MUHAMAD SOFFI BIN MANDA^1,2, MOHD RUZAIMI BIN MAT REJAB¹, SHUKUR ABU HASSAN^3,4, MAT UZIR BIN WAHIT^3,4, JOSEPH SELVI BINOJ^5,*, BRIGHT BRAILSON MANSINGH⁶, SITI SAFARAH BINTI AMIRNUDDIN³, ALAMRY ALI⁷, KHENG LIM GOH^8,9, DIDIK NURHADIYANTO¹⁰

Journal of Polymer Materials, Vol.39, No.3-4, pp. 241-253, 2022, DOI:10.32381/JPM.2022.39.3-4.5

Abstract This study investigates the potential of Tin Slag Polymer Concrete (TSPC) strengthening through confinement using basalt fiber reinforced polymer (BFRP) and aramid fiber reinforced polymer (AFRP) confinement. TSPC short cylindrical column samples have been wrapped with BFRP and AFRP in a single layer (30 mm overlap) using Sikadur-330 epoxy and final samples were coded as TSPC-UC, TSPC-BF and TSPC-AF for unconfined, BFRP and AFRP for confined respectively. After curing for 30 days at room temperature, compressive test has been performed to know the strength, modulus, strain, fracture energy and failure modes of unconfined and confined TSPC. Test result shows that… More >

SIVARAJ SUDHAHAR^a,f, UMAMAHESWARI G^b, JAYA PRAKASH ALLA^c, RAGHAVA RAO JONNALAGADDA^d, SUGUNA LAKSHMI^e, SANJEEV GUPTA^f,*

Journal of Polymer Materials, Vol.40, No.1-2, pp. 33-45, 2023, DOI:10.32381/JPM.2023.40.1-2.3

Abstract Leather manufacturing process involves a lot of waste disposal which pollutes environment, some of the processes are inevitable. In the present investigation, 3D printing technology was used to reduce the wastage and to cover defective regions in leather. The present study focuses on synthesis of acrylic binder using emulsion polymerization technique. These binders were analysed for solid content for better optimisation of the amount of binder to be utilised for finishing operation. The experimental binder was prepared with 26% solids. Particle size and thermogravimetric analyses were carried out to understand the size and shape of the particles and their thermal… More >

Jai Hak Park^*

Digital Engineering and Digital Twin, Vol.2, pp. 79-101, 2024, DOI:10.32604/dedt.2024.047280

Abstract A finite element alternating method has been known as a very convenient and accurate method to solve two and three-dimensional crack problems. In this method, a general crack problem is solved by a superposition of two solutions. One is a finite element solution for a finite body without a crack, and the other is an analytical solution for a crack in an infinite body. Since a crack is not considered in a finite element model, generating a model is very simple. The method is especially very convenient for a fatigue crack growth simulation. Over the past 40 years, S. N.… More >

Julien Biaudet^1,*, Lisa Laroussi-Libeault², Mauricette Michallet³, Laurie Panse², Raymond Merle⁴

Psycho-Oncologie, Vol.18, No.1, pp. 17-22, 2024, DOI:10.32604/po.2023.043536

Abstract Cet article vise à partager une expérience innovante d’organisation et de financement de la recherche ayant impliqué les premiers concernés : les patients. Le groupe de travail « ECLAIR » du Cancéropôle Lyon Auvergne-Rhône-Alpes (CLARA) a été créé en fin d’année 2020 dans le but de contribuer à l’élaboration d’un appel à projets portant sur l’expérience patient en cancérologie, ouvert en janvier 2021. Constitué au départ de 8 membres dont 7 patients, coordonné par un chef de projets du CLARA, le groupe de travail ECLAIR a activement contribué à l’écriture du cahier des charges de l’appel à projets, à l’élaboration… More >

Ruiqiong Wang¹, Tiantian Du², Jinchen Cao^2,*, Guoqiang Wang³

Frontiers in Heat and Mass Transfer, Vol.22, No.1, pp. 129-139, 2024, DOI:10.32604/fhmt.2024.047825

