context of the sentence, recognizing the progress and comparing impacts. An ensemble pre-trained language model was taken up here to classify the conversation sentences from the conversation corpus. The conversational sentences are classified into four categories: information, question, directive, and commission. These classification label sequences are for analyzing the conversation progress and… More >

Ye Lu^1,*, Tao Feng¹, Chunyan Liu², Wenbo Zhang³

CMC-Computers, Materials & Continua, Vol.78, No.2, pp. 2787-2811, 2024, DOI:10.32604/cmc.2023.046106

Abstract The Access control scheme is an effective method to protect user data privacy. The access control scheme based on blockchain and ciphertext policy attribute encryption (CP–ABE) can solve the problems of single—point of failure and lack of trust in the centralized system. However, it also brings new problems to the health information in the cloud storage environment, such as attribute leakage, low consensus efficiency, complex permission updates, and so on. This paper proposes an access control scheme with fine-grained attribute revocation, keyword search, and traceability of the attribute private key distribution process. Blockchain technology tracks the authorization of attribute private… More >