Abstract With the advancement of oilfield extraction technology, since oil-water emulsions in waxy crude oil are prone to be deposited on the pipe wall, increasing the difficulty of crude oil extraction. In this paper, the mesoscopic dissipative particle dynamics method is used to study the mechanism of the crystallization and deposition adsorbed on the wall. The results show that in the absence of water molecules, the paraffin molecules near the substrate are deposited on the metallic surface with a horizontal morphology, while the paraffin molecules close to the fluid side are arranged in a vertical column morphology. In the emulsified system,… More >

Dewi Puspitasari¹, Diah Kusuma Pratiwi¹, Pramadhony Amran², Kaprawi Sahim^1,*

Frontiers in Heat and Mass Transfer, Vol.22, No.1, pp. 305-315, 2024, DOI:10.32604/fhmt.2023.041882

Abstract The natural convection from a vertical hot plate with radiation and constant flux is studied numerically to know the velocity and temperature distribution characteristics over a vertical hot plate. The governing equations of the natural convection in two-dimension are solved with the implicit finite difference method, whereas the discretized equations are solved with the iterative relaxation method. The results show that the velocity and the temperature increase along the vertical wall. The influence of the radiation parameter in the boundary layer is significant in increasing the velocity and temperature profiles. The velocity profiles increase with the increase of the radiation… More >

Albert Osom¹, Krysta S. Barton², Katie Sexton^3,4, Lyndia Brumback¹, Joyce P. Yi-Frazier⁴, Abby R. Rosenberg^5,6, Ruth Engelberg⁷, Jill M. Steiner^8,*

Congenital Heart Disease, Vol.19, No.1, pp. 33-48, 2024, DOI:10.32604/chd.2024.046656

Abstract Social determinants of health (SDOH) affect quality of life. We investigated SDOH impacts on self-perceived resilience among people with adult congenital heart disease (ACHD). Secondary analysis of data from two complementary studies: a survey study conducted May 2021–June 2022 and a qualitative study conducted June 2020–August 2021. Resilience was assessed through CD-RISC10 score (range 0–40, higher scores reflect greater self-perceived resilience) and interview responses. Sociodemographic and SDOH (education, employment, living situation, monetary stability, financial dependency, area deprivation index) data were collected by healthcare record review and self-report. We used linear regression with robust standard errors to analyze survey data and… More > Graphic Abstract

A. Valan Arasu^a,*, Agus P. Sasmito^b,†, Arun S. Mujumdar^b

Frontiers in Heat and Mass Transfer, Vol.2, No.4, pp. 1-7, 2011, DOI:10.5098/hmt.v2.4.3005

Abstract The heat transfer enhancement of paraffin wax, a cheap and widely used latent heat thermal energy storage material, using nanoparticles is investigated. The effects of nanoparticle volume fraction on both the melting and solidification rates of paraffin wax are analysed and compared for Al₂O₃ and CuO nanoparticles. Present results show that dispersing nanoparticles in smaller volumetric fractions increase the heat transfer rate. The enhancement in thermal performance of paraffin wax is greater for Al₂O₃ compared with that for CuO nanoparticles. More >

Christian Rauch^*

Frontiers in Heat and Mass Transfer, Vol.2, No.3, pp. 1-8, 2011, DOI:10.5098/hmt.v2.3.3006

Abstract In recent years, significant effort has been placed into developing automated multi-physics simulation. The exchange of boundary conditions has lead to more realistic as well as more complex simulations with usually slower convergence rate when the coupling is being performed between two different codes. In this paper the equations of local sensitivities for element centered steady-state combined convection, conduction, and thermal radiation problems are being derived. A numerical analysis on the stability of the solution matrix is being conducted. Partial uncertainties and the relative importance of the heat transfer modes are investigated by their uncertainty factors and conclusions are being… More >

Seoyun Kim^1,#, Hyerim Yu^2,#, Jeewoo Yoon^1,3, Eunil Park^1,2,*

Computer Systems Science and Engineering, Vol.48, No.2, pp. 413-429, 2024, DOI:10.32604/csse.2023.041575

Abstract Given the increasing number of countries reporting degraded air quality, effective air quality monitoring has become a critical issue in today’s world. However, the current air quality observatory systems are often prohibitively expensive, resulting in a lack of observatories in many regions within a country. Consequently, a significant problem arises where not every region receives the same level of air quality information. This disparity occurs because some locations have to rely on information from observatories located far away from their regions, even if they may be the closest available options. To address this challenge, a novel approach that leverages machine… More >